Version.txt Driver File Contents (ctdf4.05.1010b_11_2.zip)

Prodif T 2496(TM) Driver Version History

Version 4.05.1010b (2003-09-03): [beta test release]
1. Add .INF file for Windows XP installation. ***BETA***
Note: this driver requires firmware version 1.02.0015 or later.

Version 4.05.1010 (2000-12-07):
1. Change product name to Prodif T 2496.
Note: this driver requires firmware version 1.02.0015 or later.

Version 4.05.1009 (2000-03-31):
1. Default to last configured clock source when initializing driver.
2. Ensure WavSync works when master card isn't streaming audio.
3. Update help file.
Note: this driver requires firmware version 1.02.0015 or later.

Version 4.05.1008 (2000-02-24): [pre-release version]
1. Ensure driver thread starts before returning from open.
2. Allow user to forcibly close driver.
3. Properly recover from driver thread startup/shutdown failure.
4. Clean up configuration dialog.
Note: this driver requires firmware version 1.02.0015 or later.

Version 4.05.1007 (2000-02-15): [pre-release version]
1. Report error when trying to clock master at unsupported sample rate.
2. Support chase mode with multiple cards.
3. Add support for AudioX transport control (release pending; requires AudioX 1.1).
4. Fix bugs in suspend/resume processing.
5. Add Windows NT driver.
Note: this driver requires firmware version 1.02.0015 or later.

Version 4.05.1006 (2000-01-26): [beta test release]
1. Add transport control applet and associated setup program.
Note: this driver requires firmware version 1.02.0015 or later.

Version 4.05.1005 (2000-01-03): [alpha test release]
1. Fix record enable bug.
2. Implement chase and lock to tape decks.
3. Add ASIO and EASI driver buffer size settings to config dialog.
Note: this driver requires firmware version 1.02.0015 or later.

Version 4.05.1004 (1999-12-15): [internal/developer release only]
1. Disallow opening new device instances when DMA is enabled.
2. Update ASIO driver with latest bugfixes and remove BETA designation.
3. Update wave/kernel drivers with latest reference driver bugfixes.
4. Support new firmware.
Note: this driver requires firmware version 1.02.0015 or later.

Version 4.05.1003 (1999-09-29): [internal/developer release only]
1. Build using standard build tools.

Version 4.05.1002 (1999-09-28): [internal release only]
1. Implement full DMA controller support.
2. Fix serial communication driver buffer overrun.
3. Update ASIO driver with latest bugfixes.

Version 4.05.1001 (1999-08-23): [internal release only]
1. Support final hardware register layout.

Version 4.05.1000 (1999-08-19): [internal/developer release only]
Original driver release.
Please see the file "ReadMe.txt" for more details.



Prodif T 2496(TM) Firmware Version History

Version 1.02.0024, PCI Rev 002 (2000-03-31):
Updated firmware for rev A and rev C Prodif T 2496(TM).
1. Fix timing problem when starting playback.
2. Ensure multiple cards don't start playback before all cards are ready.
Note: this firmware requires driver version 4.05.1004 or later.

Version 1.02.0020, PCI Rev 002 (2000-03-07):
Updated firmware for rev A and rev C Prodif T 2496(TM).
1. Change clock doubler routing constraints to ensure correct route.
Note: this firmware requires driver version 4.05.1004 or later.

Version 1.02.0019, PCI Rev 002 (2000-02-23):
Updated firmware for rev A Prodif T 2496(TM).
Original firmware for rev C Prodif T 2496(TM).
1. Use rev A/C compatible routing for timecode driver.
2. Remove extra synchronization stage from DTRS mode byte.
3. Extend DMA one frame to allow for DA-xx crossfade at punch-out point.
Note: this firmware requires driver version 4.05.1004 or later.

Version 1.02.0018, PCI Rev 002 (2000-02-02):
Updated firmware for rev A Prodif T 2496(TM).
1. Fix clock mastering.
2. Be timecode master only when not slave to DTRS clock.
3. Ensure zero data when paused.
4. Fix glitches in timecode generator.
5. Fix multi-card WavSync(TM).
Note: this firmware requires driver version 4.05.1004 or later.

Version 1.02.0015, PCI Rev 002 (1999-12-17):
Updated firmware for rev A Prodif T 2496(TM).
1. Add timecode support.
2. Reorganize hardware register layout to facilitate routing.
Note: this firmware requires driver version 4.05.1004 or later.

Version 1.01.0008, PCI Rev 001 (1999-10-07):
Original firmware release for rev A Prodif T 2496(TM).



Prodif T 2496 is a trademark of SEK'D Vertrieb GmbH.
TDIF 2496 Pro and WavSync are trademarks of Digital Audio Labs, Inc.
Windows and Windows NT are registered trademarks of Microsoft Corporation.
DirectSound and DirectX are trademarks of Microsoft Corporation.
ASIO is a trademark of Steinberg Soft- & Hardware GmbH.
AudioX is a trademark of Twelve Tone Systems, Inc.
EASI is a trademark of Emagic Soft- & Hardware GmbH.
All other trademarks are property of their respective holders.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.32