Ether16 LAN Card Setup
for IBM LAN Support 1.3x & 4.x
-----------------------------------------------------------------
Contents:
Before You Begin
Setup
for 1.3x
for 4.x
Technical Support
--------------------------------------------------------------------------
BEFORE YOU BEGIN
--------------------------------------------------------------------------
If your computer does NOT have a plug-and-play motherboard,
the following notes apply to you:
1. Before attempting to install the Ether16 LAN Card's network
software drivers, you MUST configure the card's internal
settings with the SETUP program included on Ether16 disk 1
under the UTILITY directory. Use the program to set the
card's interrupt (IRQ) and I/O settings. For directions
on using SETUP, see your Ether16 user guide.
2. Most network software packages like Windows 95, Windows NT,
Novell NetWare, etc., include a "generic" network driver
that will work with a wide range of network cards. This
generic driver is called a "Novell NE2000" compatible driver,
and it is fully supported by the Ether16 card. If your
network software package asks you to choose the name of
the network card you're installing from a list of available
adapters, and you find "NE2000" or "Novell NE2000" listed,
you don't need to follow the directions below---simply choose
to install the NE2000 driver and the Ether16 Card will be
ready for use. THE ETHER16 IS ONLY NE2000 COMPATIBLE
WHEN THE CARD'S PLUG-AND-PLAY MODE IS TURNED OFF. If
your PC has a plug-and-play motherboard, and you wish to
use the generic NE2000 driver, you must run the Ether16
SETUP program and turn the card's plug-and-play mode off.
Setup
------------------------------------------------------------------
FOR VERSION 1.3X
Insert the LAN Support diskette in Drive A.
Run the install program.
A:\> DXMAID [Enter]
The following message then appears:
"Do you have driver diskettes?" [Yes]
(You can press [Space] to switch no to yes.)
If asked to supply the path to the Ether16 driver disk, insert
disk 1 into drive A and type:
A:\NDIS\DOS
When the installation is complete, restart your PC and login.
FOR VERSION 4.X
Run the installation program (INSTALL)
on the IBM DOS LAN SERVICES diskette.
From the Network card field,
select "Network card not shown in list below..."
If asked to supply the path where the Ether16 driver is located,
insert Ether16's disk 1 into drive A and type:
a:\ndis\dos
When the installation is complete, restart your PC and login.
HOW TO GET TECHNICAL SUPPORT
------------------------------------------------------------------------
There are a variety of methods that you can use to get FREE technical help
or sales information about Linksys products.
Support Hotline (949) 261-1288
Fax (949) 261-8868
BBS (949) 261-2888 (8-N-1)
E-mail support@linksys.com
World Wide Web http://www.linksys.com
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.