SiS 900/7016 PCI Fast Ethernet Adapter Installation for NetWare DOS ODI Driver (1) Installation from CD ROM ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1. Please make sure CD ROM player work fine under DOS environment. 2. Run INSTALL.BAT and press any key to accept the agreement. 3. Select "Client Installation". 4. Select "NetWare DOS/WINDOWS Client (VLM)". 5. Specify your target directory, default path is C:\NWCLIENT. 6. Allow system to modified your AUTOEXEC.BAT and CONFIG.SYS. 7. Select YES to install support for MS Windows, if you accept. 8. Move the highlight bar to Select the driver for your network board and press <Enter>. 9. Put the released diskette into floppy disk and go to bottom Select "OTHER DRIVERS" under Network Board. 10.Please insert SiS PCI Fast Ethernet adapter driver diskette into floppy disk. 11.Specify the full path of ODI for DOS driver, Ex: A:\NWCLIENT. 12.Select "SiS 900/7016 PCI Fast Ethernet". 13.Move to "Highlight here and press <Enter> to install". 14.Press <Enter> after you configure correctly, then installation will copy necessary file to your hard disk. 15.Restart your system and connect to NetWare server. (2) Manual Installation ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ? 1. Assume you have installed NetWare Client for DOS system. 2. Copy SIS900.COM file from SiS PCI Fast Ethernet driver diskette into the NetWare client directory containing LSL.COM, IPXODI.COM, NETx.COM or VLM.COM, VLM files. 3. Modify startup batch file -- STARTNET.BAT: Content of STARTNET.BAT ----------------------- SET NWLANGUAGE=English C:\NWCLIENT\LSL.COM C:\NWCLIENT\SIS900.COM C:\NWCLIENT\IPXODI.COM C:\NWCLIENT\VLM.EXE F: LOGIN XXXX Content of NET.CFG ------------------ Link Driver SIS900 FRAME ETHERNET_802.2 FRAME ETHERNET_802.3 FRAME ETHERNET_II FRAME ETHERNET_SNAP (3) Installation from Diskettes ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1. Creat Diskettes for installation from CD ROM 2. Run INSTALL program and press any key to accept the agreement. 3. Please reference above "Installation from CD ROM". (4) Set Media Type ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ 1. Default is Auto-detect. 2. Force media type. Modify Net.cfg Link Driver SIS900 Mediatype Type FRAME ETHERNET_802.2 FRAME ETHERNET_802.3 FRAME ETHERNET_II FRAME ETHERNET_SNAP Type Ethernet Standard Duplex -------- ----------------- ------ AUTO auto-detect Auto UTP 10BASE-T Half UTPFULL 10BASE-T Full FAST 100BASE-T Half FASTFULL 100BASE-T FullDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.