ADVANCD CD-ROM Driver
=====================
ADVANCD.SYS is a Ggeneric CD-ROM driver for DOS/WINDOWS operating system.
For automatic installations, issue the following commands
DOS
a:\install
WINDOWS 3.1 and Windows for Workgroup 3.11
run a:\dos\setup
The above programs will automatically insert these statements
DEVICE=C:\path\ADVANCD.SYS
in CONFIG.SYS and
MSCDEX.EXE /D:ADVCD0
in AUTOEXEC.BAT
The ADVANCD.SYS will accept the /P, /L and /D:name parameters.
while
/P
Pause after driver load.
/L
Specifies that ADAVNCD should scan for logical units. (By
default, logical units are not scanned)
/D:name
Specifies the device name given the driver in your CONFIG.SYS
file for use with your CD-ROM interface software. (The
default device name is ADVCD0, which will apply to all
connected CD-ROM drives.)
Technical Support
=================
For Further information on using the ADVANCD software,
configuration program, Advansys Host Adapter or this install
program please refer to your AdvanSCSI manual or contact
Advansys Technical Support:
Telephone: (800) 525-7440 24 hours, 7 days a week
Internet email: support@advansys.com
BBS: (408) 383-9540
World Wide Web: www.advansys.com
11-04-96
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.