postcode.txt Driver File Contents (AS1680TM4KWinflash.zip)

// Progress report codes for debug port

#define DONE_START                  0  // Start with 00
#define DONE_CMDLINE                1  // Command line parsed
#define DONE_VIDEOINIT1             2  // Video init after command line parse
#define DONE_INIREAD                3  // PLATFORM.BIN read in
#define DONE_VIDEOINIT2             4  // Video init after reading PLATFORM.BIN
#define DONE_INICHECK               5  // Interface format and part ID checked
#define DONE_BAKFIRST               6  // About to fetch first 64k to backup
#define DONE_BAKNEXT                7  // About to save next 64k
#define DONE_BAKDONE                8  // Written last 64k block
#define DONE_EMSCHECK               9  // Verified that no memory managers
#define DONE_BIGREAL                10 // Big Real mode selected
#define DONE_ROMBLOCK               11 // Another block of BIOS.ROM read in
#define DONE_ROMREAD                12 // All of BIOS.ROM read in
#define DONE_INTSOFF                13 // Interrupts turned off
#define DONE_PLATFORM               14 // Platform initialized
#define DONE_PARTID                 15 // Flash memory part identified
#define DONE_SAVE                   16 // About to save a block
#define DONE_SAVED                  17 // Block saved
#define DONE_RESTORE                18 // About to restore a saved block
#define DONE_RESTORED               19 // Block restored
#define DONE_ZEROING                20 // Ready to zero another block
#define DONE_ZEROED                 21 // Block was zeroed
#define DONE_ERASING                22 // Ready to erase another block
#define DONE_ERASED                 23 // Block was erased
#define DONE_PROGRAM                24 // Ready to program another block
#define DONE_PROGRAMMED             25 // Block was programmed
#define DONE_VERIFY                 26 // About to compare flashed block with file
#define DONE_VERIFIED               27 // Verification was completed
#define DONE_GETSTATUS              28 // Waiting for flash prog/erase to COMPLETE
// MUST MATCH MEMORY.ASM EQUATES
#define DONE_FLASHED                29 // Flashing of all blocks completed
#define DONE_PLATFORMOF             30 // Platform dependent termination done
#define DONE_EXIT                   31 // Ready to exit(0) without rebooting
#define DONE_EXIT2                  32 // Return from Reboot Routine
#define DONE_BOOTING                -1 // Finish with FF
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.87