README.TXT Driver File Contents (SiS_LAN900_MS31004.zip)

            SiS PCI Fast Ethernet Adapter Installation
            ==========================================
                for Windows for Workgroups Driver
                =================================

driver file:  \wfw311\sisnic.386
INF file:     \wfw311\oemsetup.inf

Install The Driver
------------------

The following describes the procedure for installing the protected-mode
NDIS3 (sisnic.386) driver under Windows for Workgroups.

NOTE: It is assumed that Windows for Workgroups has already been installed.

1.  Start Windows.

2.  Open the "Network" group and double-click "Network Setup".

3.  To install the network adapter, click "Drivers..."

4.  In the "Network Drivers" window, click "Add Adapter..."

5.  From the list of network adapters, select "Unlisted or Updated Network
    Adapter".

6.  Network setup now requires a vendor-provided network driver diskette.
    Insert the "SiS PCI Fast Ethernet Adapter Drivers Disk" in drive A:,
    then Click OK.

7.  From the "Unlisted or Updated Network Adapter" screen, select

    "SiS 900 PCI Fast Ethernet Adapter"

    then click OK.

8.  Follow the rest screen instructions to complete the installation.

9.  When prompted, restart Windows.


Adapter Configuration
---------------------

The driver allows you to specify your network media type:

1.  Open the "Network" group.
2.  Double-click "Network Setup".
3.  Click "Drivers..."
4.  Choose the adapter you want to configure then click "Setup..."
5.  Click "Advanced..."
6.  Now, you can specify your network media type through the dropdown menu.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.29