****************************************************************************
Network Everywhere
PCI 10/100 Fast Ethernet Adapter
NDIS 3/4 driver For Windows NT 3.51/4.0 Installation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Copyright (C) 2000 Network Everywhere.
All rights reserved.
****************************************************************************
The drivers contained in the directory \WINNT is for the
Network Everywhere 10/100 Fast Ethernet Adapter Version 2
They are used with Microsoft Windows NT Release 3.51 or 4.0 on the X86
platform. The driver named FastNIC conforms to the Network Driver Interface
Specification (NDIS) 3.0 & 4.0.
File Description
----------------
Filename Description
----------------------------------------------------------------------------
WNT40\NC100.SY_ NDIS 4 driver for PCI 10/100 Fast Ethernet Adapter
on NT 4.0
WNT40\NC100A.SY_ NDIS 4 driver for PCI 10/100 Fast Ethernet Adapter Version 2
on NT 4.0
WNT35\NC100.SY_ NDIS 3 driver for PCI 10/100 Fast Ethernet Adapter
on NT 3.51
WNT35\NC100A.SY_ NDIS 3 driver for PCI 10/100 Fast Ethernet Adapter Version 2
on NT 3.51
NC100A.HL_ the help file for NC100 10/100 Fast Ethernet Adapter Version 2
NC100.HL_ the help file for NC100 10/100 Fast Ethernet Adapter
README.TXT this documentation file
----------------------------------------------------------------------------
Installing driver on Microsoft Windows NT 3.51
----------------------------------------------
1. From the Main group of NT, choose the Control Panel icon.
2. From the Control Panel window, choose the Network icon.
3. From the Network Settings dialog box, choose the Add Adapter button.
The Add Network Adapter dialog box appears.
4. From the list of network cards, select "<other> Requires disk from
manufacturer", and then press <Enter> button.
5. Insert this driver disk in drive A, enter drive and pathname A:\ and
then choose the OK button.
6. In the Select OEM Option dialog box, you will see the following
products in the menu, select the exact product and use the OK button
to install it.
Network Everywhere 10/100 Fast Ethernet Adapter Version 2
7. And then PCI 10/100 Fast Ethernet Adapter Setup dialog box appear, you
must specify "Media Type" of the adapter plugged in your PC. Because
netcard detection function does not support in SETUP program, please
make sure these settings match your adapter's configuration. Otherwise
the network ability of Windows NT can not work properly.
The connection types for NC100 Adapter are
-----------------------------------------------------------------------
AutoSense ; performs automatic media detection during
; driver initialization.
10BaseT ; RJ-45 connector, line speed is 10 Mega
; bits per second.
10BaseT Full_Duplex ; communication in full duplex mode, speed
; is 20Mbps.
100BaseTx ; RJ-45 connector, line speed is 100 Mega
; bits per second.
100BaseTx Full_Duplex ; communication in full duplex mode, speed
; is 200Mbps.
-----------------------------------------------------------------------
8. After that, installation is completed. NC100 adapter becomes one of
the Installed Adapter Cards and the driver becomes one of the Installed
Network Software.
You can see: "[x]Network Everywhere 10/100 Fast Ethernet Adapter Version 2"
within the Installed Adapter Cards menu and "Network Everywhere 10/100 Fast
Ethernet Adapter Driver" within the Installed Network Software menu.
9. Now, the SETUP program has already copied NC100A.SY_ from the
A:\WINNT\WNT35 directory to C:\WINNT\SYSTEM32\DRIVERS\NC100A.SYS and
the OEMSETNT.INF from A:\ to C:\WINNT\SYSTEM32 but renamed it to
another installation information file (like OEMNAD??.INF). So the next
time, if you want to add FASTNIC adapters to your system, you do not
need the floppy diskette again.(You can skip the file copy operation of
inserting floppy diskette again)
NOTICE!! C:\WINNT is the directory where your NT O.S. is located.
10. To complete network installation, remember to bind the adapter to
transport drivers by choosing the "Bindings" button under the Network
Setting dialog box.
11. After restarting your system, you will acquire network service.
Installing driver on Microsoft Windows NT 4.0
---------------------------------------------
1. Click the "Start" command button, select the "Settings" icon to display
an option list under it.
2. Click the "Control Panel" icon.
3. Double-click the "Network" icon.
4. Select the "Adapters" item, then click the "Add..." button in the
"Network" dialog box.
5. Click the "Have Disk..." button in the "Select Network Adapter" dialog
box.
6. Insert the Driver Diskette in your floppy drive. Enter the full
pathname A:\ of the driver installation information file (OEMSETNT.INF)
in the "Insert Disk" dialog box, then click the OK button.
7. Select "Network Everywhere 10/100 Fast Ethernet Adapter Version 2",
then click the OK button in the "Select OEM Option" dialog box.
8. And then Network Everywhere 10/100 Fast Ethernet Adapter Setup dialog box
appear, you must specify "Media Type" of the adapter plugged in your PC.
Because netcard detection function does not support in SETUP program,
please make sure these settings match your adapter's configuration.
Otherwise the network ability of Windows NT can not work properly.
The connection types for NC100 Adapter are
-----------------------------------------------------------------------
AutoSense ; performs automatic media detection during
; driver initialization.
10BaseT ; RJ-45 connector, line speed is 10 Mega
; bits per second.
10BaseT Full_Duplex ; communication in full duplex mode, speed
; is 20Mbps.
100BaseTx ; RJ-45 connector, line speed is 100 Mega
; bits per second.
100BaseTx Full_Duplex ; communication in full duplex mode, speed
; is 200Mbps.
----------------------------------------------------------------------
9. To complete network installation, remember to bind the adapter to the
transport drivers by choosing the "Bindings" button from the "Network"
dialog box.
10. Click the "Close" button in the "Network" dialog box.
11. Remove the Driver Diskette from your floppy drive.
12. Restart your computer to initialize the network function.
Trademarks:
Microsoft Windows NT is a trademark of Microsoft Corporation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.