1. DigitalFN100PCI.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (DigitalFN100PCI.zip)

****************************************************************************
            Digital FN100 PCI Fast Ethernet Adapter Installation
                   for Windows NT 3.51 Driver
****************************************************************************

Driver File: .\gfcnic.sys
INF File:    .\oemsetnt.inf

To install the Digital FN100 PCI Fast Ethernet adapter and driver for use with
Windows NT 3.51, please do the following:

1.  Power off your PC and install the adapter in a PCI slot in your PC.

2.  Reboot the computer using the Windows NT operating system.

3.  Open the Control Panel, which is found in the Main program group of the
    Program Manager.

4.  Start the Network control panel item.

5.  Select the "Add Adapter..." option. In the list that appears, scroll to
    the bottom and select the option "<Other> Requires disk from manufacturer".
    Click on "Continue".

6.  Insert the "Digital FN100 PCI Fast Ethernet Adapter Drivers Disk" in your floppy
    drive and specify the correct path, e.g. A:\NT35 or B:\NT35, then click OK.

7.  In the list that appears, double-click on one of the following:

    "Digital FN100 PCI Fast Ethernet Adapter"

8.  In the dialog box that appears, select the Media Type and enter the
    Network address for the adapter if necessary(You can click Help for more
    detailed information about these settings).
    Click OK to complete this dialog box (or Cancel to terminate the
    configuration without completing it).

9.  Exit the Network control panel window. Windows NT asks if you wish to
    reboot. You must reboot before the adapter will function properly.





        Digital FN100 PCI Fast Ethernet Adapter Installation
                     for Windows 95 Driver
            ==========================================

driver file:  .\gfcnic.sys
INF file:     .\netgfc.inf

Install The Driver
------------------

1.  Install the card in the PCI slot and connect the cable to the network;
    turn on the computer and start Windows 95. **HAVE YOUR WINDOWS 95 CD
    ROM AVAILABLE** because you will need to copy some additional system
    files.

2.  When Windows 95 starts, a "New Hardware Found" dialog box appears
    identifying the card as a "PCI Ethernet Controller". Select
    "Driver from disk provided by the hardware manufacturer" then click OK.

    NOTE, if the "New Hardware Found" dialog box does not appear, please
    do the followings

    a. After entering Windows 95, double click "My Computer".
    b. Double click "Control Panel".
    c. Double click "System".
    d. Click the "Device Manager" tab.
    e. Open "Other Devices" (with "?" icon on it).
    f. Select "PCI Ethernet Controller" then click "Remove" button.

       Note, if you do not see any "PCI Ethernet Controller", Windows 95
       fails to detect your adapter. There may be problem with the adapter
       itself or with the system BIOS.

    g. Restart Windows 95 and goto step 2.

3.  Insert the "Digital FN100 PCI Fast Ethernet Aapter Drivers Disk" in your floppy
    drive and specify the correct path, i.e. A:\Win95 or B:\Win95,
    then click OK.

4.  Follow the rest screen instructions to complete the installation.

5.  You should restart your computer for the changes to take effect after
    the installation is complete.


Adapter Configuration
---------------------

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "Network" icon.
4. Select
   "Digital FN100 PCI Fast Ethernet Adapter"
   then click "Properties..." button.
5. Click "Advanced" tab.
6. Here, you can set the following properties:

   <1>. MediaType

             100BaseTX
             100BaseTX Full_Duplex
             10BaseT Full_Duplex
             10BaseT
             AUTO_CONFIG   ;Default value if not set

   <2>. NetworkAddress

             Override the adapter's Ethernet address. Legal values are
             xx-xx-xx-xx-xx-xx, where xx is a hexadecimal byte value.
             Unless necessary, do NOT modify this field and let the
             system use the default Ethernet address contained in the
             serial ROM on the adapter.

7. After setting the properties, you must restart your computer to
   make the changes effective.

---End of File---