EN2212.INF Driver File Contents (AcctonEN2212PCMCIACardEthernetDrivers.exe)

; EN2212.INF
;
; Ethernet PCMCIA Adapter INF file for Windows 95
;

[version]
signature="$CHICAGO$"
Class=Net
provider=%V_MS%

[Manufacturer]
%V_ACCTON%=ACCTON

[ACCTON]
%ACCTON.DeviceDesc%=ETHPCM95.ndi,PCMCIA\ACCTON-EN2212-C817

;****************************************************************************
;    ACCTON EN2212 PCMCIA Ethernet Adapter
;****************************************************************************

[ETHPCM95.ndi]
AddReg=EN2212.ndi.reg,ETHPCM95.ndi.reg 

[EN2212.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\ACCTON-EN2212-C817"

[ETHPCM95.ndi.reg]
; key,subkey,valuname,type,value
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,ETHPCM95.SYS
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"

; NDIS Info
HKR,NDIS,LogDriverName,,"ETHPCM95"
HKR,NDIS,MajorNdisVersion,1,03
HKR,NDIS,MinorNdisVersion,1,0A

HKR,NDI,CardType,,"PCMCIA"

; Interfaces

HKR,Ndi\Interfaces,DefUpper,,"ndis3"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,UpperRange,,"ndis3"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"

; Install sections
HKR,Ndi\Install,ndis3,,"ETHPCM95.ndis3"

; Parameters
HKR,,INTERRUPTNUMBER,1,04,00,00,00
HKR,,IOBASEADDRESS,1,02,00,00,00
HKR,,ATTRIBUTEMEMBASE,1,01,00,00,00


; OVERRIDE FOR 4K RAM WINDOW INTO THE TUPLE
HKR,Override,0000,1,\
;
00,04,00,00, \      ; CONFIGMG_VERSION
00,00,00,00, \      ; PRIORITY
;
; I/O Resource Descriptor
;
24,00,00,00, \      ; Total length of I/O Resource Descriptor
02,00,00,00, \      ; ResType_IO = 0x00000002
01,00, \            ; IOD_Count;
0C,00, \            ; IOD_Type;         // IOType_Range = 0x000C
00,00, \            ; IOD_Alloc_Base;
00,00, \            ; IOD_Alloc_End;
00,00, \            ; IOD_DesFlags;
00, \               ; IOD_Alloc_Alias;
00, \               ; IOD_Alloc_Decode;
E0,FF, \            ; IOR_Align;        // Mask for base alignment
20,00, \            ; IOR_nPorts;       // Number of ports
00,02, \            ; IOR_Min;          // Min port address
FF,03, \            ; IOR_Max;          // Max port address
00,00, \            ; IOR_RangeFlags;   // Flags
00, \               ; IOR_Alias;        // Alias offset
00, \               ; IOR_Decode;       // Address specified
40,00,00,00, \      ; PCCARD flags, 0x40 = 16-bit port
;
; IRQ Resource Descriptor
;
14,00,00,00, \      ; Total length of IRQ Resource Descriptor
04,00,00,00, \      ; ResType_IRQ = 0x00000004
00,00, \            ; IRQD_Flags;
00,00, \            ; IRQD_Alloc_Num;   // Allocated IRQ number
FF,FF, \            ; IRQD_Req_Mask;    // Mask of possible IRQs
00,00, \            ; IRQD_Reserved;
20,00,00,00, \      ; PCCARD flags, 0x20 = Level mode interrupts
;
; Memory Resource Descriptor 
;
34,00,00,00, \      ; Total length of Memory Resource Descriptor
01,00,00,00, \      ; ResType_Mem = 0x00000001
01,00, \            ; MD_Count;
14,00, \            ; MD_Type;          // MType_Range = 0x0014
00,00,00,00, \      ; MD_Alloc_Base;
00,00,00,00, \      ; MD_Alloc_End;
00,00, \            ; MD_Flags;
00,00, \            ; MD_Reserved;
00,F0,FF,FF, \      ; MR_Align;         // Mask for base alignment
00,10,00,00, \      ; MR_nBytes;        // Count of bytes (4K)
00,00,00,00, \      ; MR_Min;      // Min Address
FF,FF,FF,FF, \      ; MR_Max;      // Max Address
00,00, \            ; MR_Flags;         // Flags
00,00, \            ; MR_Reserved;
02,00,00,00, \      ; PCCARD flags, 0x02 = attribute mem, or
                    ;         0x08 = 16-bit common mem
00,00,00,00, \      ; Memory card address
;
; REQUEST_CONFIG_PKT Descriptor
;
19,00,00,00, \      ; Total length of REQUEST_CONFIG_PKT Descriptor
7C,89,00,00, \      ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C
00,00, \            ; Socket;
02,00, \            ; Attributes;
32, \               ; Vcc;
32, \ 		    ; Vpp1;
32, \ 		    ; Vpp2;
02, \               ; IntType;
00,01,00,00, \      ; ConfigBase;
00, \               ; Status;
00, \               ; Pin;
00, \               ; Copy;
00, \               ; ConfigIndex;
00, \               ; Present;
;
00,00,00,00         ; TERMINATOR

; Install NDIS3
[ETHPCM95.ndis3]
CopyFiles=ETHPCM95.ndis3.CopyFiles

[ETHPCM95.ndis3.CopyFiles]
ETHPCM95.SYS

;****************************************************************************
; Destination Directories
;****************************************************************************
[DestinationDirs]
DefaultDestDir              =11 ; LDID_SYS
ETHPCM95.ndis3.CopyFiles      =11

;****************************************************************************
; Source Diskette
;****************************************************************************
[SourceDisksNames]
1 = %EN2212_install_disk%,V110,0000-0000


;****************************************************************************
; Source files in diskette
;****************************************************************************
[SourceDisksFiles]
ETHPCM95.SYS = 1

;****************************************************************************
; Localizable Strings
;****************************************************************************
[strings]
; Provider
V_MS="Microsoft"
; Manufacturers
V_ACCTON="Accton Technology Corporation"
; Accton EN2212 PCMCIA Adapter
ACCTON.DeviceDesc="Accton EN2212 Ethernet PCMCIA Adapter"
EN2212_install_disk="Accton EN2212 Installation Diskette"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.47