; Protocol.ini section for the Broadcom Gigabit Ethernet BCM570x NetXtreme [B57] DriverName = "B57$" ; BusNum from 0 to 255 ; BusNum = ; DevNum from 0 to 31 ; DevNum = ; PortNum or FuncNum from 0 to 7 ; PortNum = ; FuncNum = ; LinSpeed can be set to 10, 100, or 1000 ; LineSpeed = ; Duplex can be set to half or full. LineSpeed is required when this keyword is used. ; Duplex = ; NodeAddress specifies the network address used. ; NodeAddress = ; FullSize sets driver in "Full Size" mode where the driver will use additional of 48KB. ; Not applicable for 5705, 5901, and 5788. ; FullSize ; NoTagStatus sets driver NOT to utilize the default method Tag Status of handling ; interrupts for none 5700 NIC. ; NoTagStatus ; ; To add more adapter(up to 4) repeat the below entry, where n can be from 2 to 4. ; ;[B57_n] ; DriverName = "B57n$" ; BusNum = ; DevNum = ; PortNum = ; FuncNum = ; LineSpeed = ; Duplex = ; NodeAddress = ; FullSize ; NoTagStatusDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.