Pegas.USB Version 2.50 - June 17, 1999
==========================================
Bug Fixes
----------
1191 V.34 connection problem in answer mode
Improvements/Changes/Requirements
---------------------------------
1205 Set RFC signal all the time during pulse dialing
1188 V.90 connectivity improvements
1179 V.90 optimizations for slow CPUs
1171 MO option available
1095 Improvements for ISDN PBX in Europe
Pegas.USB Version 2.43 - June 8, 1999
==========================================
Bug Fixes
----------
1183 V.34 connectivity improvements
1161 Some files are not deleted during uninstall
Improvements/Changes/Requirements
---------------------------------
1185 Added profiles for Luxembourg, Greece, Iceland and Hungary
804 V.90 Connectivity improvements for long distance calls
Pegas.USB Version 2.42 - May 16, 1999
==========================================
Bug Fixes
----------
1150 Ring is not identified in Hong-Kong
1110 Crash in using BVRP application calling MINITEL
1062 Wrong dial tone detection while recording incoming message
Improvements/Changes/Requirements
---------------------------------
1170 Control over FAX tx level added for Japan PTT approval
1168 V.32 supports S10 (*100ms) disconnect time
1167 Improved interoperability with Connexant modems
1166 Calling tone disabled as default
1151 Adjust european countries' parameters to CTR21 requirements
1131 V.34 Ineroperability improved
1125 Interoperability with Brother FAX machines
1079 Ring detector improvements for Australia
918 V.90 Connectivity improvements for Korea
Pegas.USB Version 2.40 - April 26, 1999
==========================================
Bug Fixes
----------
1095 ISDN lines do not connect V.90
1089 Ring is not identified in Japan
1079 Ring is not identified in Australia
1031 SLClean doesn't delete all .inf files in %WINDIR%\INF\
994 Country setting not saved with SLCustom application
935 Crash while disconnect Dial Up from ISP
916 ATD does not work properly (+LED)
Improvements/Changes/Requirements
---------------------------------
1082 V.90 optimizations for low power CPUs
1056 Prevent using / in Product Name string
1052 Fix AT%T V.27signal by -6dB
1051 Modem should disconnect 1-3 secs after the remote modem disconnects
1035 V.34 supports 2400 bps
1032 Support for International DAA option
1026 Calling tone (^) support added
1023 Change MODIO to a customer modifiable field in Uninstall Dialog Box
Pegas.USB Version 2.32 - March 16, 1999
==========================================
Bug Fixes
----------
1008 Problems in at%t23 - at%t38
974 Installation problems on Com2 with Toshiba Laptop
961 at+ms=212 connects V.34
935 Crash while disconnect Dial Up from ISP
Improvements/Changes/Requirements
---------------------------------
1007 USB End User License Agreement
Pegas.USB Version 2.30 - February 21, 1999
==========================================
Bug Fixes
----------
970 Fax Tx Level Problems (for JATE)
969 Tone signal level problems in VTS command
955 A-F and a-f tones are not allowed in dialing string
949 Unstable CLID
948 Wave device is not removed during uninstallation
935 Crash while disconnect from ISP
919 ATS7 does not work correctly
911 Noise on speakers using QuickLink application
886 Crash in second V.80 session activation under VideoLink
874 Low V.90 connection rates on certain lines in Taiwan
873 Low V.90 connection rates on certain lines in Taiwan
863 Device does not respond after suspend mode on Toshiba laptop
843 Busy tone is not detected in Brazil
835 System halt on answering calls
834 Busy tone is not detected in Brazil
833 V.34 goes from 14.4K directly to 4.8K when injecting noise
830 V.80 / H.323 modes does not work
822 Fax on demand problem with QLMC
820 V.90 poor behaviour with rates 53333 and 54666
804 V.90 long distance calls other modem asks for low upstream rate and hangs
801 Delete Files on Unistall option does not work
791 V.34 does not connect when low SNR
789 V.34 fails to connect on very noisy lines
779 CLID does not work on French lines
745 Caller ID detection problem in TAPI Applications
692 Sensitivity to clock deviation
Improvements/Changes/Requirements
---------------------------------
982 PTTWizard's help better describes BlackListing.FailedAttemptsAllowed
parameter
950 V.90 connectivity improvmed on some lines
942 Added country CTR21 Europe
934 Phone number added to black list after interrupted dialing
933 PTTWizard now supports DTMF levels changing
929 K56Flex improvments
921 SMCFG runs after installation as default (for country setting)
900 ATI7 displays country settings
896 Enable control over CID timeout duration by an S-Reg
895 The blacklisted numbers are defined with 'T' or 'P'
889 AT&P command is disabled for Japan and can be disabled for other
countries as well through a parameter
885 SLCustom support for LEDs and Buzzer options
879 Problems calling FICnet ISP in Taiwan
876 AT#UD command collects & reports more data
874 Low V.90 connection rates in Taiwan
867 SLLights can be customized to display either initial or actual
connection rate
865 Add to AT#UD support for near and far echo measurements
858 V.90 major version upgrade
842 External applications can be spawned after installation
840 BlackListing returns DELAYED or BLACKLISTED instead of ERROR
836 Stability improvement for many calls
828 Official UHCD.SYS file included
808 Strings changes in INF files
780 LEDs for CD, Data flow and buzzer support
636 SLLight should allow to display the updated Connection Rate
SmartLink Modio Version 2.02.12 - December 9, 1998
===================================================
Bug Fixes
----------
795 V.34 CRC problems while calling different providers
791 V.34 does not connect when low SNR
787 Dialing from HyperT with no phone line connected causes machine to hang
758 Livingston modem V90 connection fails (Pre Filter)
747 RTK:Win98 crashes or stops to respond during wake-up on ring
Improvements/Changes/Requirements
---------------------------------
784 USB: drivers kit update - preparing for distribution
800 Move INF parameters from external loading to internal settings
790 Several V.90 problems fix
772 Change of RRN set from V42 parameters
760 Add parameter for delay before resuming error-counting after RRN
SmartLink Modio Version 2.02.05 - November 29, 1998
===================================================
Bug Fixes
----------
757 Connection to K56surfr modem fails
753 V.90 for USB, A-law RRN calibrations, and general V.90 update
752 Call progress should support filter: 296-504
749 USB: V8 problem with connection to USR
745 Caller ID detection problem
744 Modem fails to connect to Cirrus modem (V8 bug)
739 USB: Sudden explosion of Error Energy in V.90
733 Sine wave transmission mode stopped working
728 Support dial tone threshold with PTT wizard
727 V.42 must not be negotiated when connected with Bell 103, v21 and V23 protocols
724 Incorrect transmission level in V.90 & K56 flex in phase 3
720 Singapore and China should be marked as A-law
716 Modifications for Livingstone modem
697 V.32 - better performance
695 Rate negotiation leads to disconnection
694 USB: V.90 connection problem vs. USR
Improvements/Changes/Requirements
---------------------------------
756 Add homologation parameter for blacklisting timeout
754 Add platform-dependent dynamically loaded data pump parameter for all platforms
751 New Sregs value for V42 RRN command
735 Support V90 mode in which v8bis will not be run in any case
731 Default Country Settings support by new SLCustom
726 Adjust default homologation settings for dial tone wait time
719 USB: Software ROHM (part 1) is added to USB project
714 New (approved) standard for BlackList
713 Implement range checking for the following homologation parameters: Dial Tone Wait Time
(SReg 6), No Answer Timeout (SReg 7) and DTMF Dial Speed (SReg 11)Implement range
checking
712 Implement datapumps' parameter loading from registry
706 DC removal needed
699 USB: Enable retrain due to ovf. & unf. - while in 'extended' data mode.
693 Show real echo canceler length with mtl_show or showDiag
691 USB: V90 must work with PTC gap of 4 from phase 3
682 Support for Power-Up Notification
SmartLink Modio Version 2.00.06 - October 8, 1998
=================================================
Bug Fixes
----------
618 lots of CRC error due to high rate in V.90
590 V.32 connects @ 14400 rather than 9600
582 When Dial string faulty, Modem to return ERROR immediately and NOT go off hook
503 V42 connection problems over V.32 when other modem is set to rate 9600
Improvements/Changes/Requirements
---------------------------------
605 New Modem's property page
603 AT#UD support in V.34
600 Power reduction support in V.90
587 Logging improvements (VxDMon)
583 56KFlex resides in separate VXD
577 Renaming: changing the hard-coded conventions (drivers & Registry entries)
563 Full Homologation and V.90 support
499 at%t commands support
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.