National Datacomm Co., Ltd. NetWare 32-bit ODI Driver Installation ======================================= Copyright (C) 1998 by National Datacomm Co., Ltd. All rights reserved. NetWare Client32 Driver Installation ========================================================= Requirements: ------------- README.TXT fe100a.LAN fe100a.INF fe100a.LDI Driver Installation for DOS32 ========================================================= 1. If you have completed installed the Netware Client 32 for DOS, all you have to do is to modify STARTNET.BAT. Please see the sample STARTNET.BAT below the installation instructions. 2. Run INSTALL.EXE from Netware DOS 32 diskette 1 (or from Netware 4.11 CD). Select "Client Instalation" in "Select the type of installation desired" window. Then select "Netware Client32 for DOS and Windows 3.1x" in "Select client to be installed" windows. When the product manual appears, mark the "Netware Client 32 for DOS" item, then press <Enter>. 3. Select "USER SPECIFIED 32 BIT DRIVER" item from "32-bit Network Board Drivers" menu, then press <Enter>. 4. Insert NDC Fast Ethernet Adapter Driver Diskette into your floppy diskette drive, then specify the driver path like A:\C32 or B:\C32. 5. Select "NDC 10/100 Fast Ethernet PCI Adapter Driver", then press <Enter>. 6. Set the correct driver parameters to comply with your network environment, then press <F10> to continue. 7. Following instructions to complete the Client32 for DOS software installation. 8. Reboot your machine. Sample STARTNET.BAT for DOS32. ============================== SET NWLANGUAGE=ENGLISH C:\NOVELL\CLIENT32\NIOS.EXE LOAD C:\NOVELL\CLIENT32\LSLC32.NLM LOAD C:\NOVELL\CLIENT32\CMSM.NLM LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM LOAD C:\NOVELL\CLIENT32\FE100A.LAN FRAME=ETHERNET_802.2 LOAD C:\NOVELL\CLIENT32\FE100A.LAN FRAME=ETHERNET_802.3 LOAD C:\NOVELL\CLIENT32\FE100A.LAN FRAME=ETHERNET_II LOAD C:\NOVELL\CLIENT32\FE100A.LAN FRAME=ETHERNET_SNAP LOAD C:\NOVELL\CLIENT32\IPX.NLM LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM Driver Installation for Microsoft Windows 3.x ========================================================= Please refer to "Driver Installation for DOS32", in step 2, mark "Netware Client 32 for DOS" and "Client 32 for Windows", then following step 3..8 to complete the installation. Driver Installation for Microsoft Windows 95 ========================================================= If you have installed the Microsoft Client in your Windows 95 system, you should remove the adapter object and NDIS 2/3 driver from Windows 95 system. Install Novell's files for Client32 drivers: 1) Remove adapter object & driver in Network control panel. 2) Run INSTALL.EXE from Netware DOS 32 diskette 1 (or from Netware 4.11 CD). Select "Client Instalation" in "Select the type of installation desired" window. Then select "Netware Client32 for Windows 95" in "Select client to be installed" windows. 3) Following Novell's instructions to complete. Note: Don't install the network card at this time! 4) Shutdown and turn off the machine. Install NDC Fast Ethernet Adapter Client32 driver: 1) Plug NDC Fast Ethernet Adapter into one of the Master PCI slots of your PCI platform. 2) Turn power on then boot from Windows 95. 3) Windows 95 will prompt PCI Ethernet Controller in New Hardware Found dialog box. 4) Select driver from disk provided by hardware manufacturer, and click OK. 5) Following instructions to complete the installation. Note: Windows 95 will ask you to keyin the proper path of the following diskette: a) NDC Fast Ethernet Adapter Driver Diskette --> Insert NDC 10/100 Fast Ethernet PCI Adapter Driver Diskette, then, assign the path to A:\C32 b) Netware Client 32 for Windows 95 Disk c) Windows 95 CD-ROM NetWare DOS ODI Server Driver Installation (NetWare 4.11) ========================================================= FE100A.LAN can be used as a NetWare 4.11 server driver. 1. At the NetWare prompt (indicated by the Server name), run the INSTALL.NLM program by typing: server name: LOAD INSTALL <Enter> 2. Select "Maintenance/Selective Install" and press <Enter>. 3. Select "LAN Driver Options (Configure/Load/...)" and press <Enter>. 4. Press the <Ins> key to specify other drivers to install. 5. Press <F3> and specify the driver path (A:\NW4XX) and press <Enter>. 6. The FE100A.LAN driver should appear in your choice list for the 'Select a LAN Driver' field. Choose this driver to start the driver loading and binding procedure. This will allow you to load and bind all 4 frame types supported by NetWare. 7. Next time you start up your system, simply follow steps 1 to 3 to complete the installation.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.