Accton Technology Corporation PC-NFS Software Interface Program Installation For EN2212 Ethernet PCMCIA Adapters Copyright (C) 1994, 1995 by Accton Technology Corporation. All rights reserved. Use the Accton EN2212 Ethernet LAN Adapter and the Accton PC-NFS Software Interface Program, you can run the Sun MicroSystems PC-NFS on your PC. The following files will be used in this installation: Files Contents -------------------------------------------------------------- PCNFSIF.SYS PC-NFS Software Interface Program PCMPD.COM Accton Packet Driver for NE & WD serials cards INSTALLATION PROCEDURE: 1. Start the installation process by following the procedure described in the PC-NFS Manual for installing the Sun Microsystems PC-NFS program in your PC's hard disk. When asked to identify the type of network interface card, select "WD8003" from the list. Likewise, when asked for the interrupt level and the base I/O address, select: Interrupt Level (IRQ) 5 I/O Base Address 300h 2. Copy the following files to the \NFS directory on your hard disk: ACCOPEN.EXE PCNFSIF.SYS PCMPD.COM 3. Modify the config.sys file to include the following: DEVICE=C:\ANSI.SYS DEVICE=C:\NFS\ACCOEPN.EXE /int=5 /port=300 DEVICE=C:\NFS\PCNFS.SYS DEVICE=C:\NFS\SOCKDRV.SYS DEVICE=C:\NFS\PCNFSIF.SYS LASTDRIVE=V 4. Create or modify an existing autoexec.bat file to include the following: C:\NFS\PCMPD 98 SET PATH = C:\; C:\NFS SET TZ=CST6 SET NFSDRIVE=C PRT * NFSRUN For your system to work properly, make sure the C:\NFS\PCMPD 98 command line is placed before the NFSRUN command line. Allowable values for the software interrupt vector range from 96 to 128. The default software interrupt vector value is 98. 5. Reboot the PC and start the PC-NFS program. You may now run PC-NFS commands on your PC to communicate with other computers on the network that use the TCP/IP protocol. -- THE END --Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.