1. Installation
The Windows SETUP utility will install the optional windows 32-bit disk access
device driver(I91CTRL.386) and Initio ASPI for Windows device driver
(WINASPI.DLL).
2. 32-Bit Disk Access Driver
- 32-Bit disk access driver works under Windows 3.1, Windows 3.11, and
Windows for Workgroups 3.11.
- 32-Bit disk access driver requires the DOS ASPI (ASPI910U.SYS) to be
properly loaded.
- If you can not run Windows after installing the Initio 32-Bit disk
access device driver, use the following command line to temporarily
disable the 32-Bit disk access driver:
win /d:f [ENTER]
- To permanently disable 32-Bit Disk Access, remove the
following lines from the [386Enh] section in the SYSTEM.INI file,
using an appropriate text editor:
DEVICE=INT13.386
DEVICE=I91CTRL.386
3. ASPI for Windows
- Initio Windows ASPI Driver (WINASPI.DLL) requires the DOS ASPI Driver
(ASPI910U.SYS) and 32-Bit disk access driver to be loaded and
functioning properly.
- Initio Windows ASPI Driver only functions under Windows Enchanced mode.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.