1. 510.exe Driver
2. Read Me First.txt File Contents

Read Me First.txt Driver File Contents (510.exe)

GRDVL510/512/815/817/915-GRDVM75-GRDV2000-GRDVP3 drivers installation steps:

After you clicked on the 510.exe file it unzipped all files into new folder called JVC in your C:\ drive. 

1.	Turn camera on (PLAY and memory mode) and connect USB cord between camera and your computer.
2.	If your PC is equipped with multiple USB ports it is recommended to use ports located on the back of the computer (connecting thru USB hub, front ports or additional devices like keyboard may prevent proper camera installation/operation).
3.	Camera monitor MUST display USB MODE screen.
4.	Your PC will display several screens (depending on which Windows 98/ME/2000/XP you use).
5.	Follow those screens and click on confirmation buttons if asked to.
6.	In one of the screens computer will ask about location of driver files. This can be manifested by screen: COPY MANUFACTURERS FILES FROM: or HAVE DISK lines depending which Windows version you are using. In this screen you must point to location: C:\JVC and then continue, until FINISH button is shown. 
7.	Installation is complete.


Troubleshooting tips in case of operation problems:  
·	Try different USB ports if available
·	Disconnect other USB devices if any
·	Reboot computer
·	If you have any NETWORK DRIVES shown in MY COMPUTER disconnect those.