1. networkcards.zip Driver
2. C32DOS.TXT File Contents

C32DOS.TXT Driver File Contents (networkcards.zip)

==================================================================
NOTES ON
Installing D-Link DE-220 Family Ethernet Adapter
For Client 32 for DOS/WIN31 Users
==================================================================
    (c) 1997 Copyright D-Link Corporation ALL RIGHTS RESERVED

This document contains DE-220 Family Ethernet Adapter installation notes,
which is not included in the DE-220 Family Ethernet Adapter USER'S GUIDE
or onscreen instructions, for Client 32 for DOS/WIN31 users.

This document contains information on the following topics:

1.0 Overview
2.0 Installation Notes For Client 32 for DOS/WIN31 users
    2.1 Windows 3.x Users
    2.2 DOS Users

-------------------------------------------------------------------

1.0 Overview
------------

To install DE-220 Family Ethernet Adapter in the Client 32 for DOS/WIN31
environment, you should have the NOVELL Client 32 CD-ROM nearby.

2.0 Installation Notes For Client 32 for DOS/WIN31 users
--------------------------------------------------------
    2.1 DOS Users
    -------------
    1. Run the Client 32 for DOSWIN installation program, using
       INSTALL.EXE.

                EX:     >cd\<PATH>      ;<PATH> is Client 32 for DOSWIN
                        >install

    2. Press ENTER or YES to accept the argeement.

    3. Select "Netware Client 32 for DOS".

    4. Select "32-bit LAN drivers" from select a LAN Driver Type window.

    5. Select "User Specified 32 Bit Driver".

    6. Specify the path for DE-220 Family Ethernet 32-Bit LAN driver.
       Example:
                A:\NETWARE\32BITLAN

    7. Select "D-Link DE-220 Family Ethernet LAN Driver" from 32-Bit
       Network Board Drivers window.

    8. There are some parameters which we need to take a explanation.

      AutoSearch Card Switch:
       The "AutoSearch Card Switch" specify the methods of searching
       adapter card's I/O Base Address. If you select "SearchOff" ,
       you must specify the right "Port" or "Slot" number in the
       "Port" or "Slot Number" options. The default value is "(none)".
       Our driver will do all things automatically.

      Is the card a Legacy ISA card ? :
       The "Is the card a Legacy ISA Card ?" specify that your adapter
       card is Non-PnP or PnP disable card model. If your card is
       Non-PnP or PnP disable , select the "ISA" value. If your card
       is PnP enable card , select "(none)" or ignore it.

      Port:
       The "Port" specify your adapter card's I/O Base Address.If you
       select "ISA" value in "Is the card a Legacy ISA Card?" option,
       you need to select a value which you actually know or ignore it.
       Usually, the driver will search the card's I/O Base Address
       automatically.

      Slot Number:
       The "Slot Number" specify your adapter card's Slot Number. If you
       select "(none)" or ignore the value in "IS the card a Legacy ISA
       Card? " option. you need to select a value which you actually know
       or ignore it. Our driver will search the card's Slot Number
       automatically.

      Early Transmit Switch:
       The "Early Transmit Switch" specify Transmit Methods.
       The meaning of values are as following:
       "1"      -> Enable Early Transmit
       "0"      -> Disable Early Transmit
       default  -> Disable Early Transmit

      JITI Function Switch:
       The "JITI Function Switch" specify JITI functional.
       The meaning of values are as following:
       "1"      -> Enable JITI Function
       "0"      -> Disable JITI Function
       default  -> Disable JITI Function

    9. Press "F10" to continue in Installation Configuration Summary
       window, if you accept.

   10. AUTOEXEC.BAT and CONFIG.SYS will be update after installation.

   11. Restart your workstation and load the NetWare networking
       software, it will connect to Netware server.

    2.2 Windows 3.x Users
    ---------------------
    1. Start Windows 3.x system

    2. Run the Client 32 for DOSWIN installation program, using
       SETUP.EXE

    3. Ex:     >cd\<PATH>      ;<PATH> is Client 32 for DOSWIN
               >setup
               or

       Double-click SETUP.EXE in "Files Manager" window.

    4. Press ENTER to accept the argeement.

    5. Specify your Target directory and Windows Directory

       Example:
       Target Directory:  C:\NOVELL\CLIENT32

       Windows Directory: C:\WIN

    6. Select "User Supplied Driver".

    7. Select "D-Link DE-220 Family Ethernet LAN Driver".

    8. Setting the parameters.
       There are some parameters which we need to take a explanation.

      Is the card a Legacy ISA card ? :
       The "Is the card a Legacy ISA Card ?" specify that your adapter
       card is Non-PnP or PnP disable card model. If your card is
       Non-PnP or PnP disable , select the "ISA" value. If your card
       is PnP enable card , select blank or ignore it.
       The default value is "ISA".

      The meaning of the other parameters are the same as the description of
      "DOS Users" section.

    9. Restart your workstation, click "Netware Login" to login Netware
       server from NetWare Tools.

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.