Setting up Intel PRO/100 Drivers for RIS Installation ====================================================== To set up network drivers for RIS installation, you need to copy files to two locations (from the root of the RIS image, which we will refer to as [IMAGE_ROOT]). 1. Copy all the files from the PRO100\WS03XP2K (Windows 2000, Windows XP & Server 2003) directory to the [IMAGE_ROOT]\$oem$\$1\Drivers\NIC directory. This directory is specified by a line in the .SIF file that is located in the [IMAGE_ROOT]\I386\Templates directory. 2. Copy all .SYS files from the directory mentioned above to the [IMAGE_ROOT]\i386 directory. 3. Extract the appropriate zipped INF file located in the PRO100\WS03XP32\RIS_INF directory (E100BNT5.ZIP for Windows 2000 or E100B325.ZIP for Windows XP & Server 2003) and copy that INF to the [IMAGE_ROOT]\i386 directory. Do not copy the INF files at the root of the PRO100\WS03XP32 directory to this location. 4. Once these steps are complete, restart the Boot Information Negotiation Layer service (Windows 2000) or the Remote Installation Service (XP & Windows Server 2003). 5. Follow the rest of the Microsoft instructions for adding a new network driver to the RIS installation.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.