1. TM4150_LAN.zip Driver
2. release.txt File Contents

release.txt Driver File Contents (TM4150_LAN.zip)

                          Broadcom Corporation
                          16215 Alton Parkway,
                          Irvine, CA 92619-7013
			  
                              Revision History
            Broadcom's Advanced Server Features Program For Netware
                               04/16/2004
                              Version 2.25


v2.25  (April 16, 2004)
=====================

   Fixes:
   ------
      Problem:  (CQ#9661) Gratuitus ARP Request contains broadcast
                address in ARP source HW MAC address field.

      Cause:    Novell Cluster software is not using the correct HW
                MAC address.

      Change:   Driver corrects source HW MAC address field of ARP 
                packet. 

      Impact: None.
 

v2.24  (Aug 21, 2003)
=====================

   Fixes:
   ------
   1. Problem: (CQ #7783) BASP Advanced Server Screen does not
               display MAC address properly

      Cause: Screen not updated when a NIC is bound and MAC addres
             becomes available.

      Change: Added call to update screen when needed.

      Impact: None.
      
   2. Problem: (CQ #8313) Jumbo frame example in readme.txt is incorrect

      Change: Updated readme.txt to show the correct usage of JUMBO
              parameter for b57.lan.

      Impact: None.
      
v2.23  (Aug 04, 2003)
=====================

   Fixes:
   ------
   1. Problem: (CQ #8183) BASP sends out arp packets using old IP
               address that has been unbound.

      Cause: No mechanism to delete cached arp entries.

      Change: Added function to delete all inbound arp entries whenever
              a protocol is unbound from basp.
	      
      Impact: None.

   2. Problem: (CQ #7782) Node address not supported by basp.
   
      Cause: Node address always taken from bound adapters.
      
      Change: Added console message to say that the node parameter is
              ignored.
	      
      Impact: None.

v2.22  (May 08, 2003)
=====================

   Enhancement:
   ------------
   1. Problem: (CQ #7357) BASP does not support Transmit failed, carrier
               sense missing counter

      Change: Added support for this counter by incrementing it whenever
              there is no bound adapter or when all of them are linked-
              down.

      Impact: No other side effects.

v2.21  (03/31/03)

- Fixed an abend problem when binding to an adapter. The bug was introduced
  in ver. 2.20.
  
v2.20  (03/27/03)

- Added code so that basp cannot bind to itself.
- Added code to update the MAC address for trunking and 802.3AD teams so that
  the current MAC address will be shown in monitor.
  
v2.19  (02/13/03)

- Fixed missing frame types from main screen by removing all frame types.


v2.18  (02/03/03)

- Added code to check and disallow NIC cards to be bound more than once
  using protocol bind.

v2.17  (01/07/03)

- Fixed version number.
- Fixed ldi file problem.

v2.15  (11/11/02)

- Fixed another bind problem.

v2.14  (11/01/02)

- Fixed abend during bind.

v2.13  (10/30/02)

- Added protocol registration in BASP to allow it to bind to NICs like
a protocol stack.

v2.12   (09/06/02)
-Fixed abend when binding more than one frame type.
-Fixed IPX failover failure using 3rd party BASP-aware NICs.

v2.11	(08/27/02)
-Fixed vlan problem when 3rd party drivers register.

v2.10	(04/05/02)
-Fixed failover problem that seldom occured in certain environments.

v2.09	(03/14/02)

- Added version & signature to structures for BMAPI.
- Using a new method to pass vlan support to drivers. 

v2.08   (12/20/01)

- Fixed some LACP bugs.
- Added jumbo frames support.

v2.07   (12/07/01)

- Added 802.3AD with LACP.

v2.05   (08/18/01)

- Fixed team member/non-team loading frame type bug.

v2.04   (07/16/01)

- Fixed multiple load/unload with multiple vlans problem.

v2.03   (07/06/01)

- Fixed Ipx bind problem introduced in 2.02.

v2.02   (07/03/01)

- Added universal vlan support for 3rd party cards.

v2.01   (06/26/01)

- Added better vlan support.

v2.00   (06/21/01)

- Fixed link up/down problems.	

v1.16  (05/07/01)

- Fixed problem in OEM .LDI file.

v1.15  (05/04/01)

- Added OEM strings.

v1.14  (02/15/01)

- Fixed the problem of receiving priority tagged frames.

v1.13  (01/25/01)

- Fixed a problem that arises when NIC drivers are loaded after BASP and
are subsequently bound. Also changed the recommended procedure to load
NIC drivers after BASP so that the link state can be determined without
delay.

v1.12  (01/19/01)

- Added 64 bit screen counters for tx/rx packet/byte counts.

v1.11  (12/29/00)

- Fixed a minor screen problem.

v1.10  (12/19/00)

- Added check to prevent BASP from unloading when NIC adapters are still
  bound in any VSLOT.

v1.09  (12/14/00)

- Fixed a menu problem under Netware 4.2 SMP.

v1.08  (11/30/00)

- Fixed a IPX failover problem with B57.LAN v1.00.

v1.07  (11/22/00)

- Fixed some screen counters.

v1.06c (11/21/00)

- Made BASP.LAN loadable in Netware 4.x.

v1.06b (11/16/00)

- Added TCP/UDP/IP checksum offload support.
- Fixed a minor VSLOT parameter problem and a screen problem.

v1.06  (10/31/00)

- Fixed problem #498 (Unable to unbind standby NICs).

v1.05c (10/30/00)

- Fixed the abend problem when B57 is unloaded with hot plug (#481).

v1.05b (10/28/00)

- Fixed the abend problem when a bound NIC is unloaded (#465).

v1.05 (10/27/00)

- Fixed the abend problem with Generic Trunking (#416).
- Fixed the ECB leak before the adapters establish link.
- Removed card add/delete from the GUI.

v1.04 (10/23/00)

- Implemented a new scheme to address IPX fail-over. This scheme only
  works on Tigon2 and Tigon3 cards. Requires Broadcom's ALT.LAN v2.05b or
  newer and B57.LAN v0.15 or newer.
- Resolved problems #361, #336, #341.

v1.03d (10/16/00)

- Further improved the fail-over scheme (problem #318).
- Fixed a problem in trunking mode where ARP packets are using the wrong
  physical address (problems #322, #323).
- Add text in section VLANS sub-section 3 this file to clarify BIND BASP for
the first VLAN. (OEM DFCT22165).
  
v1.03c (10/11/00)

- Improved the new fail-over scheme.
- Fixed a problem in Alteon's Tigon2 driver. Use ALT.LAN v2.04d or newer.
- Resolved problems #221, #285, #300, #295

v1.03b (10/06/00)

- Added outbound IPX load-balancing and fail-over.
- Added VLAN support for B57.LAN.
- Resolved problems #211, #221, #244, #281, #282.

v1.03a (10/05/00)

- Added IPX fail-over. (Partially working for NT clients only)
- Fixed some screen problems with VLANs.
- Resolved Problem #105.
- Resolved Problem #189.
- Resolved Problem #191.

v1.02 (08/31/00)

- Increased to a maximum of 64 VLANs.
- Fixed a problem that hangs MP machines when cables are disconnected.
- Fixed some screen problems.

v1.01 (08/24/00)

- Fixed problem with multiple VLANs.
- Fixed some screen problems.

v1.00 (08/22/00)

- Revised VLAN scheme to work with ALT.LAN v2.04.
- Added Generic Trunking.
- Enhanced the menu interface.

v0.09 (08/03/00)

- Tested and debugged GVRP code.
- Fixed the problem of adding and deleting multicast addresses with VLANs.
- Added NWSNUT.NLM module dependency.

v0.08 (08/01/00)

- Changed name to BASP.LAN.
- Fixed the problem of over-allocating receive buffers.
- Increased MSMTxFreeCount.
- Fixed the problem of crashing when NESL events are generated by some
  3rd party NIC cards.
- Released basp4x.lan for Netware 4.x with no screen functions.

v0.07 (07/18/00)

- Fixed the problem of failing to switch traffic back to the primary
  from the hot-standby when the primary recovers.

v0.06 (07/12/00)

- Fixed the problem of sometimes not releasing ECBs during unload.