1. PD120_eOpenMan.zip Driver
2. config.ini File Contents

config.ini Driver File Contents (PD120_eOpenMan.zip)

[MSS Resolution]
ResolutionX=1024
ResolutionY=768

[MSS Non-edit Customize]
;Value
; 0:Not draw line
; 1 and other value:Draw line
Line=1

;Value
; (R,G,B):Color of line if line is drawn, the default value is (0,0,0)
Line_Color=(0,0,0)

;Value
; (R,G,B):Color of non-edit area, the default value is (255,255,255)
Area_Color=(255,255,255)

[MSS Download]
;Value
;  	0 or other value:Type 0 and the last version number will plus 0
;  	1:Type 1 and the last version number will plus 1
;  	
;  	Type 0:
;  	1. If the AC power cord of the projector was unplugged, plug the AC power.
;  	2. If the projector was turned on, press power button twice to turn off the projector.
;  	3. Make sure all the fan of projector was shut down and the "Power" LED is blinking.
;  	4. Press and hold "Menu/Enter" button then press "Power" button.
;  	5. When "Temp" and "Lamp" LEDs turn on again, release both buttons, projector enters download mode.
;  	6. Please make sure the USB cable has been plugged and connected to  your projector.
;  	
;  	Type 1:
;  	1. If the AC power cord of the projector was unplugged, plug the AC power.  	
;  	2. If the projector was turned on, press power button twice to turn off the projector.
;  	3. Unplug the AC power cord from the projector.
;  	4. Press and hold "Menu" and "Power" buttons simultaneously then plug the AC power cord to the projector.
;  	5. When Temp and Lamp LEDs are turned light, release both buttons, projector enters download mode.
;  	6. Please make sure the USB cable has been connected to the projector from your PC.
DL_StepType=1