;******************************************************************************
;* COPYRIGHT (C) 2002 TEXAS INSTRUMENTS INCORPORATED.
;* ALL RIGHTS RESERVED. ONLY USE WITH TEXAS INSTRUMENTS SILICON.
;******************************************************************************
;*
;* FILE: UmpUsbXP.INF
;* SUBSYSTEM: UMP Devices
;*
;* ABSTRACT: Texas Instruments Driver Installation file for
;* a UMP Device main driver.
;* UMP installation file for TIUSB3410 and TIUSB5052
;*
;* REVISION HISTORY:
;*
;* STR # INIT DATE SHORT TITLE
;* [.....] PJG 08/20/02 Initial revision of win200/XP....................
;* [.....] PJG 10/21/02 Fix Parity and GetCommStatus on reads............
;* [.....] DWB 10/30/02 Fix Timeout timing/Win2K UNINSTALL hang..........
;* [.....] DWB 17 JUL 03 Create EVM eeprom pid to differentiate GPIO/UART.
;* [.....] BK 24 NOV 03 Engr Bld 1.2.10.84 for 2k/XP enum, DUN, etc......
;* [.....] BK 22 DEC 03 Engr Bld 1.2.10.85 (*SPECIAL*) floating MSR w/a .
;* DSR=DCD=RI=0 whatever FW messages say...........
;* [.....] BK 23 DEC 03 Engr Bld 1.2.10.86 (SetMSRLines tags in INF/registry
;* control floating MSR w/a in driver.
;* [.....] BK 05 JAN 04 Engr Bld 1.2.10.87 Fix COM port assignment
;* [.....] BK 14 JAN 04 Engr Bld 1.2.10.88 Fix DUN surprise disconnect
;* [xxxxx] JCR 11 FEB 04 Engr Bld 1.2.10.90 Fix race condition on surprise removal
;* [xxxxx] JCR 19 FEB 04 Engr Bld 1.2.10.91 Fix the wait for threads......
;* [xxxxx] BK 12 JUN 04 Engr Bld 1.2.10.95 INF can set custom port display names
;* [xxxxx] BK 07 JUL 04 1.2.10.95 Add PID_505A for EEPROM boot header
;* [xxxxx] nnn dd mmm yy .................................................
;*
;******************************************************************************
;*
[Version]
signature="$WINDOWS NT$"
Class = MultiportSerial
ClassGuid = {50906cb8-ba12-11d1-bf5d-0000f805f530}
Provider=%TIInc%
CatalogFile=UMPUSBXP.cat
;* LayoutFile=LAYOUT.INF
DriverVer = 07/15/2004,1.2.10.96
[Manufacturer]
%TI.Mfg%=TI.Section
[ControlFlags]
ExcludeFromSelect = *
[SourceDisksNames]
1 = %DiskName%
[SourceDisksFiles]
umpf3410.i51=1
umpf5052.i51=1
umpusbxp.sys=1
[DestinationDirs]
DefaultDestDir=11 ; LDID_SYS
;
UMPUSB.CopyFiles.NT = 10, system32\drivers
TI5052.CopyFiles.NT = 10, system32\drivers
;TI5152.CopyFiles.NT = 10, system32\drivers
TI3410.CopyFiles.NT = 10, system32\drivers
;----------------------------------------------------------------------------------
;----------------------------------------------------------------------------------
; 5052
;----------------------------------------------------------------------------------
;----------------------------------------------------------------------------------
[TI5052.Boot.NT]
CopyFiles=UMPUSB.CopyFiles.NT,TI5052.CopyFiles.NT
AddReg=TI5052.AddReg.NT
[TI5052.Dev.NT]
CopyFiles=UMPUSB.CopyFiles.NT,TI5052.CopyFiles.NT
AddReg=TI5052.AddReg.NT
[TI5052.Boot.NT.HW]
AddReg=TI5252.Generic.Addreg.NT.HW, TI5052.AddReg.NT.HW
[TI5052.Dev.NT.HW]
AddReg=TI5252.Generic.Addreg.NT.HW, TI5052.Dev.AddReg.NT.HW
[TI5052.AddReg.NT]
;HKR,,EnumPropPages32,,"usbui.dll,USBHubPropPageProvider"
[TI5252.Generic.Addreg.NT.HW]
HKR,,NumComPorts,%REG_DWORD%,2
HKR,,NumLptPorts,%REG_DWORD%,0
[TI5052.AddReg.NT.HW]
HKR,,ImageFile,,"\SystemRoot\System32\drivers\umpf5052.i51"
HKR,,TIDeviceType,,"TILDR5052"
[TI5052.Dev.AddReg.NT.HW]
HKR,,ImageFile,,"\SystemRoot\System32\drivers\umpf5052.i51"
HKR,,TIDeviceType,,"TIUSB5052"
; **** Release 1.2.10.96: These lines set the Virtual COM Port HW ID *****
; **** Vendor replace Texas Instruments VID with your own VID *****
;HKR,,Port1DeviceHWID,,"VID_0451_com" ; set to "VID_0451_com" for common port names
;HKR,,Port2DeviceHWID,,"VID_0451_com"
HKR,,Port1DeviceHWID,,"VID_0451_port1" ; set to "VID_0451_port1" for different port names
HKR,,Port2DeviceHWID,,"VID_0451_port2"
; ****
[TI5052.CopyFiles.NT]
umpf5052.i51
;----------------------------------------------------------------------------------
;----------------------------------------------------------------------------------
; 3410 -- Unitary driver. Bootloader and driver are same instance.
;----------------------------------------------------------------------------------
;----------------------------------------------------------------------------------
[TI3410.Uni.NT]
;CopyFiles=UMPUSB.CopyFiles.NT,TI3410.CopyFiles.NT
DelFiles=UMPUSB.DelFiles
AddReg=TI3410.AddReg.NT
[TI3410.Uni.NT.HW]
AddReg=TI3410.AddReg.NT.HW
[TI3410.Dev.NT]
CopyFiles=UMPUSB.CopyFiles.NT,TI3410.CopyFiles.NT
DelFiles=UMPUSB.DelFiles
AddReg=TI3410.AddReg.NT
[TI3410.Dev.NT.HW]
AddReg=TI3410.AddReg.NT.HW
[TI3410.AddReg.NT]
;HKR,,EnumPropPages32,,"usbui.dll,USBHubPropPageProvider"
[TI3410.AddReg.NT.HW]
HKR,,ImageFile,,"\SystemRoot\System32\drivers\umpf3410.i51"
HKR,,SetMSRLinesZero,%REG_BINARY%,0x00 ; 0x80=DCD 0x40=RI 0x20=DSR 0x10=CTS
HKR,,SetMSRLinesOne, %REG_BINARY%,0x00 ; 0x80=DCD 0x40=RI 0x20=DSR 0x10=CTS
HKR,,NumComPorts,%REG_DWORD%,1
HKR,,NumLptPorts,%REG_DWORD%,0
HKR,,TIDeviceType,,"TIUSB3410"
; **** Release 1.2.10.96: Theis line sets the Virtual COM Port HW ID *****
; **** Vendor replace Texas Instruments VID with your own VID *****
HKR,,Port1DeviceHWID,,"VID_0451_com"
; ****
[TI3410.CopyFiles.NT]
umpf3410.i51
[TI3410.Uni.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService
[TI3410.Dev.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService
[TI3410.Uni.NT.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService
[TI3410.Dev.NT.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService
[TI5052.Boot.NT.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService
[TI5052.Dev.NT.Services]
AddService = umpusbxp, 0x00000002, StandardUMPUSB.AddService
[StandardUMPUSB.AddService]
DisplayName = %StandardUMPUSB.SvcDesc%
ServiceType = 1 ; SERVICE_KERNEL_DRIVER
StartType = 3 ; SERVICE_DEMAND_START
ErrorControl = 1 ; SERVICE_ERROR_NORMAL
ServiceBinary = %12%\umpusbxp.sys
LoadOrderGroup = Base
; =================== Sections ==================================
; NOTE: All 5152 chipset IDs are now aliased to 5052.
[TI.Section]
%PID_3410.DeviceDesc%=TI3410.Uni,USB\VID_0451&PID_3410
%PID_341A.DeviceDesc%=TI3410.Uni,USB\VID_0451&PID_341A
%PID_5052.DeviceDesc%=TI5052.Boot,USB\VID_0451&PID_5052
%PID_5052.DeviceDesc%=TI5052.Boot,USB\VID_0451&PID_505A
%PID_505F.DeviceDesc%=TI5052.Dev,USB\VID_0451&PID_505F
%PID_5052.DeviceDesc%=TI5052.Boot,USB\VID_0451&PID_5152
%PID_505F.DeviceDesc%=TI5052.Dev,USB\VID_0451&PID_515F
; =================== Global ==================================
[UMPUSB.CopyFiles.NT]
umpusbxp.sys,,,0x00000004
[UMPUSB.DelFiles]
; =================== Strings ==================================
[Strings]
TIInc="Texas Instruments, Inc"
USBClassName="TI UMP Devices"
StandardUMPUSB.SvcDesc="Texas Instruments UMP Device Driver"
TI.Mfg="Texas Instruments"
DiskName="TI UMP Installation Disk"
;PID_3410.DeviceDesc="TUSB3410 Device"
PID_3410.DeviceDesc="TUSB3410"
PID_341A.DeviceDesc="TUSB3410 UART EVM"
PID_5052.DeviceDesc="TUSB5052 Loader"
PID_505F.DeviceDesc="TUSB5052"
PID_515F.DeviceDesc="TUSB5152"
REG_BINARY =0x00000001
REG_DWORD =0x00010001
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.