DOSODI.TXT Driver File Contents (ln8110_lan_driver.zip)

*****************************************************************************
*                                                                           *
*                 32-Bit CardBus Fast Ethernet PC Card                      *
*                                                                           *
*                    ODI Driver for DOS Workstation                         *
*                                                                           *
*****************************************************************************


Before Installation, please first follow below operations.

1. Copy encbodi.bat 
        ..\rtpci.exe
        ..\rtbios.com  to the same directory.

2. Execute encbodi.bat


Installation:
=============

  Driver Installation with existing Netware client programs:
  ----------------------------------------------------------
  A) Using NETX.EXE:
     If there are Netware client programs such as LSL.COM, IPXODI, and
     NETX.EXE in your system already, you can use the following procedures
     to setup your system.

     1. Copy the A:\NWCLIENT\RTSODI.COM file to the Netware client
        directory which contains NET.CFG, LSL.COM, IPXODI.COM, and NETX.EXE
        files.

     2. Update the NET.CFG file. You can refer to the NET.CFG sample.

     3. Make sure to add LASTDRIVE=Z in your CONFIG.SYS file if your want the
        first network drive to be F.

     4. Enter the following commands to connect to your Novell server:
               LSL
               RTSODI
               IPXODI
               NETX
               F:
               LOGIN <user_name>

  B) Using VLM.EXE:
     If there are Netware client programs such as: LSL.COM, IPXODI, and
     VLM.EXE in your system already, you can use the following procedures
     to setup your system.

     1. Copy the A:\NWCLIENT\RTSODI.COM file to the Netware client
        directory which contains NET.CFG, LSL.COM, IPXODI.COM, and VLM.EXE
        with related *.VLM files.

     2. Update the NET.CFG file. You can refer to the NET.CFG sample.

     3. Make sure to add LASTDRIVE=Z in your CONFIG.SYS file.

     4. Enter the following commands to connect to your Novell server:
               LSL
               RTSODI
               IPXODI
               VLM
               F:
               LOGIN <user_name>


  NOTE:
  -----
    Multiple LAN cards in a system:
      If you want to install mutiple LAN card in your system, you have
      to use "BUSNO" and "DEVICENO" keyword in NET.CFG to select which
      card to use with your netware client.(or you can use "EtherID")
      You can use the diagnostic program (A:\SETUP.EXE) under DOS
      prompt to show all the Ethernet addresses of your PC cards.


Configuration Files:
====================

    File Name:          NET.CFG
    ----------
    Sample of configuration file:
    -----------------------------
           .
           .
           .
    Link Driver RTSODI
            FRAME Ethernet_802.2
            FRAME Ethernet_802.3
            FRAME Ethernet_II
            FRAME Ethernet_SNAP

    ODI Driver Custom Keywords
    --------------------------
    Specify PC card's medium which identifys PC card's speed and duplex mode.
    There are five medium values: AUTO, 10HALF, 10FULL, 100HALF, 100FULL.
            MEDIUM  AUTO     ;operate on auto negotiation mode
            MEDIUM  10HALF   ;operate on 10M/HalfDuplex mode
            MEDIUM  10FULL   ;operate on 10M/Fullduplex mode
            MEDIUM  100HALF  ;operate on 100M/HalfDuplex mode
            MEDIUM  100FULL  ;operate on 100M/Fullduplex mode

    Use the following two methods to specify the selected PC card
    when using two or more cards in a machine. (for Multiple Cards)
    ---------------------------------------------------------------
    (1) Use the PCI Bus Number and the PCI Device Number
        (You can get these numbers from the  "View Current Configuration"
        of the Setup program (SETUP.EXE).)
            BUSNO 0
            DEVICENO 10

    (2) Use the Node Address
            ETHERID 005022123456

----
All trademarks or brand names mentioned are properties
of their respective companies.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 0.73