el.ini Driver File Contents (networkcards.zip)

[Pre Setup]
TitleName=CATC™ USB/Ethernet Link
TitleBar= CATC USB/Ethernet Link Software Setup
UnInstallName= CATC USB Ethernet Link
ProductName= CATC USB Ethernet Link Software
CompanyName= Computer Access Technology Corporation
InfString= CATC USB/Ethernet Link
DeviceName= CATC USB/Ethernet Link 
TargetIniFile= el.ini
CDMessageFlag=FALSE
DelayBeforeFinish=0
DelayAfterFinish=0
Workgroup=
ComputerName=
TimeToSetGroup=Pre
ChangeAutoInsert=TRUE

[Post CATC Setup]
ProgramToRun=NOTEPAD.EXE
DHCPOff=TRUE

[Keys to UnInstall]
DeviceDesc1=CATC USB/Ethernet Link
DeviceDesc2=CATC USB/Ethernet Link II
DeviceDesc3=CATC NetMate Link
DeviceDesc4=CATC ASIC
VidPid=VID_0423&PID_000A

[Messages]
DisconnectMessage=Disconnect the USB cable (if connected) from the CATC USB/Ethernet Link.
ConnectMessage=Connect the USB cable to the CATC USB/Ethernet Link.
ReInsertMessage=Please re-insert the CATC USB/Ethernet Link software CD
AboutToInstallMessage=Setup is about to install Networking.
InstallingMessage=Setup is currently installing Networking.
NotConnectedAbortMessage=CATC USB/Ethernet Link was not connected. Do you want to abort ?
AbortingMessage=Aborting Setup.
PreviousFoundMessage=Setup found a previous installation. Do you want to remove it ?
KeepingMessage=Keeping previous installation, Aborting.
UsbNoHwNoSwMessage=Hardware and Software support for USB was not found, aborting.
UsbNoSwMessage=Software support for USB was not found, aborting.
UsbNoHwMessage=Hardware support for USB was not found, aborting.
UsbFailedMessage=Failed to run USBReady.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.75