1. DC2110.zip Driver
2. DC2110.INF File Contents

DC2110.INF Driver File Contents (DC2110.zip)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
;	BENQ Camera (A10) VID04A5&PID3002
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

[Version]
Signature="$CHICAGO$"
Class=USB
provider=%MSFT%

[Manufacturer]
%MfgName%=BENQ

[BENQ]
%USB\VID_04A5&PID_3002.DeviceDesc%=DG200.Dev,USB\VID_04A5&PID_3002
%DG200\DISK.DeviceDesc%=DG200pdr.Dev,DG200\DISK

[PreCopySection]
HKR,,NoSetupUI,,1

[DestinationDirs]
; \<WINDIR>\SYSTEM32\DRIVERS
dg200.files = 10,System32\Drivers

; \<WINDIR>\SYSTEM\IOSUBSYS
dg200pdr.files = 12

[DG200.Dev]
CopyFiles=dg200.files, dg200pdr.files
AddReg=dg200.addreg

[dg200.addreg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,DG200.SYS

; Indicate that the device uses the C/B/I protocol
[cbi.addreg.HW]
HKR,,DeviceProtocol,0x10001,00

; Indicate that the device uses the C/B protocol
[cb.addreg.HW]
HKR,,DeviceProtocol,0x10001,01

; Indicate that the device uses the BULK ONLY protocol
[bulkonly.addreg.HW]
HKR,,DeviceProtocol,0x10001,50

; Install the port driver
[DG200pdr.Dev]
AddReg=dg200pdr.addreg

[dg200pdr.addreg]
HKR,,DevLoader,,*ios
HKR,,PortDriver,,dg200.pdr



[dg200.files]
dg200.sys

[dg200pdr.files]
dg200.pdr

[SourceDisksNames]
1000 = "Camera Disk","",,

[SourceDisksFiles]
DG200.SYS = 1000
DG200.PDR = 1000

;---------------------------------------------------------------;

[Strings]
MSFT="BENQ"
MfgName="BENQ"
USB\VID_04A5&PID_3002.DeviceDesc="BENQ DC2110 Driver"
DG200\DISK.DeviceDesc="BENQ DC2110 Device Driver"