//////////////////////////////////////////////////////////////////////
// //
// UDMA Support Level Revising Utility for fujitsu drive. //
// (PB13,14,15(H) / HN12,13) Firmware Dev#2, IDE1 pj. H.Iima //
// Copyright(C) FUJITSU Ltd. 1999-2000, All rights reserved. //
// //
//////////////////////////////////////////////////////////////////////
Version 1.14 Feb 23, 2000
Added Primary/Secondary with Master/Slave selective Option.
In the system area, a switch information is provided in order to
enable or disable UDMA Mode-4 (66.7MB/s) feature.
The "UDMA66.bat"and "UDMA33.bat" can revise switch information
data in Fujitsu hard disk drive. (PB13/13H,PB14/14H,PB15/15H,
HN12/12L and HN13/13L)
Usage : A:\>UDMA33
or
A:\>UDMA66
;----------------------------------------------------------------
1) Connect target drive to ATA bus.
2) Turn on drive power and PC by MS-DOS FDD.
3) To start this tool, type following filename at command prompt.
A:\>UDMA33 (for ULtra DMA33 mode setting)
or
A:\>UDMA66 (for Ultra DMA66 mode setting)
4) After that, program runs automatically.
This tool is checking the HDD model from Identify information.
If other drive is connected, error message is displayed.
F/W Rev. :
Model Number :
< ERROR > Unexpected drive is connected on ATA bus.
5) If the following message appears, UDMA support level is
revised as your intend.
F/W Rev. : Dx-xx-xx
Model Number : FUJITSU MPxxxxxAx
Current Setting : UDMA Mode-4 66.7MB/s is ENABLED.
>>>>>>>>>>>>>>>>> UDMA Mode-4 66.7MB/s is DISABLED.
Program Complete. OK."
6) Turn off drive power.
New setting will be valid after power off -> on.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.