ASPI Programs ASPIDL.EXE Download Microcode CHGDEF.EXE Change Definition on Allegro and PB7 CHGDEFBL.EXE Change Definition on PB7 for 900 Series Bus Logic CHGMS.EXE Change Mode Parameters CHKMS.EXE Check Mode Parameters READDEF.EXE Read Defect data READROM.EXE Read PB7 Boot ROM Version and date All of the above programs will access all drives on the ASPI Controller if no command line parameters are given. A drive ID's may be specified on the command line, i.e.: READROM 2 - will read the ROM Version for Target ID 2 only. A question mark (?) on the command line will display a help screen. The programs defined for the Allegro and PB7 will only work on these two drives. The other programs should work with any drive attached to an ASPI controller with the ASPI drivers loaded. The ASPI download program is for any Fujitsu drive that has download microcode except Super Humming.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.