PLANET Technology ADU-2000 Release Notes (Driver v099.040) New Features 1. DSLWizard: Installation operation will now abort on the fourth reboot. 2. Added Spanish-only application manual build capability 3. DSLWizard: Install screen protocol buttons are dynamically loaded and displayed Left to Right, Top to Bottom, depending on the number of protocols specified by the INS files 4. DSLWizard: IP Address, DNS Server and Default Gateway screens will be automatically displayed after the NEXT> key on the Install screen if RFC1483, Static IP are selected, and the IP Address is 0.0.0.0 5. Added support in install DLL to detect USB hardware prior to device installation by DSLWizard 6. DSLWizard: Removed "hardware has been detected" from install screen message if USB device 7. Updated USB low-level driver components to USBADSL_030102_REL2 Problems Fixed Since 099.032 Release 1. Fixed USB DSLWizard installation abort in Win98Gold/SE 2. Updated Controller Code from v2.19 to v2.25, which includes following improvements: ----- Corrected report of D/S SNR margin in Centillium-based COs only. ----- Improved connection speed with some older Alcatel DSLAMs ----- Fixed bug resulting in intermittent low upstream rate mode against Globespan CO in T1.413 ----- Fixed problem with upstream rates above 928 kbps with some Globespan and TI DSLAM¡¦s. ----- Long loop connection problem with Cisco 8-port DSLAM in T1.413 mode ----- Fixed problem when changing handshake modulation on control panel. ----- Initial Autosense Timeout problem causing failure to detect CO on some loops. ----- Report 63 dB line attenuation to CO ----- Decrease G.HS timing from C_TONE detected to transmit silent ----- Fixed autosense locking to the wrong modulation. ----- SNR margins and their stability are increased for some crosstalk/loop combinations. ----- SNR margins and their stability are increased for both medium and long loops. ----- Enabled upstream pilot tone in T1.413 to enhance reliability with some DSLAM¡¦s. ----- Improved upstream rates to 640 kbps for loops up to 6700 ft with certain ADI DSLAMs in both BNA and Non-Specific modes. ----- Fixed T1.413 training issue with some FG4 Alcatel DSLAM¡¦s. ----- Eliminate wait for Alcatel CO to be quiet in G.HS startup. This reduces G.HS startup time. ----- Optimized upstream connect rates with Texas Instruments DSLAMs after power-down/power-up sequence 4. DSLWizard: Cancel key on Bitmap install screen caused wrong screen to be displayed 5. DSLWizard: Added support to delete the CxtInst.inf when it is in the Windows INF\OTHER subfolder and starts with a name other than Conexant 6. Fixed PPPoE interoperability problem with Cisco server 7. Corrected problem with PPPoE disconnect 8. DSLWizard: Protocol buttons were not displayed in BMP mode after hitting <BACK from the IP Address screen 9. DSLWizard: Adjusted Class Installer timing to help insure that Setup.exe is started even if computer reboots during Class Installer install 10. Corrected DSLWizard to not add a DNS server address of "0.0.0.0" if the address is not defined 11. USB WAN: VcDisconnectDelay is not 30 seconds 12. DSLWizard: Multiple radio buttons can be selected on "Restore the DSL Device" screenDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.