HighPoint Technologies, Inc.
HPT366 Host Adapter Device Driver
BIOS Revision 1.25.0
#############################################################################
Revision History:
1.25.0 04Apl00
. Fix problems with Diamond Fireport 40 SCSI adapters
1.24.0 06Mar00
. Add IC controller revision control
. Users need to update related OS drivers if cuurent BIOS v1.24
or above is used
1.23.0 28Jan99
. Increase delay time while scanning devices. Some devices need
more time to be ready after reset
1.22.0 . Fix compatability problem of Seagate Barracuda hard disks
1.21.0 . Fix BIOS display overlapped with SCSI type controller. BIOS
should clean up screen whenever the initialization is done.
. Fix BIOS not be recognized on certain PCI slot. This is
caused by BIOS scanning the wrong PCI slot address.
1.20.0 . Change BIOS interface to allow users to alter disk timing mode
and select bootable disk on U66 channels.
. Fix not compatible with Phoneix BIOS which is caused by
the Int13h extend functions implementation in previous changes.
. Fix compatibility with AOpen AX6BC Pro mainboard.
1.10.0 . Fix interrupt problem which will cause system won't
boot up if HPT366 plugs in different PCI slots.
. Add Int13h extended functions which are required for WHQL.
1.00.9 . Fix compatibility problem on WD205AA hard disk.
1.00.8 . Fix timing table setting on PIO1/PIO0 and DMA1.
. Fix scanning error on Intel 810 chipset.
. Fix ZIP drive problem.
. Fix detection devices problem if only "Slave" channel.
device exists
1.00.7 . Support more than one HPT366 adapters on NT4.0 system.
1.00.0 . Offical release.
#############################################################################
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.