LANtastic 6.0 Introduction: ------------- This document describes the procedure to setup NDIS driver on LANtastic 6.0 operation system for REALTEK RTL8139 Fast Ethernet Adapter. Location of Driver: \NDIS2\DOS\RTSND.DOS Sample Configuration Files: -------------------------- CONFIG.SYS: DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI DEVICE=C:\LANTASTI\RTSND.DOS FILES=40 BUFFERS=30 STARTNET.BAT: @echo off rem LANtastic Version 6.00 installed 95/05/23 14:11:21 rem (for Windows) C: cd C:\LANTASTI SET LAN_CFG=C:\LANTASTI rem If LANtastic is disabled, skip everything. IF EXIST DISABLED GOTO :STARTNET_DONE @echo ===== Begin LANtastic configuration ===== PATH C:\LANTASTI;C:\LANTASTI\NW;%PATH% SET LAN_DIR=C:\LANTASTI.NET SET NWDBPATH=C:\LANTASTI\NW rem Please obtain the NETBEUI.EXE program from Microsoft LOADHIGH NETBEUI LOADHIGH AI-NDIS BIND_TO=RTSND_NIF AILANBIO @STARTNET.CFG REDIR TEST @STARTNET.CFG IF EXIST NOSHARE GOTO :NOSHARE SERVER C:\LANTASTI.NET @STARTNET.CFG NET LOGIN \\TEST GOTO :CONTINUE :NOSHARE @echo LANtastic server was installed but turned off. :CONTINUE rem If CONNECT.BAT exists, run it to set up connections. IF EXIST CONNECT.BAT GOTO :CONNECT rem Otherwise set up connections specified during install. NET LPT TIMEOUT 10 GOTO :CONNECT_DONE :CONNECT @echo Setting up LANtastic connections from CONNECT.BAT rem Build CONNECT.BAT like this: "NET SHOW/BATCH > C:\LANTASTI\CONNECT.BAT" rem (or run the batch file SETNET.BAT) call CONNECT.BAT :CONNECT_DONE NET POSTBOX @echo ===== End LANtastic configuration ===== :STARTNET_DONE cd \ PROTOCOL.INI: ;PROTOCOL.INI for LANtastic Version 6.00 ;------------ using ; [PROTMAN] Priority = NETBEUI DRIVERNAME = PROTMAN$ DYNAMIC = YES [RTSND_NIF] DRIVERNAME = RTSND$ Adapters=RTL8139 ;EtherID =@0123456789AB ;Medium= _Auto, _10Half, _10Full, _100half, _100Full [NETBEUI_XIF] DRIVERNAME = NETBEUI$ LANABASE = 1 BINDINGS = RTSND_NIF Install Realtek drivers for LANtastic 6.0 : (Using NDIS driver) ------------------------------------------ The installation procedure will transfer files to a specific directory on the workstation and modify existing configuration files to fit your specific needs. The installation utility INSTALL.EXE is located on LANtastic Network Software Disk 1. Run INSTALL.EXE from Disk 1 and the LANtastic Install program screen will appear. You must complete each of the questions. These options are specific to your needs. 1. Prompt you to enter a unique Computer Name. 2. Ask you to select the drive that you want LANtastic to be installed on. The default is Drive C:. 3. Ask you to specify a directory where you want the LANtastic files to be installed. The default is \LANTASTI. 4. Ask you if you want to Share your Computers Drives or Printers. 5. Ask you to select the Maximum Number of Connected Computers. 6. Prompt you to select any other LANtastic features that you may want to install. 7. A summary screen of the options you will appear. If it looks correct continue with the installation. 8. Prompt you to select a network adapter to run your LANtastic software on. From the list of adapters , select "NDIS SUPPORT FOR NETWORK ADAPTERS". 9. Ask you to insert the manufacturers driver diskette containing the driver files. Insert the RTL8139 driver diskette into drive A: and specify the source path for driver files as A:\ 10. Ask you if you want to Set Up Permanent Drive or Printer Connections. 11. Another summary screen of the options will appear. If this looks correct then select Perform the Installation and LANtastic will now install the files. 12. After the installation finish, copy NETBEUI.EXE from Microsoft MS-LAN Manager. 13. Open PROTOCOL.INI file and add a line "Drivername = netbeui$¡¨in the [NETBEUI_XIF] lable.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.