Localize.ini Driver File Contents (epson11740.exe)

//------------------------
// ƒƒCƒ“‰æ–Ê
//------------------------
00000002=Select a printer, then select the function you want to perform.
00000003=Printer
00000004=Auto Adjustment
00000005=Perform alignment or a nozzle check and head cleaning automatically.
00000006=Custom Paper Setup
00000007=Customize print settings for your media and save them to the printer under a unique name.
00000008=Activate Custom Paper
00000009=Activate a Custom Paper Setup saved to the printer.
00000010=Clock Setting
00000011=Set the printer's internal clock.
00000012=Printer Information
00000013=View or print various information about the printer.
00000014=Bidirectional Alignment
00000015=Fixes misaligned vertical lines and allows very precise alignment of each color.
00000016=Unidirectional Alignment
00000017=Fixes misaligned vertical lines and allows very precise alignment of each color to BK.
00000100=Select Printer...
00000101=Help
00000190=Quit
00000180=Exit
00000200=Select a printer.


//------------------------
// Ž©“®’²®‰æ–Ê
//------------------------
00010002=Auto Adjustment is for use with coated media only.
00010003=Media Type
00010004=Paper Thickness
00010005=(0.1mm)
00010006=Platen Gap
00010007=Auto Bidirectional Alignment
00010008=Select a dot size, #1-#3, then click Start to perform bidirectional alignment automatically.
00010009=Auto Unidirectional Alignment
00010010=Select a dot size, #1-#3, then click Start to perform unidirectional alignment automatically.
00010011=Auto Nozzle Check and Head Cleaning
00010012=Click Start to perform an automatic nozzle check and, if the nozzle check indicates it is necessary, an automatic head cleaning.
00010100=Start
00010104=Close
00010200=Other
00010201=Auto
00010202=Wider
00010203=Wide
00010204=Standard
00010205=Narrow
00010206=Widest


//------------------------
// ƒ†[ƒU[—pŽ†“o˜^‰æ–Ê
//------------------------
00020002=Custom Name
00020003=Referential Media Type
00020007=More Settings 1
00020008=More Settings 2
00020009=Paper Feed Adjustment Value
00020010=(0.01%)
00020011=Drying Time per Print Head Pass
00020012=(0.1sec)
00020013=Cut Method
00020014=Eject Roller Type
00020015=Paper Suction
00020017=MicroWeave Adjustment
00020100=Details
00020102=Thickness Pattern
00020103=Save...
00020200=Unregistered
00020201=Unknown
00020209=Thick paper, Fast
00020210=Thick paper, Slow
00020211=Thin paper
00020213=Starwheel-Sheet
00020214=Starwheel-Roll Curled
00020215=No Roller-Roll Normal
00020700=Untitled


//------------------------
// ƒ†[ƒU[—pŽ†Ø‘Ö‰æ–Ê
//------------------------
00030101=Activate
00030102=Edit
00030200=STANDARD
00030036=Currently Selected Custom Paper


//------------------------
// “úŽžÝ’è‰æ–Ê
//------------------------
00040003=Synchronize the printer's internal clock with the computer's time.
00040100=Set


//------------------------
// ƒvƒŠƒ“ƒ^î•ñ‰æ–Ê
//------------------------
00050002=Job Information
00050003=Click to view information about recent print jobs.
00050004=Click to print information about recent print jobs.
00050005=Custom Paper Information
00050006=Click to print all Custom Paper information saved to the printer.
00050007=Status Sheet
00050008=Click to print a Status Sheet.
00050100=View
00050101=Print


//------------------------
// ƒMƒƒƒbƒv’²®<‘o•ûŒüˆóü>‰æ–Ê
//------------------------
00060006=Dot Size
00060102=Save


//------------------------
// ƒMƒƒƒbƒv’²®<’P•ûŒüˆóü>‰æ–Ê
//------------------------


//------------------------
// Œx‰æ–Ê
//------------------------
00040300=The clock was set correctly. 
00040301=The clock was not set correctly.  
00000300=Are you sure you want to quit?
00000301=The printer is not ready.
00000302=There is not enough free memory to run the program.
00000303=The necessary printer driver cannot be found. Install the necessary printer driver.
00000380=EPSON Status Monitor 3 cannot be found. Install EPSON Status Monitor 3.
00000304=Cannot communicate with the selected printer.
00000305=Cannot find the Help files.
00010300=Auto Adjustment is complete.
00010301=Auto Adjustment could not be completed. For more information, see the printer's control panel.
00010302=A reply has not yet been received from the printer. For more information, see the printer's control panel.
00020300=Select a Referential Media Type before opening the Details dialog box.
00020301=Custom paper information could not be obtained from the printer.
00020302=Do you want to replace the existing one?
00020303=The settings have been saved to the printer.
00020304=The settings could not be saved to the printer.
00020305=The print command was sent to the printer.
00020306=Failed to read the file because it is damaged.
00020307=Failed to read the selected file because the printer is different.
00020308=Failed to read the file because the ink set is different.
00020309=Sample prints will be made with Wider as the Platen Gap setting.
00020310=The settings could not saved.
00030301=Are you sure you want to activate the custom paper settings?
00030302=The custom paper settings have been activated. These settings will be used for all subsequent print jobs.
00030303=The paper settings have been returned from Custom to STANDARD.
00030304=The custom paper settings could not be activated.
00100300=There is no image file specified. Specify an image file or select Standard Image.
00100301=The specified file cannot be found. Specify another file or select Standard Image.
00100302=The specified file cannot be used to make sample prints. Specify another file or select Standard Image.
00100303=The specified file does not match the required image dimensions. Specify another file or select Standard Image.
00100304=An error occurred while processing the print job.
00100305=The number of sheets of paper required to complete the sample prints is indicated below. Do you want to continue?
00050300=Job information could not be obtained from the printer.
00060300=To accurately adjust alignment, the Platen Gap must first be set to STANDARD using the printer's control panel.
00060301=Enter a Paper Thickness.
00060302=Your settings have been saved.
00140300=Failed to obtain the information.
00020311=This is the Platen Gap setting for paper thickness of 0.8 mm or more.


//------------------------
// wait‰æ–Ê
//------------------------
00080000=Waiting for the printer to reply.
00080100=Cancel


//------------------------
// •Û‘¶‰æ–Ê
//------------------------
00090000=PAPER NUMBER
00090100=OK


//------------------------
// —pŽ†Ží—ނ̃Tƒ“ƒvƒ‹ˆóü‰æ–Ê
//------------------------
00100400=Media Type Details
00100001=Sample Image
00100600=Standard Image
00100601=User Defined Image
00100100=Sample Prints
00100101=Browse...


//------------------------
// —pŽ†‘—‚è•â³’l‚̃Tƒ“ƒvƒ‹ˆóü‰æ–Ê
//------------------------
00110400=Paper Feed Adjustment Detail
00110000=Test Range
00110001=min
00110002=max
00110004=Sample Prints Points


//------------------------
// ƒvƒŠƒ“ƒgƒWƒ‡ƒuî•ñ‰æ–Ê
//------------------------
00120000=Information about recent print jobs.
00120700=Copy


//------------------------
// ƒƒjƒ…[
//------------------------
00000700=File
00000701=Page Setup...
00000704=Version Information
00000706=About the Media Adjustment...
00000709=Select All
00000710=Activate Custom Paper...
00000711=Save Custom Paper...


//------------------------
// ƒAƒoƒEƒg‰æ–Ê
//------------------------


//------------------------
// —pŽ†Ý’è‰æ–Ê
//------------------------
00140400=Page Setup
00140000=Auto Cut
00140001=Paper Size
00140002=Paper Source
00140600=On
00140601=Off
00140602=Roll Paper
00140603=Manual Feed
00140604=Paper Tray


//------------------------
// ƒTƒ“ƒvƒ‹ˆóü’†‰æ–Ê(OS9‚Ì‚Ý)
//------------------------
00150090=Please wait.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.69