OEMSETUP.INF Driver File Contents (networkcards.zip)

	
[IntstallOptions]
 Install_3NIC_Diag = "NO"
 Install_Shortcuts = "NO"
 Install_Installer = "NO"	


[Identification]
 OptionType = NetAdapter


[PlatformsSupported]
 ISA
 EISA
 PCI
 "Jazz-Internal Bus"

[Options]
 3C90X 
 3C905 
 3C900 


[NDDriverConstantsNDIS3]
 ND3NDNetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el90xnd3.sys"
 ND3NDProdSWImagePath = "%SystemRoot%\System32\drivers\el90xnd3.sys"
 ND3NDProdSWUpgradePath = "\SystemRoot\System32\drivers\el90xnd3.sys"


[NDDriverConstantsNDIS4]
 ND4NDNetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el90xnd4.sys"
 ND4NDProdSWImagePath = "%SystemRoot%\System32\drivers\el90xnd4.sys"
 ND4NDProdSWUpgradePath = "\SystemRoot\System32\drivers\el90xnd4.sys"


[BCDriverConstantsNDIS3]
 ND3BCNetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\el90xbc3.sys"
 ND3BCProdSWImagePath = "%SystemRoot%\System32\drivers\el90xbc3.sys"
 ND3BCProdSWUpgradePath = "\SystemRoot\System32\drivers\el90xbc3.sys"


[BCDriverConstantsNDIS4]
 ND4BCNetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\EL90xBC4.sys"
 ND4BCProdSWImagePath = "%SystemRoot%\System32\drivers\EL90xBC4.sys"
 ND4BCProdSWUpgradePath = "\SystemRoot\System32\drivers\EL90xBC4.sys"


;**************************************************************************************************


[FileConstants]
 UtilityInf = "UTILITY.INF"
 subroutineinf = "SUBROUTN.INF"
 SWType = "driver"
 Exit_Code = 0
 IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
 NetworkCardsKey = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"
 FunctionTitle = "3Com 3C90x Adapter Card Setup"
 3CNUMBER = "3C90X"
 GROUP_NAME = "3Com EtherLink PCI NIC" 
 ProdHWXXXXXTitle = "3Com EtherLink PCI NIC "
 ProdHWXXXXXDesc = "3Com EtherLink PCI NIC "
 Manufacturer = "3Com"
 EtherDiskVersion = "5.2"
 ProdMajorVer = "1"
 ProdMinorVer = "0"
 ProdReview = "1"
 ProdVer = $(ProdMajorVer)"."$(ProdMinorVer) 
 ProdSWDesc = "3Com 3C90x Adapter BC Driver"
 ProdSWTitle = "3Com 3C90x Adapter BC Driver"
 ProdSWName = "El90x"
 NetRuleSWType = "El90xSys ndisDriver El90xDriver"
 NetRuleSWUse = $(SWType)
 NetRuleSWBindForm = """El90xSys"" yes no container"
 NetRuleSWClass = {"El90xDriver basic"}
 NetRuleSWBindable = {"El90xDriver El90xAdapter non exclusive 100"}
 ProdHWName = "El90x"
 NetRuleHWBindForm = " yes yes container"
 NetRuleHWType = "El90x El90xAdapter"
 NetRuleHWClass = {"El90xAdapter basic"}
 ProdKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProdSWName)"\CurrentVersion"
 ParamKeyName = $(!NTN_ServiceBase)"\"$(ProdHWName)"\Parameters"
 Hardware_Default = "HardwareDefault"
 DiagExe = TCAUDIAG
 NICPROP = NICPROP
 DIAGCARDTYPE = "TCAUM90X"
 TrayIconExe = TCAUDIAG
 InstallerExe = TCAUDIAG
 UnInstallerEXE = UN3C90XA
 

[BoomFileConstants]
 NDProdSWDesc = "3Com 3C90x Adapter ND Driver"
 NDProdSWTitle = "3Com 3C90x Adapter ND Driver"
 NDProdSWName = "El90xnd"
 NDNetRuleSWType = "El90xndSys ndisDriver El90xndDriver"
 NDNetRuleSWBindForm = """El90xndSys"" yes no container"
 NDNetRuleSWClass = {"El90xndDriver basic"}
 NDNetRuleSWBindable = {"El90xndDriver El90xndAdapter non exclusive 100"}
 NDProdHWName = "El90xnd"
 NDNetRuleHWBindForm = " yes yes container"
 NDNetRuleHWType = "El90xnd El90xndAdapter"
 NDNetRuleHWClass = {"El90xndAdapter basic"}
 NDProdKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(NDProdSWName)"\CurrentVersion"
 NDParamKeyName = $(!NTN_ServiceBase)"\"$(NDProdHWName)"\Parameters"


;--------------------these NICs use old NDIS4 driver --------------------------------

 ProdHW36944Title = "3Com EtherLink 10/100 PCI NIC (3C905-TX)"
 ProdHW36944Desc = "3Com EtherLink 10/100 PCI NIC (3C905-TX)"

 ProdHW36945Title = "3Com EtherLink 10/100 PCI T4 NIC (3C905-T4)"
 ProdHW36945Desc = "3Com EtherLink 10/100 PCI T4 NIC (3C905-T4)"

 ProdHW36864Title = "3Com EtherLink 10 PCI TPO NIC (3C900-TPO)"
 ProdHW36864Desc = "3Com EtherLink 10 PCI TPO NIC (3C900-TPO)" 

 ProdHW36865Title = "3Com EtherLink 10 PCI Combo  NIC (3C900-COMBO)"
 ProdHW36865Desc = "3Com EtherLink 10 PCI Combo  NIC (3C900-COMBO)" 


;--------------------these NICs use new NDIS4 driver --------------------------------

 ProdHW36952Title = "3Com EtherLink 10/100 PCI Combo NIC (3C905B-COMBO)"
 ProdHW36952Desc = "3Com EtherLink 10/100 PCI Combo NIC (3C905B-COMBO)"

 ProdHW37376Title = "3Com EtherLink 10/100 PCI NIC (3C905C-TX)"
 ProdHW37376Desc = "3Com EtherLink 10/100 PCI For Complete PC Management NIC (3C905C-TX)"

 ProdHW36949Title = "3Com EtherLink 10/100 PCI NIC (3C905B-TX)"
 ProdHW36949Desc = "3Com EtherLink 10/100 PCI TX NIC (3C905B-TX)"

 ProdHW36954Title = "3Com EtherLink 100 PCI Fiber NIC (3C905B-FX)"
 ProdHW36954Desc = "3Com EtherLink 100 PCI Fiber NIC (3C905B-FX)" 

 ProdHW36868Title = "3Com EtherLink 10 PCI TPO NIC (3C900B-TPO)"
 ProdHW36868Desc = "3Com EtherLink 10 PCI TPO NIC (3C900B-TPO)" 

 ProdHW36869Title = "3Com EtherLink 10 PCI Combo NIC (3C900B-COMBO)"
 ProdHW36869Desc = "3Com EtherLink 10 PCI Combo NIC (3C900B-COMBO)" 

 ProdHW36870Title = "3Com EtherLink 10 PCI TPC NIC (3C900B-TPC)"
 ProdHW36870Desc = "3Com EtherLink 10 PCI TPC NIC (3C900B-TPC)" 

 ProdHW36874Title = "3Com EtherLink 10 PCI Fiber NIC (3C900B-FL)"
 ProdHW36874Desc = "3Com EtherLink 10 PCI Fiber NIC (3C900B-FL)" 


;---- OLD NAMES OF 90XBC NICs, THESE NAMES USED FOR CHECKING IF THE NIC ALREADY INSTALLED 

 OLDProdHW36944Desc = "3Com Fast EtherLink XL 10/100Mb TX Ethernet NIC (3C905-TX)"
 OLDProdHW36945Desc = "3Com Fast EtherLink XL 10/100Mb T4 Ethernet NIC (3C905-T4)"
 OLDProdHW36949Desc = "3Com Fast EtherLink XL 10/100Mb TX Ethernet NIC (3C905B-TX)"
 OLDProdHW36954Desc = "3Com Fast EtherLink XL 10/100Mb FX Ethernet NIC (3C905B-FX)"
 OLDProdHW36864Desc = "3Com EtherLink XL TPO 10Mb Ethernet NIC (3C900-TPO)" 
 OLDProdHW36865Desc = "3Com EtherLink XL COMBO 10Mb Ethernet NIC (3C900-COMBO)" 
 OLDProdHW36868Desc = "3Com EtherLink XL TPO 10Mb Ethernet NIC (3C900B-TPO)" 
 OLDProdHW36869Desc = "3Com EtherLink XL COMBO 10Mb Ethernet NIC (3C900B-COMBO)" 
 OLDProdHW36870Desc = "3Com EtherLink XL TPC 10Mb Ethernet NIC (3C900B-TPC)" 
 OLDProdHW36874Desc = "3Com EtherLink XL FL 10Mb Ethernet NIC (3C900B-FL)" 
 OLDProdHW36952Desc = "3Com EtherLink XL COMBO 10/100Mb Ethernet NIC (3C905B-COMBO)"


; EtherDisk5.0 have diff. desc. for 10Mb cards, so we need to check that, too.

 ED50HW36868Desc = "3Com EtherLink PCI TPO NIC (3C900B-TPO)"
 ED50HW36864Desc = "3Com EtherLink PCI TPO NIC (3C900-TPO)"
 ED50HW36865Desc = "3Com EtherLink PCI Combo  NIC (3C900-COMBO)"
 ED50HW36869Desc = "3Com EtherLink PCI Combo NIC (3C900B-COMBO)"
 ED50HW36870Desc = "3Com EtherLink PCI TPC NIC (3C900B-TPC)" 
 ED50HW36874Desc = "3Com EtherLink PCI Fiber NIC (3C900B-FL)" 

;------------------------------------------------------------------------------------------------
 

; List of NICs
 CFIDList = {36944, 36945, 36864, 36865,36868, 36869, 36870, 36874, 36949, 36952, 36954, 37376}
 AdapterType = 5

 
[GeneralConstants]
 from = ""
 to = ""
 ExitCodeOk = 0
 ExitCodeCancel = 1 
 ExitCodeFatal = 2
 KeyNull = ""
 MAXIMUM_ALLOWED = 33554432
 RegistryErrorIndex = NO_ERROR
 KeyProduct = ""
 KeyParameters = ""
 TRUE = 1
 FALSE = 0
 NoTitle = 0
 ExitState = "Active"
 OldVersionExisted = $(FALSE)
 DriverPath = $(!STF_NTPATH)\drivers
 NT350VersionConstant = "3.50"
 NT310VersionConstant = "3.10"
 NT400VersionConstant = "(4.0)"
 INF_PROCESSER = "I386"


[date]
 Now = {} ? $(!LIBHANDLE) GetSystemDate


[Identify]
 read-syms Identification
 set Status = STATUS_SUCCESSFUL
 set Identifier = $(OptionType)
 set Media = #("Source Media Descriptions", 1, 1)
 Return $(Status) $(Identifier) $(Media)


[ReturnOptions]
 set Status = STATUS_FAILED
 set OptionList = {}
 set OptionTextList = {}
 set LanguageList = ^(LanguagesSupported, 1)
 Ifcontains(i) $($0) in $(LanguageList)
 ifstr(i) $($1) == ""
 goto returnoptions
 endif
 set PlatformList = ^(PlatformsSupported, 1)
 Ifcontains(i) $($1) in $(PlatformList)
 goto returnoptions
 else
 set Status = STATUS_NOTSUPPORTED
 goto finish_ReturnOptions
 endif
 else
 set Status = STATUS_NOLANGUAGE
 goto finish_ReturnOptions
 endif


returnoptions = +
 set OptionList = ^(Options, 1)
 set OptionTextList = ^(OptionsText$($0), 1)
 set Status = STATUS_SUCCESSFUL


finish_ReturnOptions = +
 Return $(Status) $(OptionList) $(OptionTextList)


[checkFileExist]
 DiagFound = {} ? $(!LIBHANDLE) FindFileInstances $(!STF_WINDOWSSYSPATH)"\tcaudiag.exe" 


[DiagRegistry]
 OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE" $(!REG_KEY_WRITE) SOFTKEY
 OpenRegKey $(SOFTKEY) "" "3Com" $(!REG_KEY_WRITE) COMKEY
 ifstr $(COMKEY) == ""
	CreateRegKey $(SOFTKEY) {"3Com", 0, GenericClass} "" $(!REG_KEY_WRITE) "" COMKEY
 endif
 
 OpenRegKey $(COMKEY) "" "TCAUDIAG" $(!REG_KEY_WRITE) TCAUDIAGKEY
 ifstr $(TCAUDIAGKEY) == ""
	CreateRegKey $(COMKEY) {"TCAUDIAG", 0, GenericClass} "" $(!REG_KEY_WRITE) "" TCAUDIAGKEY
 endif
 
 OpenRegKey $(TCAUDIAGKEY) "" "TCAUM90X" $(!REG_KEY_WRITE) TCAUM90XKEY
 ifstr $(TCAUM90XKEY) == ""
	CreateRegKey $(TCAUDIAGKEY) {"TCAUM90X", 0, GenericClass} "" $(!REG_KEY_WRITE) "" TCAUM90XKEY
 endif
 
 SetRegValue $(TCAUM90XKEY) {"DriverNames", 0, $(!REG_VT_SZ), "3C90X.COM;EL90X.DOS;SYSTEM\EL90XND3.SYS;SYSTEM\EL90XND4.SYS;SYSTEM\EL90XBC4.SYS"}
 OpenRegKey $(TCAUM90XKEY) "" "Extensions" $(!REG_KEY_WRITE) ExtensionsKEY
 ifstr $(ExtensionsKEY) == ""
	CreateRegKey $(TCAUM90XKEY) {"Extensions", 0, GenericClass} "" $(!REG_KEY_WRITE) "" ExtensionsKEY
 endif
 
 OpenRegKey $(ExtensionsKEY) "" "DA" $(!REG_KEY_WRITE) DAKEY
 ifstr $(DAKEY) == ""
	CreateRegKey $(ExtensionsKEY) {"DA", 0, GenericClass} "" $(!REG_KEY_WRITE) "" DAKEY
 endif
 
 CloseRegKey $(SOFTKEY)
 CloseRegKey $(COMKEY)
 CloseRegKey $(TCAUDIAGKEY)
 CloseRegKey $(TCAUM90XKEY)
 CloseRegKey $(ExtensionsKEY)
 CloseRegKey $(DAKEY)
 return
 
 
[InstallOption]
 set CurrLang = $($0)
 set Option = $($1)
 set SrcDir = $($2)
 set AddCopy = $($3)
 set DoCopy = $($4)
 set DoConfig = $($5)
 set LanguageList = ^(LanguagesSupported, 1)
 Ifcontains(i) $($0) NOT-IN $(LanguageList)
	Return STATUS_NOLANGUAGE
 endif

 set-subst LF = "\n"
 read-syms IntstallOptions
 read-syms GeneralConstants
 read-syms FileConstants
 read-syms BoomFileConstants 
 read-syms DialogConstants$(!STF_LANGUAGE)
 ifstr(i) $(!NTN_Origination) == "NCPA"
	set Continue = "OK"
 endif

 read-syms FileConstants$(!STF_LANGUAGE)
 detect date
 set-title $(FunctionTitle)
 set to = Begin
 set from = Begin
 set CommonStatus = STATUS_SUCCESSFUL
 EndWait


Begin = +
 ;*********** add this to check correct platform supported********
   ifstr(i) $(!STF_PLATFORM) == "Alpha"      
      set CommonStatus = STATUS_USERCANCEL
      goto end
   else-ifstr(i) $(!STF_PLATFORM) == "Alpha_AXP"
      set CommonStatus = STATUS_USERCANCEL
      goto end
   endif
 ;*****************************************************************

 set CurrentVersionValue = ""
 OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
 Ifstr(i) $(KeyNt) != ""
	 GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
	 Debug-Output "$(InfFile) : WinNT CurrentVersion ="$(CurrentVersionValue)
	 CloseRegKey $(KeyNt)
 Endif
 
 ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
	set NDIS_VER = NDIS4     
 else
	set NDIS_VER = NDIS3
 endif

 read-syms BCDriverConstants$(NDIS_VER)
 read-syms NDDriverConstants$(NDIS_VER)
 ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant) 
	 Debug-Output "$(InfFile) : Configureadapter"
	 set Error = "Windows NT v3.10 is not support by this product"
	 goto fatal
 endif
  
 Ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter

 else-Ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware

 else-Ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter

 else-Ifstr(i) $(!NTN_InstallMode) == configure   
	ifstr $(!STF_PLATFORM) == $(INF_PROCESSER)
		
		ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant)
			OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG\TCAUM90X" $(!REG_KEY_READ) TCAUDIAGKEY
 			ifstr $(TCAUDIAGKEY) != ""	     
				detect checkFileExist
				set Diag = *($(DiagFound), 1)
				ifstr(i) $(Diag) == "tcaudiag.exe"
					; UN-Block the spawning of TD-Diags upon the "Properties" event in the NCP
					StartDetachedProcess ExitCode "Windows Directory" "" $(DiagExe).EXE
				else	

					StartDetachedProcess ExitCode "Windows Directory" "" $(NICPROP).EXE $(!NTN_RegBase)

				endif


			CloseRegKey $(TCAUDIAGKEY)	

			else	

				StartDetachedProcess ExitCode "Windows Directory" "" $(NICPROP).EXE $(!NTN_RegBase)

			endif

		set CommonStatus = STATUS_USERCANCEL
		goto end

		else
			set StartLabel = configureadapter
		endif
   
	else-Ifstr(i) $(ProdKeyName) == $(!NTN_RegBase)
		Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
		ifint $($ShellCode) != $(!SHELL_CODE_OK)           
			goto ShellCodeError
		endif

		set Error = $($R0)
		set from = end
		set to = end
		goto nonfatalinfo

	else-Ifstr(i) $(NDProdKeyName) == $(!NTN_RegBase)
		Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
		ifint $($ShellCode) != $(!SHELL_CODE_OK)           
			goto ShellCodeError
		endif      

		set Error = $($R0)
		set from = end
		set to = end
		goto nonfatalinfo

	else
		set StartLabel = configureadapter
	endif

 else
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
 endif


 Debug-Output "$(InfFile) : =================================================="
 Debug-Output "$(InfFile) : STF_CWDIR is: "$(!STF_CWDIR)
 Debug-Output "$(InfFile) : STF_SRCDIR is: "$(!STF_SRCDIR)
 Debug-Output "$(InfFile) : STF_LANGUAGE is: "$(!STF_LANGUAGE)
 Debug-Output "$(InfFile) : Option is: "$(Option)
 Debug-Output "$(InfFile) : !STF_NCN_InstallMode is:"$(!NTN_InstallMode)
 Debug-Output "$(InfFile) : !STF_NCDETECT is: "$(!STF_NCDETECT)
 Debug-Output "$(InfFile) : !STF_NCOPTION is: "$(!STF_NCOPTION)
 Debug-Output "$(InfFile) : !STF_NCDETCARD is: "$(!STF_NCDETCARD)
 Debug-Output "$(InfFile) : !STF_NCDETINFO is: "$(!STF_NCDETINFO)
 Debug-Output "$(InfFile) : !STF_GUI_UNATTENDED is: "$(!STF_GUI_UNATTENDED)
 Debug-Output "$(InfFile) : !STF_BusType is $(!STF_BUSTYPE)" 
 Debug-Output "$(InfFile) : !STF_BusTypeList is $(!STF_BUSTYPELIST)" 
 Debug-Output "$(InfFile) : =================================================="

 set from = $(fatal)
 set to = $(fatal)
 goto $(StartLabel)


installadapter = +
 Debug-Output "$(InfFile) : Installadapter" 
 OpenRegKey $(!REG_H_LOCAL) "" $(ProdKeyName) $(!REG_KEY_READ) KeyProduct
 Ifstr $(KeyProduct) != $(KeyNull)
	CloseRegKey $(KeyProduct)
	ifstr(i) !(NTN_RegBase) == $(ProdKeyName)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Debug-Output "ShellCode error: cannot get an error string."
			goto ShellCodeError
		endif
		goto end
	else
   	   ;********* add this because of 2 service names *******************************
	   OpenRegKey $(!REG_H_LOCAL) "" $(NDProdKeyName) $(!REG_KEY_READ) KeyProduct
	   Ifstr $(KeyProduct) != $(KeyNull)
			CloseRegKey $(KeyProduct)
			ifstr(i) !(NTN_RegBase) == $(NDProdKeyName)
				ifint $($ShellCode) != $(!SHELL_CODE_OK)
					Debug-Output "ShellCode error: cannot get an error string."
					goto ShellCodeError
				endif
				goto end
			else
				set OldVersionExisted = $(TRUE)
			endif
	   Endif
	   ;*****************************************************************************
	   ;;;set OldVersionExisted = $(TRUE)
	endif
 Endif
 Goto adapteroptions 


configureadapter = +
 Debug-Output "$(InfFile) : Configureadapter"
 set Error = "Cannot configure the software component"
 goto fatal


adapteroptions = +
 Debug-Output "$(InfFile) : Adapteroptions"
 set from = adapteroptions
 ifstr(i) $(!NTN_InstallMode) == configure
	goto updateparameters
 endif


installproduct =+
 install "Install-OTHER"
 Debug-Output "$(InfFile) : installproduct"
 StartWait 
 set AdapterList = $($R1)

 Debug-Output "$(InfFile) : About to look for 3Com PCI Cards"
 set TargetVersion = *($(CurrentVersionValue),4)
 
 Debug-Output "$(InfFile) : Current Version:"$(TargetVersion)
 ifstr $(TargetVersion) == $(NT350VersionConstant) 
	Debug-Output "Running on WindowsNT 3.50"
	set Version350 = $(TRUE)
 else
	 Debug-Output "Running on WindowsNT 3.51 or higher"
	 set Version350 = $(FALSE)
 endif

 ifint $(Version350) == $(TRUE)
 Debug-Output "Running on WindowsNT v3.50, Not using PCI Detection!!!"

	ifstr $(!STF_GUI_UNATTENDED) == "YES"
		Debug-Output "$(InfFile) : Running in GUI unattended mode"
		ifstr(i) $(!AutoNetInterfaceType) != ""
			set BusInterfaceType = $(!AutoNetInterfaceType)
		else
			set BusInterfaceType = 5
		endif

		ifstr(i) $(!AutoNetBusNumber) != ""
			set BusNumber = $(!AutoNetBusNumber)
		else
			set BusNumber = 0
		endif

	set NTDetected = $(FALSE)
	set AdapterList = {{$(Option),0, XXXXX}} 
	Debug-Output "$(InfFile) : BusInterfaceType = $(BusInterfaceType)"
	Debug-Output "$(InfFile) : BusNumber = $(BusNumber)"
	
	else     ;;; GUI_UNATTENDED=NO
		Debug-Output "$(InfFile) : Running 3.50 Bus Dialog"
		set BusInterfaceType = 5
		set BusNumber = 0
		set NTDetected = $(FALSE)
		Shell $(UtilityInf),GetBusTypeDialog,$(ProdHWXXXXXDesc) $(BusInterfaceType) $(BusNumber)
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			 Debug-Output "ShellCode error."
			 goto ShellCodeError
		endif

		set BusInterfaceType = $($R1)
		set BusNumber = $($R2)
		set AdapterList = {{$(Option),0, XXXXX}} 
		Debug-Output "$(InfFile) : BusInterfaceType = $(BusInterfaceType)"
		Debug-Output "$(InfFile) : BusNumber = $(BusNumber)"
	endif    ;;; end check GUI_UNATTENDED


 else      ;;; Version350=FALSE
	 Debug-Output "$(InfFile) : Running 3.51 or higher using PCI Dectection"
	 set NTDetected = $(TRUE)
	 set Vendor = 4279 
	 set CFIDList = $(CFIDList)
	 Debug-Output "$(InfFile) : VendorID = $(Vendor)"
	 Debug-Output "$(InfFile) : CFIDList = $(CFIDList)"
	 set AdapterList = {}

	 ForListDo $(CFIDList)
		 set-div CFID = $($) 1
		 set DeviceID = $($)
		 Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID)
		 ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		 endif

		 ForListDo $($R0)
			set AdapterList = >($(AdapterList), {*($($),1), *($($),2), $(DeviceID)})
		 EndForListDo

	 EndForListDo

	 ifstr(i) $(AdapterList) == {}                 
		 set Error = $(CANNOT_FIND_ANY_CARD)
		 set CommonStatus = USER_CANCEL
		 set from = end
		 goto nonfatal
	 endif
 endif 

 set ToInstallList = {}
 Debug-Output "$(InfFile) : Adapterlist = $(AdatperList)"
 

 ForListDo $(AdapterList)
	ifint $(NTDetected) == $(TRUE)
		 set DetectedBusNum = *($($),1)
		 set DetectedSlotNum = *($($),2)
		 set DeviceID = *($($),3)
		 Debug-Output "$(InfFile) : DetectedBusNumber = $(DetectedBusNum)"
		 Debug-Output "$(InfFile) : DetectedSlotNum = $(DetectedSlotNum)"

		;**************** add this because of 2 Service names**************
		set BoomCard = FALSE     
		ifstr(i) $(DeviceID) == "36944"
			set BoomCard = TRUE
		else-ifstr(i) $(DeviceID) == "36945"
			set BoomCard = TRUE
		else-ifstr(i) $(DeviceID) == "36864"
			set BoomCard = TRUE
		else-ifstr(i) $(DeviceID) == "36865"
			set BoomCard = TRUE
		endif

		ifstr(i) $(BoomCard) == TRUE
			Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
			$(DetectedSlotNum), $(ProdHW$(DeviceID)Desc), "El90xnd"

			ifstr(i) $($R1) != "YES" 
				goto AddToNotList
			else
				goto endchecking
			endif

		;we don't have to check old names for Boomerang because we don't allow update on Boomerang
		;Update only allowed if Boom card has used new service name El90xnd.
		;Ed5.0 and anything before that didn't use service name El90xnd.

		else ; 90xBC CARD
    		Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
			$(DetectedSlotNum), $(ProdHW$(DeviceID)Desc), "El90x"

			;**** DO THIS BECAUSE WE NOW USE NEW NAMES FOR OUR CARDS, CHECK OLD NAME
			ifstr(i) $($R1) != "YES"         ;not installed yet, not sure, check oldnames
				Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
				$(DetectedSlotNum), $(OLDProdHW$(DeviceID)Desc), "El90x"

				ifstr(i) $($R1) != "YES"     ;not installed yet, still not sure because we changed desc twice before
					Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
					$(DetectedSlotNum), $(ED50HW$(DeviceID)Desc), "El90x"

					ifstr(i) $($R1) != "YES" ;not installed yet, sure by now
						goto AddToNotList
					else                     ;already installed with old name on ED5.0
						goto endchecking
					endif  
					          
				else                         ;already installed with old name on ED4.0 or before that
					goto endchecking
				endif
			else			     ;already installed with current name on ECD5.1
				goto endchecking                       
			endif
		endif 


AddToNotList=+
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif

	ifstr $($R0) != "NO_ERROR"
		set Error = $($R0)
		goto fatal
	endif

	;ifstr(i) $(ToInstallList) == {}     ; COMMENT THIS OUT TO INSTALL MULTIPLE NIC at a time
		ifstr(i) $($R1) != "YES"
			set ToInstallList = >($(ToInstallList), $($))
		endif 
	;endif


endchecking =+
	endif 
 EndForListDo

 
 ifstr(i) $(ToInstallList) == {}
	 set Error = $(CANNOT_FIND_ANY_UNINSTALLED_CARD)
	 set CommonStatus = USER_CANCEL
	 set from = end
	 goto nonfatal
 endif

 ForListDo $(ToInstallList)
	set DetectedBusNum = *($($),1)
	set DetectedSlotNum = *($($),2)
	set DeviceID = *($($),3)
	set BoomDetected = FALSE
	set NonBoomDetected = FALSE

	;********************************************************************
	; Check if 90XBC or Boomerang
	;********************************************************************
	set BoomCard = FALSE 
    
	ifstr(i) $(DeviceID) == "36944"
		set BoomCard = TRUE
	else-ifstr(i) $(DeviceID) == "36945"
		set BoomCard = TRUE
	else-ifstr(i) $(DeviceID) == "36864"
		set BoomCard = TRUE
	else-ifstr(i) $(DeviceID) == "36865"
		set BoomCard = TRUE
	endif  

	ifstr(i) $(BoomCard) == TRUE 
	set CorrectProdHWName = $(NDProdHWName)
	set CorrectProdSWName = $(NDProdSWName)
	set CorrectNetRuleSWType = $(NDNetRuleSWType)
	set CorrectNetRuleSWBindForm = $(NDNetRuleSWBindForm)
	set CorrectNetRuleSWClass = $(NDNetRuleSWClass)
	set CorrectNetRuleSWBindable = $(NDNetRuleSWBindable)
	set CorrectNetRuleHWBindForm = $(NDNetRuleHWBindForm)
	set CorrectNetRuleHWType = $(NDNetRuleHWType)
	set CorrectNetRuleHWClass = $(NDNetRuleHWClass)
	set CorrectProdKeyName = $(NDProdKeyName)
	set CorrectParamKeyName = $(NDParamKeyName)
	set CorrectProdSWDesc = $(NDProdSWDesc)
	set CorrectProdSWTitle = $(NDProdSWTitle)

		ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
			set CorrectNetEventDLL = $(ND4NDNetEventDLL)
			set CorrectProdSWImagePath = $(ND4NDProdSWImagePath)
			set CorrectProdSWUpgradePath = $(ND4NDProdSWUpgradePath)
		else
			set CorrectNetEventDLL = $(ND3NDNetEventDLL)
			set CorrectProdSWImagePath = $(ND3NDProdSWImagePath)
			set CorrectProdSWUpgradePath = $(ND3NDProdSWUpgradePath)
		endif

	else ; 90XBC CARD
	set CorrectProdSWDesc = $(ProdSWDesc)
	set CorrectProdSWTitle = $(ProdSWTitle)
	set CorrectProdHWName = $(ProdHWName)
	set CorrectProdSWName = $(ProdSWName)
	set CorrectNetRuleSWType = $(NetRuleSWType)
	set CorrectNetRuleSWBindForm = $(NetRuleSWBindForm)
	set CorrectNetRuleSWClass = $(NetRuleSWClass)
	set CorrectNetRuleSWBindable = $(NetRuleSWBindable)
	set CorrectNetRuleHWBindForm = $(NetRuleHWBindForm)
	set CorrectNetRuleHWType = $(NetRuleHWType)
	set CorrectNetRuleHWClass = $(NetRuleHWClass)
	set CorrectProdKeyName = $(ProdKeyName)
	set CorrectParamKeyName = $(ParamKeyName)

		ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
			set CorrectNetEventDLL = $(ND4BCNetEventDLL)
			set CorrectProdSWImagePath = $(ND4BCProdSWImagePath)
			set CorrectProdSWUpgradePath = $(ND4BCProdSWUpgradePath)
		else
			set CorrectNetEventDLL = $(ND3BCNetEventDLL)
			set CorrectProdSWImagePath = $(ND3BCProdSWImagePath)
			set CorrectProdSWUpgradePath = $(ND3BCProdSWUpgradePath)
		endif

	endif ; END CHECK CARD



	;DEBUG:
	;	ifstr(i) $(BoomCard) == TRUE 
	;	 Set DlgText = "bOOM CARD"
	;        else
	;         Set DlgText = "90xbc CARD"
	;	endif
	;	Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
	;	Set DlgText = "firstDB "$(CorrectProdHWName)" "$(CorrectProdSWName)
	;	Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
	;	Set DlgText = $(CorrectProdKeyName)" "$(CorrectProdSWImagePath)
	;	Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
	;	Set DlgText = "Netevent "$(CorrectNetEventDLL)
	;	Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText)
	;END DEBUG

	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(CorrectProdHWName) $(!REG_KEY_READ) KeyNt
	CloseRegKey $(KeyNt)

	Ifstr(i) $(KeyNt) == "" ; Begin check Key=null

		Debug-Output "$(InfFile) : AddSoftwareComponent"
		Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
		$(CorrectProdSWName), +
		$(CorrectProdSWName), +
		$(CorrectProdSWTitle), $(STF_CONTEXTINFNAME), +
		$(CorrectProdSWImagePath), "kernel", "NDIS", {}, "",+
		$(CorrectNetEventDLL)	
 		Set OEM_ABANDON_SOFTWARE = TRUE

		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif

		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
			EndWait
			CloseRegKey $($R1)
			CloseRegKey $($R2)
			CloseRegKey $($R3)
			CloseRegKey $($R4)
			CloseRegKey $($R5)
			goto fatalregistry
		endif

		;DEBUG:
		;	ifstr(i) $(BoomCard) == TRUE 
		;	 Set DlgText = "bOOM CARD"
		;        else
		;         Set DlgText = "90xbc CARD"
		;	endif
		;	Shell "Done Add Software comp to get keyhandle"
		;	Set DlgText = "firstDB "$(CorrectProdHWName)" "$(CorrectProdSWName)	
		;END DEBUG	

		Set SoftProductKey = $($R1)
		Set SoftNetRuleKey = $($R2)
		Set SoftServiceKey = $($R3)
		Set SoftParameterKey = $($R4)
		Set SoftLinkageKey = $($R5)
		set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SWType)},+
		
		{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProdMajorVer)},+
		{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProdMinorVer)},+
		{Title,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWTitle)},+
		{Description,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWDesc)},+
		{Review,$(NoTitle),$(!REG_VT_DWORD),$(ProdReview)},+
		{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWName)},+
		{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
		{EDVersion,$(NoTitle),$(!REG_VT_SZ),$(EtherDiskVersion)}}
		Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
		
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif

		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
			EndWait
			CloseRegKey $(SoftProductKey)
			CloseRegKey $(SoftNetRuleKey)
			CloseRegKey $(SoftServiceKey)
			CloseRegKey $(SoftParameterKey)
			CloseRegKey $(SoftLinkageKey)
			goto fatalregistry
		endif

		set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(CorrectNetRuleSWType)},+
		
		{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSWUse)}, +
		{bindform,$(NoTitle),$(!REG_VT_SZ),$(CorrectNetRuleSWBindForm)}, +
		{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(CorrectNetRuleSWClass)}, +
		{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(CorrectNetRuleSWBindable)}, +
		{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
		Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
		
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif

		set RegistryErrorIndex = $($R0)
		Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
			EndWait
			CloseRegKey $(SoftProductKey)
			CloseRegKey $(SoftNetRuleKey)
			CloseRegKey $(SoftServiceKey)
			CloseRegKey $(SoftParameterKey)
			CloseRegKey $(SoftLinkageKey)
			goto fatalregistry
		endif

		;********** Add parameter for driver *************************

		set WakeOnLan = YES
		set WakeOnLink = NO 
		set ValueEnable = ENABLE 

		ifstr(i) $(BoomCard) == TRUE
			Set NewValueList = {{WakeOnMagic,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLan)},+
			{WakeOnLink,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLink)},+
			{FLOWCONTROL,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}}

		else
			Set NewValueList = {{RWUMAGIC,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)},+
			{FLOWCONTROL,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}}
		endif

		Shell $(UtilityInf), AddValueList, $(SoftParameterKey), $(NewValueList)
		CreateRegKey $(SoftParameterKey) {"3CDefault" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) +
		 "" KeyNt2 

		;;;
		Set ThisValueList = {RWUMAGIC,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}


		OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(NDProdSWName) $(!REG_KEY_ALL_ACCESS) NDKeyNt 
		ifstr $(KeyNt2) != ""	
			SetRegValue $(KeyNt2 ) $("ThisValueList") 
			CloseRegKey $(KeyNt2 )
		endif
		;;;

		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif

		CloseRegKey $(SoftProductKey)
		CloseRegKey $(SoftNetRuleKey)
		CloseRegKey $(SoftServiceKey)
		CloseRegKey $(SoftParameterKey)
		CloseRegKey $(SoftLinkageKey)

		Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
			EndWait
			goto fatalregistry
		endif
	
	;*************************************************************
	
	endif ; end check Key=null

	Debug-Output "$(InfFile) : DetectedBusNumber = $(DetectedBusNum)"
	Debug-Output "$(InfFile) : DetectedSlotNum = $(DetectedSlotNum)"
	Debug-Output "$(InfFile) : Installing Card at $(DetectedBusNum):$(DetectedSlotNum)!"

	Shell $(UtilityInf), AddHardwareComponent, $(CorrectProdHWName),$(STF_CONTEXTINFNAME),$(CorrectProdKeyName)
	ifint $($R4) != -1
		Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
	endif

	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif

	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
		EndWait
		CloseRegKey $($R1)
		CloseRegKey $($R2)
		CloseRegKey $($R3)
		goto fatalregistry
	endif

	Set HardNetCardKey = $($R1)
	Set HardNetRuleKey = $($R2)
	Set HardParameterKey = $($R3)
	set AdapterNumber = $($R4)
	set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
	{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProdHW$(DeviceID)Title)},+
	{Description,$(NoTitle),$(!REG_VT_SZ),$(ProdHW$(DeviceID)Desc)},+
	{ProductName,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdHWName)},+
	{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
	{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
	{EDVersion,$(NoTitle),$(!REG_VT_SZ),$(EtherDiskVersion)},+
	}

	; Workaround: Sometimes AddHardwareComponent can't return correct handle for HardNetCardKey
	; We have to manually open the key using adapter number returned from AddHardwareComponent	
	; might have to do the same for HardParameterKey

		OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardsKey)$($R4) $(!REG_KEY_SET_VALUE) HardNetCardKey

	; end workaround

	Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif

	;set RegistryErrorIndex = $($R0)
	;Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
	;EndWait
	;goto fatalregistry
	;endif

	set BusTypeNum = 5 
	ifstr(i) $(DeviceID) == "36944"
		set CardType = 0
	else-ifstr(i) $(DeviceID) == "36945"
		set CardType = 0
	else-ifstr(i) $(DeviceID) == "36949"
		set CardType = 0
	else
		set CardType = 2
	endif 

	ifint $(NTDetected) == $(TRUE)
		set BusNumber = $(DetectedBusNum)
		set SlotNum = $(DetectedSlotNum) 
		set BusInterfaceType = $(BusTypeNum)
		Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
		Set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
		{Slot,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}}
		Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
		Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)

		ifint $($ShellCode) != $(!SHELL_CODE_OK)
		  goto ShellCodeError
		endif

		Set NewValueList = {{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)},+
		{Media,$(NoTitle),$(!REG_VT_SZ),$(Hardware_Default)}}

		Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
		Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)

		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif

	else  ; NTDetected != TRUE

		Set NewValueList = {+
		{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
		{Media,$(NoTitle),$(!REG_VT_SZ),$(Hardware_Default)}}

		Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
		Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)

		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif

	endif ;


	Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
	{CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+
	{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
	}

	Debug-Output "$(InfFile) : Set HardwareParameterKey = $(NewValueList)"
	Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)

	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif

	ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
		Shell $(UtilityInf), AddDefaultNetcardParameters, $(HardParameterKey)
	endif

	set TempProdName = """"$(CorrectProdHWName)$(AdapterNumber)""""
	set TempBindForm = $(TempProdName)$(CorrectNetRuleHWBindForm)
	set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(CorrectNetRuleHWType)},+
	{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
	{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(CorrectNetRuleHWClass)}, +
	{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
 
	Debug-Output "$(InfFile) : HardwareRuleKey = $(NewValueList)"
	Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)

	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeEror
	endif

;******************************************************************************************************************
;3CDefault
		set ValueEnable = ENABLE 

		ifstr(i) $(BoomCard) == TRUE
			Set ThisValueList = {{WakeOnMagic,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLan)},+
					     {WakeOnLink,$(NoTitle),$(!REG_VT_SZ),$(WakeOnLink)},+
			                     {FLOWCONTROL,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}}
		else
			Set ThisValueList = {{RWUMAGIC,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)},+
			                     {FLOWCONTROL,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}}
		endif

		Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(ThisValueList)
		
		; Create 3CDefault key iff it's a non BOOM card since BOOM cards don't support Wake on Magic Packet
 		ifstr(i) $(BoomCard) == FALSE 
			CreateRegKey $(HardParameterKey) {"3CDefault" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) +
		 	"" KeyNt2 

			Set ThisValueList = {RWUMAGIC,$(NoTitle),$(!REG_VT_SZ),$(ValueEnable)}
			SetRegValue $(KeyNt2) $("ThisValueList") 
		endif

;******************************************************************************************************************

	CloseRegKey $(HardNetCardKey)
	CloseRegKey $(HardNetRuleKey)
	CloseRegKey $(HardParameterKey)

 	ifstr(i) $(BoomCard) == FALSE  
     		set NonBoomDetected = TRUE
     		goto endsequence 
	endif 		
 		
	ifstr(i) $(BoomCard) == TRUE
		set BoomDetected = TRUE
    endif
	
endsequence =+



				;*******************************************
				;* Driver History Information              *
				;* The following code adds Driver History  *
				;* Information to the system registry      *
				;*******************************************

				; Driver Information Entries
				; These items will be set by IHV...
				Set DriverMfgr = "3Com Corporation"                      ; IHV name
				Set DriverVersionID = "5.2.0.0"                     ; The IHV driver package version
				Set BaseDriverFileName = "EL90XBC4.SYS"          ; Key file for version check
				Set BaseDriverFileVersion = "5.2.0.0"               ; Version in Key file
				; These items will be set to VENDOR values, and then set to OEM-specific by OEM
				Set DriverOEM = "3Com Corporation"                       ; name of the OEM
				Set DriverFamily = "NIC"                         ; device family (NIC, Storage, Video...)
				Set DriverProduct = "???"                   ; Specific Name of device (chipset, for example)
				Set DriverDescription = " Description - DriverInfo sample"   ; Description of device (product name, OS or system supported)
				Set DriverOEMVersion = "5.2.0.0"                     ; OEM-specified version

				; This section is added to all INFs to add registry entries for Driver Info.

				set DriverInfoRegList = {"InstalledOptions",$(DriverOEM),$(DriverFamily),$(DriverMfgr),$(DriverProduct)}
				set DriverInfoKey = "SOFTWARE"
				OpenRegKey $(!REG_H_LOCAL) "" $(DriverInfoKey) $(!REG_KEY_CREATE_SUB_KEY) DriverInfoOldKeyHandle
				ifstr $(DriverInfoOldKeyHandle) == ""
				   shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "DriverInfo registry failed. Could not open HKLM\Software ("$(RegLastError)")"
				   set DriverInfoFailed = "FAIL"
				else
				   ForListDo $(DriverInfoRegList)
					  Set NewDriverInfoKey = $(DriverInfoKey)"\"$($)
					  OpenRegKey $(!REG_H_LOCAL) "" $(NewDriverInfoKey) $(!REG_KEY_ALL_ACCESS) DriverInfoKeyHandle
					  ifstr(i) $(DriverInfoKeyHandle) == ""
						 CreateRegKey $(DriverInfoOldKeyHandle) {$($),0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" DriverInfoKeyHandle
						 ifstr $(DriverInfoKeyHandle) == ""
							shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" "DriverInfo registry failed. Could not create key:"$($)" ("$(RegLastError)")"
							set DriverInfoFailed = "FAIL"
						 endif
					  endif
					  CloseRegKey $(DriverInfoOldKeyHandle)
					  set DriverInfoOldKeyHandle = $(DriverInfoKeyHandle)
					  set DriverInfoKey = $(NewDriverInfoKey)
				   EndForListDo
				endif

				ifstr $(DriverInfoFailed) != "FAIL"
				   SetRegValue $(DriverInfoKeyHandle) {"Description",0,$(!REG_VT_SZ),$(DriverDescription)}
				   SetRegValue $(DriverInfoKeyHandle) {"CurrentVer",0,$(!REG_VT_SZ),$(DriverOEMVersion)}
				   SetRegValue $(DriverInfoKeyHandle) {"Ver_"$(DriverOEMVersion),0,$(!REG_VT_SZ),$(DriverVersionID)}
				   SetRegValue $(DriverInfoKeyHandle) {" BaseDriverFileName",0,$(!REG_VT_SZ),$( BaseDriverFileName)}
				   SetRegValue $(DriverInfoKeyHandle) {" BaseDriverFileVersion",0,$(!REG_VT_SZ),$(BaseDriverFileVersion)}

				   CloseRegKey $(DriverInfoKeyHandle)
				endif

				;*******************************************
				;* End of Driver History Information       *
				;***********************************************


 ; Paul May - 11/24/99 10:37am
 ;******* CREATE DIAG REGISTRY FOR TOUCHDOWN SINCE WE SUPPORT IT **************
 ; Place an instance in the registry for each instance of the Nic card

 set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)} 

 OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(CorrectProdSWName) $(!REG_KEY_ALL_ACCESS) NDKeyNt 
 ifstr $(NDKeyNt) != ""	
	SetRegValue $(NDKeyNt) $(TrayIconList) 
	CloseRegKey $(NDKeyNt)
 endif


 EndForListDo


set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)} 

 OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG" $(!REG_KEY_ALL_ACCESS) NDKeyNt 
 ifstr $(NDKeyNt) == ""	
	CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\3Com\TCAUDIAG", 0, GenericClass} "" $(!REG_KEY_WRITE) "" NDKeyNt
 endif
	SetRegValue $(NDKeyNt) $(TrayIconList) 
	CloseRegKey $(NDKeyNt)



; Paul May - 12/08/99 6:27pm
    ;;; Add in entries to support the DA/Touchdown integration - REALNICS Key
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG\RealNICs" $(!REG_KEY_ALL_ACCESS) RealNICsKey

    Ifstr(i) $(RealNICsKey) == "" ; key doesn't exist so create it
	CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\3Com\TCAUDIAG\RealNICs", 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" RealNICsKey
    endif

   
      Ifstr(i) $(RealNICsKey) != "" ; key exists

        OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services" $(!REG_KEY_ALL_ACCESS) ServicesKey
        Ifstr(i) $(ServicesKey) != "" ; key exists
          EnumRegKey $(ServicesKey) DriverList
          ForListDo $(DriverList)
            ;;; Check whether any python driver instances are present still
            ;;; If not, remove Touchdown and delete some leftover files
            set foundPythonInstance = FALSE
            set Driver = *($($), 1)
            Split-String "$(Driver)" "N" DriverTokens
            set DriverName = *($(DriverTokens), 1)
            ifstr(i) $(Driver) != "El980n4"
              ifstr(i) $(DriverName) == "El980"
                ;;; We have found a Python-related key
                set foundPythonInstance = TRUE
              endif
            endif

            ifstr(i) $(Driver) != "El98xn4"
              ifstr(i) $(DriverName) == "El98x"
                ;;; We have found a Python-related key
                set foundPythonInstance = TRUE
              endif
            endif

            Ifstr(i) $(foundPythonInstance) == "TRUE"
              ;; Add this driver instance name to the list of realNICs
              SetRegValue $(RealNICsKey) {$(Driver), 0, $(!REG_VT_SZ), ""}
            endif

            set found3ComClientInstance = FALSE
            Split-String "$(Driver)" "x" DriverTokens
            set DriverName = *($(DriverTokens), 1)
            ifstr(i) $(Driver) != "El90x"
              ifstr(i) $(DriverName) == "El90"
                ;;; We have found a 3Com client-related key
                set found3ComClientInstance = TRUE
              endif
            endif

            Split-String "$(Driver)" "d" DriverTokens
            set DriverName = *($(DriverTokens), 1)
            ifstr(i) $(Driver) != "El90xnd"
              ifstr(i) $(DriverName) == "El90xn"
                ;;; We have found a 3Com client-related key
                set found3ComClientInstance = TRUE
              endif
            endif

            Split-String "$(Driver)" "x" DriverTokens
            set DriverName = *($(DriverTokens), 1)
            ifstr(i) $(Driver) != "EL99X"
              ifstr(i) $(DriverName) == "El99"
                ;;; We have found a 3Com client-related key
                set found3ComClientInstance = TRUE
              endif
            endif

            Ifstr(i) $(found3ComClientInstance) == "TRUE"
              ;; Add this driver instance name to the list of realNICs
              SetRegValue $(RealNICsKey) {$(Driver), 0, $(!REG_VT_SZ), ""}
            endif

          EndForListDo

          CloseRegKey $(ServicesKey)
        Endif
      Endif


    CloseRegKey $(DiagKey)
    CloseRegKey $(RealNICsKey)
 
;End - Add in entries to support the DA/Touchdown integration - REALNICS Key


 ;;ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
 
 OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(CorrectProdHWName) $(!REG_KEY_ALL_ACCESS) KeyService
 Ifstr $(KeyService) != "" 
	SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWUpgradePath)}
 else 
	goto fatalregistry 
 endif 

 CloseRegKey $(KeyService)
 OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(CorrectProdHWName) $(!REG_KEY_ALL_ACCESS) KeyEventLog
 Ifstr $(KeyEventLog) != "" 
	 SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(CorrectNetEventDLL)} 
 else 
	goto fatalregistry 
 endif 

 CloseRegKey $(KeyEventLog)
 ;;endif


 ifint $(OldVersionExisted) == $(FALSE)
	Ifstr(i) $(DoCopy) == "YES"
		Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Goto ShellCodeError
		endif

	Else-Ifstr(i) $($R0) == STATUS_FAILED
		Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif

		set Error = $($R0)
		Goto fatal

	Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
		Goto successful
	Endif 
 Endif


 ;******* CREATE DIAG REGISTRY FOR TOUCHDOWN SINCE WE SUPPORT IT **************

 set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)} 

 OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG" $(!REG_KEY_ALL_ACCESS) NDKeyNt 
 ifstr $(NDKeyNt) != ""	
	SetRegValue $(NDKeyNt) $(TrayIconList) 
	CloseRegKey $(NDKeyNt)
 endif

;******************************************************************************************
NextCommon =+
;******************************************************************************************



 ; *** All responsibilityies related to the Diags are governed by the Master Navigator.  Section below
 ; becomes redundant

 ;install "Install-Uninstaller" 

 ;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\"$(ProductSoftwareName) $(!REG_KEY_ALL_ACCESS) + 
 ;KeyNt

 ;set TrayIconList = {TCAUDIAG,$(NoTitle),$(!REG_VT_SZ),$(DIAGCARDTYPE)} 
 ;SetRegValue $(KeyNt) $(TrayIconList) 
 ;CloseRegKey $(KeyNt) 

; ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
;	
;	ifstr $(Install_3NIC_Diag) == "YES"
;		RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-upgrade" 
;		OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall" + 
;		$(!REG_KEY_ALL_ACCESS) KeyNt 
;		
;		ifstr $(KeyNt) == "" 
;			CreateRegKey $(!REG_H_LOCAL) {"SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall", + 
;			0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" KeyNt 
;		endif 
;
;		OpenRegKey $(KeyNt) "" "3ComNicUnInstall" $(!REG_KEY_ALL_ACCESS) KeyNt2 
;		
;		ifstr $(KeyNt2) == "" 
;			CreateRegKey $(KeyNt) {"3ComNicUnInstall" , 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) +
;			 "" KeyNt2 
;		endif 
;
;		set NewValueList = {{DisplayName, $(NoTitle), $(!REG_VT_SZ), "3Com NIC Diagnostics"}, + 
;		{UninstallString, $(NoTitle), $(!REG_VT_SZ), $(UnInstallerEXE).EXE}} 
;
;		Shell $(UtilityInf), AddValueList, $(KeyNt2), $(NewValueList) 
;
;		ifint $($ShellCode) != $(!SHELL_CODE_OK) 
;			goto ShellCodeError 
;		endif 
;
;		CloseRegKey $(KeyNt) 
;		CloseRegKey $(KeyNt2) 
;
;	endif 
; endif 


 ;ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
	;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" + 	 
	;$(!REG_KEY_ALL_ACCESS) KeyNt 	 
	 
	;set TrayIconList = {TCASUTIEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"}
	;DeleteRegValue $(KeyNt) "COMSMDEXE" 			 
	;SetRegValue $(KeyNt) $(TrayIconList) 	 
	;CloseRegKey $(KeyNt) 	 
	  	 
	;ifstr $(Install_3NIC_Diag) == "YES" 
		;Debug-Output "$(InfFile) : (Install_3NIC_Diag) == "YES"" 
		; Shell "", DiagRegistry 
	 
		; ***
	 	;install "Install-3nicdiag" 

		;ifstr $(Install_Installer) == "YES" 
		;	ifstr(i) $(!STF_GUI_UNATTENDED) != "YES" 
		;		ForListDo $(ToInstallList) 
		;			set BusNum = *($($),1) 
		;			set SlotNum = *($($),2) 
		;			RunProgram ExitCode "Windows Directory" "" $(InstallerExe).EXE + 
		;			"cardtype=TCAUM90X" "bus="$(BusNum) "slot="$(SlotNum) 
		;		EndForListDo 
		;	endif 
		;endif 
	 	 
		;set SRCDIR_OVERRIDE_Save = $(!STF_SRCDIR_OVERRIDE) 
		;set !STF_SRCDIR_OVERRIDE = $(SrcDir) 
			 ;Shell $(!STF_WINDOWSSYSPATH)\TCAITDI.INF, InstallOption, $(CurrLang),+ 
			 ;"TCAITDI" ,$(SrcDir), YES, YES, YES, NO 
		;set !STF_SRCDIR_OVERRIDE = $(SRCDIR_OVERRIDE_Save) 
	 
		;ifstr(i) $(Install_Shortcuts) == "YES" 
			;Debug-Output "$(InfFile) : (Install_Shortcuts) == "YES"" 
					; *** Responsilibity of the MasterNavigator ***
					;RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-setup" 

			;Debug-Output "$(InfFile) : Enabling Tray Icon" 
			;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" +
			; $(!REG_KEY_ALL_ACCESS) KeyNt 

			;set TrayIconList = {TCASUTIEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"} 
			;SetRegValue $(KeyNt) $(TrayIconList)
			;DeleteRegValue $(KeyNt) "COMSMDEXE" 
			;CloseRegKey $(KeyNt) 
		;endif 
	 ;endif 
 ;endif 

 ifint $(OldVersionExisted) == $(FALSE)
	Ifstr(i) $(DoCopy) == "YES"
		Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			Goto ShellCodeError

		Else-Ifstr(i) $($R0) == STATUS_FAILED
			Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"

			ifint $($ShellCode) != $(!SHELL_CODE_OK)
				goto ShellCodeError
			endif

			set Error = $($R0)
			Goto fatal
		
		Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
			Goto successful
		Endif
 
	Endif

 ;**************** check if 905BC and copy new NDIS4 driver ********************

	ifstr(i) $(NonBoomDetected) == TRUE
		install "Install-OptionNewNDIS"
	endif

	ifstr(i) $(BoomDetected) == TRUE
		goto oldndis
	endif

oldndis =+
	install "Install-Option" 
	
endcurrent =+
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
		Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
		
		ifint $($ShellCode) != $(!SHELL_CODE_OK)
			goto ShellCodeError
		endif

		set Error = $($R0)
		goto fatal
	endif
 endif


 EndWait
 goto successful

updateparameters =+
 Debug-Output "$(InfFile) : Updateparameters"
 set HardParameterKey = $($R3)
 
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
 endif

 CloseRegKey $(KeyParameters)
 goto successful

bindingadapter =+
 Debug-Output "$(InfFile) : bindingadapter"
 Return STATUS_SUCCESSFUL
 
 set Error = "Binding: Sorry, not yet implemented."
 goto fatal

removeadapter = +

 ;****************************************************************************************
 ; Check if 905BC or Boomerang
 ;****************************************************************************************

 set BoomCard = FALSE
 set CurrentCardPath =  $(!NTN_RegBase)
 set TitleValue = ""
 set CardTitle = ""
 set NameTokenList = ""

 OpenRegKey $(!REG_H_LOCAL) "" $(CurrentCardPath) $(!REG_KEY_READ) CurrentCardKey

 Ifstr(i) $(CurrentCardKey) != ""
	GetRegValue $(CurrentCardKey) "Title" TitleValue
	set CardTitle = *($(TitleValue), 4)
	Split-String $(CardTitle) "()" NameTokenList
	set NameCode = *($(NameTokenList), 3)

	Ifstr(i) $(NameCode) == "3C905-TX"
	   set BoomCard = TRUE 
	Else-Ifstr(i) $(NameCode) == "3C905-T4"
	   set BoomCard = TRUE 
	Else-Ifstr(i) $(NameCode) == "3C900-TPO"
	   set BoomCard = TRUE 
	Else-Ifstr(i) $(NameCode) == "3C900-COMBO"
	   set BoomCard = TRUE 
	endif

	CloseRegKey $(CurrentCardKey)
 Endif                         ;end checking currentCardKey
;****************************************************************************************


 ifstr(i) $(BoomCard) == TRUE 
	set CorrectProdHWName = $(NDProdHWName)
	set CorrectProdSWName = $(NDProdSWName)
	set CorrectProdKeyName = $(NDProdKeyName)
 else
	set CorrectProdHWName = $(ProdHWName)
	set CorrectProdSWName = $(ProdSWName)
	set CorrectProdKeyName = $(ProdKeyName)
 endif

 Debug-Output "$(InfFile) : removeadapter"
 Debug-Output "$(InfFile) : ----> $(CorrectProdKeyName), $(!NTN_RegBase)"
 
 Ifstr(i) $(CorrectProdKeyName) == $(!NTN_RegBase)
	 Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	 $(CorrectProdSWName)

	 ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	 endif

	 set RegistryErrorIndex = $($R0)
	 Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		goto fatalregistry
	 endif
 else
; Paul May - 12/04/99 10:01am
	; Populate Driver Instance
   	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(!REG_KEY_ALL_ACCESS) CardIndexKey
   	Ifstr(i) $(CardIndexKey) != "" ; key exists
     		GetRegValue $(CardIndexKey) "ServiceName" ServiceNameList

     		;;; The name of the service being removed is stored in DriverInstance
     		set DriverInstance = *($(ServiceNameList), 4)
   	endif
   	CloseRegKey $(CardIndexKey)
; End - Populate Driver Instance
	 Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	 $(CorrectProdSWName), $(!NTN_RegBase)
	 ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	 endif

	 set RegistryErrorIndex = $($R0)
	 Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		goto fatalregistry
	 endif
 endif




 ifstr(i) $(!STF_PLATFORM) == $(INF_PROCESSER) 
	; *** Responsilibity of the MasterNavigator ***
        ; RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-inf" 
 endif

; Paul May - 12/04/99 9:35am
 ;;; Remove the Service Name held in DriverInstance from the RealNICs key

 OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG\RealNICs" $(!REG_KEY_ALL_ACCESS) RealNICsKey
 Ifstr(i) $(RealNICsKey) != "" ; key exists
   EnumRegValue $(RealNICsKey) RealNICsList
   set RealNICsValues = {}
   ForListDo $(RealNICsList)
     set RealNICsArray = *($($), 1)
     ForListDo $(RealNICsArray)
       set DriverInstanceName = *($($), 1)
       QueryListSize RealNICsValuesSize $(RealNICsValues)
       ifstr(i) $(RealNICsValuesSize) == 0
         set RealNICsValues = {$(DriverInstanceName)}
       else
         set RealNICsValues = >($(RealNICsValues), $(DriverInstanceName))
       endif
     EndForListDo
   EndForListDo

   set NewRealNICsValues = {}

   ForListDo $(RealNICsValues)
     ifstr(i) *($($), 1) != $(DriverInstance)
       set NewRealNICsValues = >($(NewRealNICsValues), *($($), 1))
     endif
   EndForListDo

   CloseRegKey $(DiagKey)
   OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\3Com\TCAUDIAG" $(!REG_KEY_ALL_ACCESS) DiagKey
   Ifstr(i) $(DiagKey) != "" ; key exists
     DeleteRegTree $(DiagKey) "RealNICs"
     CreateRegKey $(DiagKey) {"RealNICs", 0, GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" NewRealNICsKey
     Ifstr(i) $(NewRealNICsKey) != "" ; key exists
       ForListDo $(NewRealNICsValues)
         SetRegValue $(NewRealNICsKey) {*($($), 1), 0, $(!REG_VT_SZ), ""}
       EndForListDo
     Endif
   Endif
 Endif

 CloseRegKey $(NewRealNICsKey)
 CloseRegKey $(RealNICsKey)
 CloseRegKey $(DiagKey)

; End Remove the Service Name held in DriverInstance from the RealNICs key

 goto end



UpgradeSoftware = +

 ;****************************************************************************************
 ; Check if 90xBC or Boomerang
 ;****************************************************************************************

 set BoomCard = FALSE
 set CurrentCardPath =  $(!NTN_RegBase)
 set TitleValue = ""
 set CardTitle = ""
 set NameTokenList = ""

 OpenRegKey $(!REG_H_LOCAL) "" $(CurrentCardPath) $(!REG_KEY_READ) CurrentCardKey
 Ifstr(i) $(CurrentCardKey) != ""
	GetRegValue $(CurrentCardKey) "Title" TitleValue
	set CardTitle = *($(TitleValue), 4)
	Split-String $(CardTitle) "()" NameTokenList
	set NameCode = *($(NameTokenList), 3)

	Ifstr(i) $(NameCode) == "3C905-TX"
	   set BoomCard = TRUE  
	Else-Ifstr(i) $(NameCode) == "3C905-T4"
	   set BoomCard = TRUE 
	Else-Ifstr(i) $(NameCode) == "3C900-TPO"
	   set BoomCard = TRUE 
	Else-Ifstr(i) $(NameCode) == "3C900-COMBO"
	   set BoomCard = TRUE
	Else-Ifstr(i) $(NameCode) == "3C905"       ; name in oemsetup.inf provided by Microsoft
	   set BoomCard = TRUE  
	endif

	CloseRegKey $(CurrentCardKey)
 Endif                         ;end checking currentCardKey



 ifstr(i) $(BoomCard) == TRUE ; BOOM CARD
 ;****************************************************************************************
 ; ONLY SUPPORT BOOMERANG UPDATE WHEN IT HAD NEW SERVICE NAME EL90XND IN THE REGISTRY 
 ;****************************************************************************************

	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\El90xnd" $(!REG_KEY_ALL_ACCESS) KeyService
	Ifstr $(KeyService) == ""
		Set DlgText = "UPDATE not supported. Please remove this NIC and reinstall it"       
		Shell "Subroutn.Inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(DlgText) 
		goto end
	endif  

	CloseRegKey $(KeyService) 
	set CorrectProdHWName = $(NDProdHWName)
	set CorrectProdSWName = $(NDProdSWName)
	set CorrectNetRuleSWType = $(NDNetRuleSWType)
	set CorrectNetRuleSWBindForm = $(NDNetRuleSWBindForm)
	set CorrectNetRuleSWClass = $(NDNetRuleSWClass)
	set CorrectNetRuleSWBindable = $(NDNetRuleSWBindable)
	set CorrectNetRuleHWBindForm = $(NDNetRuleHWBindForm)
	set CorrectNetRuleHWType = $(NDNetRuleHWType)
	set CorrectNetRuleHWClass = $(NDNetRuleHWClass)
	set CorrectProdKeyName = $(NDProdKeyName)
	set CorrectParamKeyName = $(NDParamKeyName)

	ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
		set CorrectNetEventDLL = $(ND4NDNetEventDLL)
		set CorrectProdSWImagePath = $(ND4NDProdSWImagePath)
		set CorrectProdSWUpgradePath = $(ND4NDProdSWUpgradePath)
	else
		set CorrectNetEventDLL = $(ND3NDNetEventDLL)
		set CorrectProdSWImagePath = $(ND3NDProdSWImagePath)
		set CorrectProdSWUpgradePath = $(ND3NDProdSWUpgradePath)
	endif

 else ; 90XBC CARD

	set CorrectProdHWName = $(ProdHWName)
	set CorrectProdSWName = $(ProdSWName)
	set CorrectNetRuleSWType = $(NetRuleSWType)
	set CorrectNetRuleSWBindForm = $(NetRuleSWBindForm)
	set CorrectNetRuleSWClass = $(NetRuleSWClass)
	set CorrectNetRuleSWBindable = $(NetRuleSWBindable)
	set CorrectNetRuleHWBindForm = $(NetRuleHWBindForm)
	set CorrectNetRuleHWType = $(NetRuleHWType)
	set CorrectNetRuleHWClass = $(NetRuleHWClass)
	set CorrectProdKeyName = $(ProdKeyName)
	set CorrectParamKeyName = $(ParamKeyName)

	ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
		set CorrectNetEventDLL = $(ND4BCNetEventDLL)
		set CorrectProdSWImagePath = $(ND4BCProdSWImagePath)
		set CorrectProdSWUpgradePath = $(ND4BCProdSWUpgradePath)
	else
		set CorrectNetEventDLL = $(ND3BCNetEventDLL)
		set CorrectProdSWImagePath = $(ND3BCProdSWImagePath)
		set CorrectProdSWUpgradePath = $(ND3BCProdSWUpgradePath)
	endif

 endif ; END CHECK CARD


 ;****************************************************************************************
 OpenRegKey $(!REG_H_LOCAL) "" $(CorrectProdKeyName) $(!REG_KEY_ALL_ACCESS) KeyProduct 
 Ifstr $(KeyProduct) != "" 
	Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) 
	ifint $($ShellCode) != $(!SHELL_CODE_OK) 
		Debug-Output "ShellCode error" 
		goto ShellCodeError 
	endif 

	set !UG_Filename = $($R0) 
	install "Install-INF" 
	ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS 
		goto fatal 
	endif 

	SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProdMajorVer)} 
	SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProdMinorVer)} 
	SetRegValue $(KeyProduct) {Review,$(NoTitle),$(!REG_VT_DWORD),$(ProdReview)} 
	SetRegValue $(KeyProduct) {EDVersion,$(NoTitle),$(!REG_VT_SZ),$(EtherDiskVersion)} 
	CloseRegKey $(KeyProduct)

	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(CorrectProdHWName) $(!REG_KEY_ALL_ACCESS) KeyService
	Ifstr $(KeyService) != "" 
		SetRegValue $(KeyService) {ImagePath,$(NoTitle),$(!REG_VT_SZ),$(CorrectProdSWUpgradePath)}
	else 
		goto fatalregistry
	endif  
	
	CloseRegKey $(KeyService) 
	OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\EventLog\System\"$(CorrectProdHWName) $(!REG_KEY_ALL_ACCESS) KeyEventLog

	Ifstr $(KeyEventLog) != "" 
		SetRegValue $(KeyEventLog) {EventMessageFile,$(NoTitle),$(!REG_VT_SZ),$(CorrectNetEventDLL)} 
	else 
		goto fatalregistry 
	endif 

	CloseRegKey $(KeyEventLog)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase) $(!REG_KEY_ALL_ACCESS) KeyNt 

;******************************************************************************************************************
;Paul May 10/8/99
;Update Loop

		set ValueEnable = ENABLE 
		set Count 	= "0"
		set MaxLoop	= "128"
		
		Begin_Upgrade_Loop =+


		;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) WARNING "Count equals "$(Count)
		
		OpenRegKey $(KeyNt) "" $(CorrectProdHWName)$(Count)"\Parameters" $(!REG_KEY_ALL_ACCESS) TestKey 
		ifstr $(TestKey) != $(KeyNull) 
			OpenRegKey $(!REG_H_LOCAL) "" $(NetworkCardsKey)$(Count)"\NetRules" $(!REG_KEY_ALL_ACCESS) NetCardKey 
			ifstr $(NetCardKey) != $(KeyNull) 
				SetRegValue $(NetCardKey) {"InfName",$(NoTitle),$(!REG_VT_SZ),$(!UG_Filename)} 
				CloseRegKey $(NetCardKey) 
			else
				goto Emergency_Out
			endif 
			CloseRegKey $(TestKey) 
		endif 
	
		;Increment Loop counter then compare against maximum allowed value
		set-add Count = $(Count),"1"

		ifstr(i) $(Count) == $(MaxLoop)
			
			goto Emergency_Out
		else
			
			goto Begin_Upgrade_Loop
		endif

;******************************************************************************************************************
Emergency_Out =+

 else 
	goto fatalregistry 
 endif 
 ;endif




 ifstr(i) $(BoomCard) == FALSE  
     ;install "Install-3nicdiag" 
     install "Install-OptionNewNDIS"
     goto laststep   
 else
    goto upgradeOldNDIS;
 endif

upgradeOldNDIS =+

 ifstr $(!STF_PLATFORM) == $(INF_PROCESSER) 


	ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 

		;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" + 	 
		;$(!REG_KEY_ALL_ACCESS) KeyNt 	 

		;set TrayIconList = {TCASUTIEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"} 	 
		;SetRegValue $(KeyNt) $(TrayIconList) 

		;DeleteRegValue $(KeyNt) "COMSMDEXE"
		;CloseRegKey $(KeyNt) 	 

		ifstr $(Install_3NIC_Diag) == "YES" 
			Debug-Output "$(InfFile) : (Install_3NIC_Diag) == "YES"" 
			; Shell "", DiagRegistry 

			; ***
			 ;install "Install-3nicdiag" 

			set InstallMode_Save = $(!NTN_InstallMode) 
			set !NTN_InstallMode = install 
			set SRCDIR_OVERRIDE_Save = $(!STF_SRCDIR_OVERRIDE) 
			set !STF_SRCDIR_OVERRIDE = $(SrcDir) 

			Shell $(!STF_WINDOWSSYSPATH)\TCAITDI.INF, InstallOption, $(CurrLang), + 
			"TCAITDI" ,$(SrcDir), YES, YES, YES, NO 
			set !NTN_InstallMode = $(InstallMode_Save) 
			set !STF_SRCDIR_OVERRIDE = $(SRCDIR_OVERRIDE_Save) 
	 
			ifstr(i) $(Install_Shortcuts) == "YES" 
				Debug-Output "$(InfFile) : (Install_Shortcuts) == "YES"" 
				; *** Responsilibity of the MasterNavigator ***
				; RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-setup" 

				;Debug-Output "$(InfFile) : Enabling Tray Icon" 
				;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows\CurrentVersion\Run" +
				;$(!REG_KEY_ALL_ACCESS) KeyNt 

				;set TrayIconList = {TCASUTIEXE,$(NoTitle),$(!REG_VT_SZ),$(TrayIconExe)" -off"} 
				;SetRegValue $(KeyNt) $(TrayIconList)
				;DeleteRegValue $(KeyNt) "COMSMDEXE" 
				;CloseRegKey $(KeyNt) 
			endif 
		endif 
	endif 
 endif



 ;********************************************************************************

 install "Install-Option"

 ;*********************************************************************************
laststep =+
 ;*********************************************************************************


 ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS 
	Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" 
	ifint $($ShellCode) != $(!SHELL_CODE_OK) 
		goto ShellCodeError 
	endif 

	set Error = $($R0) 
	goto fatal 
 endif

 ; *** Responsilibity of the MasterNavigator ***
 ; RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-upgrade" 
 goto end

successful = +
 Debug-Output "$(InfFile) : Successful"
 goto end

abandon = +
 Debug-Output "$(InfFile) : Abandon"
 ForListDo $(OEM_ABANDON_OPTIONS)
	 Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
	 $(CorrectProdSWName), $($)
	 ifint $($ShellCode) != $(!SHELL_CODE_OK)
		 goto ShellCodeError
	 endif

	 set RegistryErrorIndex = $($R0)
	 Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		goto fatalregistry
	 endif	
 EndForListDo

 Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
	Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
	$(CorrectProdSWName), FALSE
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif

	detect checkFileExist
	set Uninst = *($(uninstFound), 1)

	; *** Responsilibity of the MasterNavigator ***
	;ifstr(i) $(Uninst) == "un3c90xa.exe"
	;	ifstr(i) $(!STF_PLATFORM) == $(INF_PROCESSER) 
	;		RunProgram ExitCode "Windows Directory" "" $(UnInstallerEXE).EXE "-inf" 
	;	endif
	;endif

	set RegistryErrorIndex = $($R0)
	Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
		goto fatalregistry
	endif
 endif
 goto end


warning = +
 Debug-Output "$(InfFile) : warning"
 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
 endif

 ifstr(i) $($R1) == "OK"
	goto $(to)
 else-ifstr(i) $($R1) == "CANCEL"
	goto $(from)
 else
	goto "end"
 endif


nonfatalinfo = +
 Debug-Output "$(InfFile) : nonfatalinfo"
 Set CommonStatus = STATUS_USERCANCEL
 Set Severity = STATUS
 goto nonfatalmsg


nonfatal = +
 Debug-Output "$(InfFile) : nonfatal"
 Set Severity = NONFATAL
 goto nonfatalmsg


nonfatalmsg = +
 Debug-Output "$(InfFile) : nonfatalmsg"
 ifstr(i) $(Error) == ""
	Set Severity = NONFATAL
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
 
	set Error = $($R0)
 endif

 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
 endif

 ifstr(i) $($R1) == "OK"
	goto $(from)
 else
	goto "RemoveAdapter"
 endif


fatalregistry = +
 Debug-Output "$(InfFile) : fatalregistry"
 Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
 endif
 set Error = $($R0)
 goto fatal


fatal = +
 Debug-Output "$(InfFile) : fatal"
 ifstr(i) $(Error) == ""
	Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
	ifint $($ShellCode) != $(!SHELL_CODE_OK)
		goto ShellCodeError
	endif
	set Error = $($R0)
 endif

 Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
 ifint $($ShellCode) != $(!SHELL_CODE_OK)
	goto ShellCodeError
 endif
 goto setfailed


ShellCodeError = +
 ifint $($ShellCode) == $(!SHELL_CODE_NO_SUCH_INF)
	Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_NO_SUCH_INF"
 else-ifint $($ShellCode) == $(!SHELL_CODE_NO_SUCH_SECTION)
	Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_NO_SUCH_SECTION"
 else
	Debug-Output "$(InfFile) : ShellCodeError - SHELL_CODE_ERROR"
 endif

 set DlgType = "MessageBox"
 set STF_MB_TITLE = $(ShellCodeErrorTitle)
 set STF_MB_TEXT = $(ShellCodeErrorText) 
 set STF_MB_TYPE = 1
 set STF_MB_ICON = 3
 set STF_MB_DEF = 1
 ui start "Error Message"
 goto setfailed


setfailed = +
 Debug-Output "$(InfFile) : Setfailed"
 set CommonStatus = STATUS_FAILED
 ifstr(i) $(OEM_ABANDON_ON) == TRUE
	set OEM_ABANDON_ON = FALSE
	goto abandon
 endif
 goto end


end = +
 goto term


term = +
 Return $(CommonStatus)



[checkFileExist]
 uninstFound = {} ? $(!LIBHANDLE) FindFileInstances $(!STF_WINDOWSSYSPATH)"\un3c90xa.exe" 
 DiagFound = {} ? $(!LIBHANDLE) FindFileInstances $(!STF_WINDOWSSYSPATH)"\tcaudiag.exe" 

[Install-Option]
 set STF_VITAL = ""
 set STF_OVERWRITE = "VERIFYSOURCEOLDER"
 Debug-Output $(InfName)"Adding files: Files-$(NDIS_VER), SrcDir=$(SrcDir)"
 AddSectionFilesToCopyList Files-$(NDIS_VER) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers

	; DA installationn is now the responsibility of the Master Navigator
	; ifstr(i) (*($(CurrentVersionValue),4)) == $(NT400VersionConstant) 
	; 	AddSectionFilesToCopyList Files-DA $(SrcDir) $(!STF_WINDOWSSYSPATH)
	; endif

 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit

 ;***********************************************************************************
[Install-OptionNewNDIS]
 set STF_VITAL = ""
 set STF_OVERWRITE = "VERIFYSOURCEOLDER"
 Debug-Output $(InfName)"Adding files: Files-$(NDIS_VER), SrcDir=$(SrcDir)"
 AddSectionFilesToCopyList Files-905BC$(NDIS_VER) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit
 ;**************************************************************************************

[Install-3nicdiag]
 set STF_VITAL = ""
 set STF_OVERWRITE = "VERIFYSOURCEOLDER"
 AddSectionFilesToCopyList Files-3nicdiag $(SrcDir) $(!STF_WINDOWSSYSPATH)
 ;AddSectionFilesToCopyList Files-Cpl $(SrcDir) $(!STF_WINDOWSPATH)
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit

[Install-INF]
 set STF_VITAL = ""
 AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit


[Install-Uninstaller]
 set STF_VITAL = ""
 set STF_OVERWRITE = "VERIFYSOURCEOLDER"
 AddSectionFilesToCopyList Files-Uninstaller $(SrcDir) $(!STF_WINDOWSSYSPATH)
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit

[Install-OTHER]
 set STF_VITAL = ""
 AddSectionFilesToCopyList Files-OTHER $(SrcDir) $(!STF_WINDOWSSYSPATH)
 set !STF_NCPA_FLUSH_COPYLIST = TRUE
 CopyFilesInCopyList
 Exit

[Source Media Descriptions]
 1 = "ECD520P90X", TAGFILE = 3CDdisk1 

[ProductType]
 STF_PRODUCT = Winnt

[Files-Inf] 
 1, oemsetup.inf,SIZE=36000, RENAME=$(!UG_Filename)

[Files-905BCNDIS3]
 1,EL90xBC3.SYS , SIZE=25001

[Files-905BCNDIS4]
 1,EL90xBC4.SYS , SIZE=25001

[Files-NDIS3]
 1,EL90xnd3.SYS , SIZE=25001

[Files-NDIS4]
 1,EL90xnd4.SYS , SIZE=25001

[Files-3nicdiag]

 1,TCAUDIAG.EXE, SIZE=165504
 1,TCAUDIAG.URL, SIZE=15
 1,TCAUDIAG.HLP, SIZE=20877
 1,TCAUPROT.HLP, SIZE=20877
 1,TCAUM90X.HLP, SIZE=20877
 1,TCAUDCUS.TXT, SIZE=113
 1,TCAUDEXP.TXT, SIZE=113
 1,TCAUPROT.DLL, SIZE=12345
 1,TCAUM90X.DLL, SIZE=12345
 1,TCAMHWAC.DLL, SIZE=20198
 1,TCAICCHG.SYS, SIZE=5000
 1,TCAITDI.INF, SIZE=15000

[Files-DA]
 1,DAINST.EXE, SIZE=800000

[Files-Uninstaller]
 1,UN3C90XA.EXE, SIZE=6617

[Files-OTHER]
 1, Nicprop.exe,SIZE=24000

[LanguagesSupported]
 ENG

[OptionsTextENG]
 3C90X = "3Com EtherLink PCI NIC"
 
[FileConstantsENG]
 ProCaption = "Windows NT NIC Setup"
 ProCancel = "Cancel"
 ProCancelMsg = "Windows NT Networking is not correctly installed. "+
 "Are you sure you want to cancel copying files?"
 ProCancelCap = "Network Setup Message"
 ProText1 = "Copying:"
 ProText2 = "To:"

 ConnectionList = ^(ConnectionChoices, 1)
 ConnectionValues = ^(ConnectionChoices, 2)
 NoList = ^(NoChoices, 1)
 NoValues = ^(NoChoices, 2)
 ShellCodeErrorTitle = "Error: "$(Function$(Option)Title)
 ShellCodeErrorText = "Shell Code Error."
 CANNOT_FIND_ANY_CARD = "Network card is not present in the system"
 CANNOT_FIND_ANY_UNINSTALLED_CARD = "All the NICs supported by this product have already been installed."

[DialogConstantsENG]
 Help = "&Help"
 Exit = "Cancel"
 OK = "OK"
 HelpContext = ""
 Continue = "Continue"
 Cancel = "Cancel"

;(%VER OEMSETUP.INF - Installation file for 3C90X - v5.2.10 Root)
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.09