+==============================================================================+ | MODEL NO. : EFL50 RELEASE DATE : 10/11/2005 | |------------------------------------------------------------------------------| | Major Version : 2.10 CPU u-code Version: | | KBC BIOS Version : 2.00 A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50210.ROM -> 47C5 | | UMA.ROM -> F600 (C=190/200,213/222) | | M24P.ROM -> 372E (C=398,M=276) | | M26P.ROM -> 09A3 (C=358,M=330) | +==============================================================================+ System bios: 1. Modify Realtek clockgen registers. +==============================================================================+ | MODEL NO. : EFL50 RELEASE DATE : 10/03/2005 | |------------------------------------------------------------------------------| | Major Version : 2.00 CPU u-code Version: | | KBC BIOS Version : 2.00 A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50200.ROM -> B5C5 | | UMA.ROM -> 6400 (C=190/200,213/222) | | M24P.ROM -> A52E (C=398,M=276) | | M26P.ROM -> 77A3 (C=358,M=330) | +==============================================================================+ System bios: 1. Implement ACER W-cable function. 2. Solved Display error on M26P with hardDrive Password. EC bios: 1. Modify battery parameter. +==============================================================================+ | MODEL NO. : EFL50<Mimid-P> RELEASE DATE : 09/12/2005 | |------------------------------------------------------------------------------| | Major Version : 1.20P CPU u-code Version: | | KBC BIOS Version : 1.20P A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50120P.ROM -> 82C5 | | UMA.ROM -> 3100 (C=190/200,213/222) | | M24P.ROM -> 722E (C=398,M=276) | | M26P.ROM -> 44A3 (C=358,M=330) | +==============================================================================+ System bios: 1. Fixed fail boot with error code 02/06h. 2. Support ENE1410. EC bios: 1. Modify Fn+F6 function to solve the issue "Fn+F6 sometimes fails". +==============================================================================+ | MODEL NO. : EFL50<Mimid-P> RELEASE DATE : 09/02/2005 | |------------------------------------------------------------------------------| | Major Version : 1.10P CPU u-code Version: | | KBC BIOS Version : 1.10P A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50110P.ROM -> 68FC | | UMA.ROM -> 2000 (C=190/200,213/222) | | M24P.ROM -> 4E99 (C=398,M=276) | | M26P.ROM -> EC35 (C=358,M=330) | +==============================================================================+ System bios: 1. Implement Docking legacy usb support. 2. Implement ENE Workaround.(fixed "bobo" sound during post time) +==============================================================================+ | MODEL NO. : EFL50<Mimid-P> RELEASE DATE : 08/19/2005 | |------------------------------------------------------------------------------| | Major Version : 1.00P CPU u-code Version: | | KBC BIOS Version : 1.00P A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50100P.ROM -> ECC5 | | UMA.ROM -> 9B00 (C=190/200,213/222) | | M24P.ROM -> DC2E (C=398,M=276) | | M26P.ROM -> AEA3 (C=358,M=330) | +==============================================================================+ System bios: 1. Improve "BOBO" sound during post time. +==============================================================================+ | MODEL NO. : EFL50<Mimid-P> RELEASE DATE : 08/16/2005 | |------------------------------------------------------------------------------| | Major Version : 0.08P CPU u-code Version: | | KBC BIOS Version : 0.08 A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50008P.ROM -> D3FC | | UMA.ROM -> 8B00 (C=190/200,213/222) | | M24P.ROM -> B999 (C=398,M=276) | | M26P.ROM -> 5735 (C=358,M=330) | +==============================================================================+ System bios: 1. Fixed Docking 1394 can't work after s4 resume. 2. Fixed Docking modem can't work after s4 resume. 3. Fixed LCD Panel signal abnormal when plug-in EXT. CRT. 4. Solved PXE couldn't boot. 5. Solved cool boot long run test fail. 6. can't undock at start menu after resume from s4, system hang up. EC bios: Modified: 1. Disable PS/2 polling empty port before enters and enable PS/2 polling empty port after resume. 2. Modify battery parameter for 3 cells. Add function: 1. Switch external mouse to internal touchpad when S/W undock. P.S. But the function is not enable yet. +==============================================================================+ | MODEL NO. : EFL50<Mimid-P> RELEASE DATE : 08/10/2005 | |------------------------------------------------------------------------------| | Major Version : 0.07P CPU u-code Version: | | KBC BIOS Version : 0.07 A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50006P.ROM -> 9CFC | | UMA.ROM -> F800 (C=190/200,213/222) | | M24P.ROM -> 392E (C=398,M=276) | | M26P.ROM -> 0BA3 (C=358,M=330) | +==============================================================================+ System bios: 1. Change support maximum memory to 2G in esetting. 2. Add the svid/ssid of 1394 and cardbus on docking. 3. Fixed COM & LPT report of Docking Device. 4. Fixed black screen after s3 resume for ATI VGA. 5. <Docking>USB keyboard and mouse couldn¡¦t work fine after resume from S4. 6. <Docking>USB 2.0 HDD (Oxford Semiconductor Ltd) couldn¡¦t work fine after resume from S4. 7. <Docking>1394 NIC couldn¡¦t work fine after resume from S4. 8. <Docking>1394 Device couldn¡¦t work fine after resume from S4. 9. <Docking>Modem couldn¡¦t work fine after resume from S4. 10. Fixed warm boot from windows, turn off power of HDD. 11. Modify OEM ID "Compal" to "Acer" EC bios: 1. Keep the PS/2 port status and set it to FIX mode before enters S3 and release the FIX mode after resume. +==============================================================================+ | MODEL NO. : EFL50<Mimid-P> RELEASE DATE : 07/26/2005 | |------------------------------------------------------------------------------| | Major Version : 0.06P CPU u-code Version: | | KBC BIOS Version : 0.06 A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50006P.ROM -> 9CFC | | UMA.ROM -> 5400 (C=190/200,213/222) | | M24P.ROM -> 8299 (C=398,M=276) | | M26P.ROM -> 2035 (C=358,M=330) | +==============================================================================+ System bios: 1. Fixed "disable FIR" and then boot from windows will cause system hang in waiting bar for Docking. 2. Change the memory type from "DDR" to "DDRII" for ACER esetting. 3. Fixed ps2 mouse crazy on DOS mode. 4. Fixed USB mouse on Docking not work problem. 5. Fixed USB on Docking not work after restart in windows. 6. Support USB floppy device boot on Docking. For Win2000 1. The system is busy after resume from s3.(Win2K) 2. Hot plug in dock cause system blue screen.(Win2K) 3. Fixed high usage issue.(Win2K) 4. Fixed Com port can't work.(Win2K) 5. Fixed card bus of dock is yollow mark. (Win2K) 6. PCMCIA memory card fail on interal Card bus. (Win2K) 7. Fixed the modem SSID&SVID is wrong.(Win2K) EC bios: Fixed: 1. [MiCIC001] Dock the unit, Keyboard and Touchpad are no function. Total:5 units, Fail:2 units 2. [MiCIC018] S3 long run test:Suspend paused,K/B and T/P no function,detail s attchment picture. 3. [MiCIC030] Run S3, system hang up, K/B and T/P no funtion. 4. [MiCIC034] PMU test: resume from S3, K/B T/P often no function. Modified: 1. Disable PS2 hot pulg ability and poiting feature before turn off VS power and enable it after turn on VS power. +==============================================================================+ | MODEL NO. : EFL50<Mimid-P> RELEASE DATE : 07/21/2005 | |------------------------------------------------------------------------------| | Major Version : 0.05P CPU u-code Version: | | KBC BIOS Version : 0.05 A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50005P.ROM -> ADFC | | UMA.ROM -> 6500 (C=190/200,213/222) | | M24P.ROM -> 9399 (C=398,M=276) | | M26P.ROM -> 3135 (C=358,M=330) | +==============================================================================+ System bios: 1. Modify Alt+ F10 hot key function for sometime will show D2D screen. EC bios: 1. Modify PS2 config setting to solve K/B & T/P lock issue. 2. Modify battery parameter to support 3 cells battery. 3. Add a work-around "send 0xAA00 when plug/unplug external PS2." +==============================================================================+ | MODEL NO. : EFL50<Mimid-P> RELEASE DATE : 07/13/2005 | |------------------------------------------------------------------------------| | Major Version : 0.04P CPU u-code Version: | | KBC BIOS Version : 1.30 A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50004P.ROM -> 26FC | | UMA.ROM -> DE00 (C=190/200,213/222) | | M24P.ROM -> 0C99 (C=398,M=276) | | M26P.ROM -> AA35 (C=358,M=330) | +==============================================================================+ System bios: 1. Fix Speedstep function fail by AC mode in win2K. 2. Solved plug in docking during post will cause system hang up in windows logo. 3. Dock in S4 mode then resume from s4, No "Undock Computer" item in windows start menu. EC bios: 1. Modify fan trip point for TJ85 CPU. +==============================================================================+ | MODEL NO. : EFL50<Mimid-P> RELEASE DATE : 06/28/2005 | |------------------------------------------------------------------------------| | Major Version : 0.03P CPU u-code Version: | | KBC BIOS Version : 1.20 A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50003P.ROM -> C2FC | | UMA.ROM -> 7A00 (C=190/200,213/222) | | M24P.ROM -> A899 (C=398,M=276) | | M26P.ROM -> 4635 (C=358,M=330) | +==============================================================================+ System bios: 1. Fix incorrect information of ATI V-RAM size showing in SCU. 2. Fixed New card can't be detect after warm boot. EC bios: N/A +==============================================================================+ | MODEL NO. : EFL50<Mimid-P> RELEASE DATE : 06/21/2005 | |------------------------------------------------------------------------------| | Major Version : 0.02P CPU u-code Version: | | KBC BIOS Version : 1.20 A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50002P.ROM -> 8DFC | | UMA.ROM -> 4500 (C=190/200,213/222) | | M24P.ROM -> 7399 (C=398,M=276) | | M26P.ROM -> 1135 (C=358,M=330) | +==============================================================================+ System bios: 1. Update ATI new VBIOS for hynix RAM Performance and enable DFP support. 2. Fixed when uninstall launch manager the Fn+F5 doesn't work in windows mode. 3. Fixed If plug in USB Joystick to post, the system always beep on Dos mode. 4. Fixed Docking USB keyboard doesn't work in dos mode and remove CPPMOEM folder for USB core size. 5. Fixed alt+F10 function fail. EC bios: N/A +==============================================================================+ | MODEL NO. : EFL50<Mimid-P> RELEASE DATE : 06/07/2005 | |------------------------------------------------------------------------------| | Major Version : 0.01P CPU u-code Version: | | KBC BIOS Version : 1.20 A1 M206D109 (Dothan) | | VGA BIOS : ATI M24P: 008.020M.073.000 A2 M206D210 (Dothan) | | ATI M26P: 009.010.002.006 B1 M206D617 (Dothan) | | IntelVGA: 1219 C0 M206D820 (Dothan) | | B1 M8069545 (Celeron M) | | Flash Utility Ver.: 0.12 | | Flashchk Version : 1.90 | | Checksum (ROM) : FL50001P.ROM -> 8C7D | | UMA.ROM -> 2F00 (C=190/200,213/222) | | M24P.ROM -> 5D99 (C=398,M=276) | | M26P.ROM -> 1FA6 (C=358,M=330) | +==============================================================================+ System bios: 1. Fix RCD blue screen in recover step. EC bios: 1. Disable "battery capacity under 5%, CPU throttling" function. 2. Modify docking function. 3. Keep BlueTooth's power status when enter/resume from S3. 4. Wireless default enable when turn on system.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.