; -----------------------------------------------------------------------
; OEMSETUP file for ATTO ExpresIP Network Driver.
; -----------------------------------------------------------------------
;
; OS: Windows NT Version 4.0
; Platform type: Intel x86
;
; Supported adapters:
; -------------------
; ATTO ExpresFC Fibre Channel Adapters
;
; Usage:
;
; This file is used for the installation/configuration/deinstallation
; procedure of ExpresIP network driver for Windows NT.
;
;------------------------------------------------------------------------
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCI
[Options]
ExpresIP
[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\drivers\expresip.sys"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "ATTO"
ProductMajorVersion = "1"
ProductMinorVersion = "0"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "ExpresIP"
ProductSoftwareImagePath = "%SystemRoot%\System32\drivers\expresip.sys"
NetRuleSoftwareType = "ExpresIPSys ndisDriver ExpresIPDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """ExpresIPSys"" yes no container"
NetRuleSoftwareClass = {"ExpresIPDriver basic"}
NetRuleSoftwareBindable = {"ExpresIPDriver ExpresIPAdapter non exclusive 100"}
ProductHardwareName = "ExpresIP"
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
FunctionTitle = "ATTO ExpresIP Network Driver Setup"
ProductSoftwareDescription = "ATTO ExpresIP Network Driver"
ProductSoftwareTitle = "ATTO ExpresIP Network Driver"
ProductHardwareExpresIPTitle = "ATTO ExpresIP Network Driver"
ProductHardwareExpresIPDescription = "ATTO ExpresIP Network Driver"
NetRuleHardwareExpresIPType = "ExpresIP ExpresIPAdapter"
NetRuleHardwareExpresIPClass = {"ExpresIPAdapter basic"}
AdapterExpresIPType = 5 ;; PCI board
ExpresIPCFIDList = {8704, 8960} ;; 0x2200, 0x2300
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
NT350VersionConstant = "3.50"
NT310VersionConstant = "3.10"
CardName = "ExpresIP"
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
;;;
;;; Change "Set !G:DebugOutputControl=0" to 1 in NCAPSHEL.INF for debug support.
;;;
;;; set !G:DebugOutputControl=1 ;; Debug output {1=turned on, 0= turned off}
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(Function$(Option)Title)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
;;
;; Get the Version of Windows NT we are installing on. This will allow us to use the
;; PCI Support that will be included in NT v3.51
;;
set CurrentVersionValue = ""
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
Ifstr(i) $(KeyNt) != ""
GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
Debug-Output "$(InfFile) $(Option): WinNT CurrentVersion ="$(CurrentVersionValue)
CloseRegKey $(KeyNt)
Endif
ifstr(i) (*($(CurrentVersionValue),4)) == $(NT310VersionConstant) ;; NT v3.10 not supported!
Debug-Output "$(InfFile) $(Option): Configureadapter"
set Error = "Windows NT v3.10 is not support by this product"
goto fatal
endif
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
else-Ifstr(i) $(!NTN_InstallMode) == configure
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
else
set StartLabel = configureadapter
endif
else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
Debug-Output "$(InfFile) $(Option): =================================================="
Debug-Output "$(InfFile) $(Option): STF_CWDIR is: "$(!STF_CWDIR)
Debug-Output "$(InfFile) $(Option): STF_SRCDIR is: "$(!STF_SRCDIR)
Debug-Output "$(InfFile) $(Option): STF_LANGUAGE is: "$(!STF_LANGUAGE)
Debug-Output "$(InfFile) $(Option): Option is: "$(Option)
Debug-Output "$(InfFile) $(Option): !STF_NCN_InstallMode is:"$(!NTN_InstallMode)
Debug-Output "$(InfFile) $(Option): !STF_NCDETECT is: "$(!STF_NCDETECT)
Debug-Output "$(InfFile) $(Option): !STF_NCOPTION is: "$(!STF_NCOPTION)
Debug-Output "$(InfFile) $(Option): !STF_NCDETCARD is: "$(!STF_NCDETCARD)
Debug-Output "$(InfFile) $(Option): !STF_NCDETINFO is: "$(!STF_NCDETINFO)
Debug-Output "$(InfFile) $(Option): !STF_GUI_UNATTENDED is: "$(!STF_GUI_UNATTENDED)
Debug-Output "$(InfFile) $(Option): !STF_BusType is $(!STF_BUSTYPE)" ;; Primary Bus
Debug-Output "$(InfFile) $(Option): !STF_BusTypeList is $(!STF_BUSTYPELIST)" ;; All Buses
Debug-Output "$(InfFile) $(Option): =================================================="
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
Debug-Output "$(InfFile) $(Option): Installadapter"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error: cannot get an error string."
goto ShellCodeError
endif
goto end
else
set OldVersionExisted = $(TRUE)
endif
Endif
Goto adapteroptions
configureadapter = +
Debug-Output "$(InfFile) $(Option): Configureadapter"
ifstr $(!STF_GUI_UNATTENDED) != "YES"
RunProgram ExitCode "" "" $(!STF_WINDOWSSYSPATH)\eipconf.exe
endif
goto successful
adapteroptions = +
Debug-Output "$(InfFile) $(Option): Adapteroptions"
set from = adapteroptions
ifstr(i) $(!NTN_InstallMode) == configure
goto updateparameters
endif
installproduct =+
Debug-Output "$(InfFile) $(Option): installproduct"
StartWait
set AdapterList = $($R1)
ifint $(OldVersionExisted) == $(FALSE)
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
;Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
endif
;
; Check to see if the Product Software key exists already in the system service keys
; before we try to add the software component.
;
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_READ) KeyNt
CloseRegKey $(KeyNt)
Ifstr(i) $(KeyNt) == ""
Debug-Output "$(InfFile) $(Option): AddSoftwareComponent"
Debug-Output "$(InfFile) $(Option): --> $(Manufacturer)"
Debug-Output "$(InfFile) $(Option): --> $(ProductSoftwareName)"
Debug-Output "$(InfFile) $(Option): --> $(ProductSoftwareTitle)"
Debug-Output "$(InfFile) $(Option): --> $(STF_CONTEXTINFNAME)"
Debug-Output "$(InfFile) $(Option): --> $(ProductSoftwareImagePath)"
Debug-Output "$(InfFile) $(Option): --> $(NetEventDLL)"
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Set OEM_ABANDON_SOFTWARE = TRUE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto fatalregistry
endif
endif ;; Does Services\Expresip exist?
Debug-Output "$(InfFile) $(Option): About to look for ATTO PCI Cards"
;;
;; We must be installing a PCI card.
;;
;; Note: If we are are on WinNT v3.51 and above, we have PCI detection support
;; and are able to setup the adapter without user intervention. Otherwise, we can
;; only do one card at a time.
;;
set TargetVersion = *($(CurrentVersionValue),4)
Debug-Output "$(InfFile) $(Option): Current Version:"$(TargetVersion)
ifstr $(TargetVersion) == $(NT350VersionConstant) ;; We need to ask on v3.50
Debug-Output "Running on WindowsNT 3.50"
set Version350 = $(TRUE)
else
Debug-Output "Running on WindowsNT 3.51"
set Version350 = $(FALSE)
endif
ifint $(Version350) == $(TRUE)
Debug-Output "Running on WindowsNT v3.50, Not using PCI Detection!!!"
ifstr $(!STF_GUI_UNATTENDED) == "YES"
Debug-Output "$(InfFile) $(Option): Running in GUI unattended mode"
ifstr(i) $(!AutoNetInterfaceType) != ""
set BusInterfaceType = $(!AutoNetInterfaceType)
else
set BusInterfaceType = 5
endif
ifstr(i) $(!AutoNetBusNumber) != ""
set BusNumber = $(!AutoNetBusNumber)
else
set BusNumber = 0
endif
set NTDetected = $(FALSE)
set AdapterList = $(Option) ;; 1 Item to install
Debug-Output "$(InfFile) $(Option): BusInterfaceType = $(BusInterfaceType)"
Debug-Output "$(InfFile) $(Option): BusNumber = $(BusNumber)"
else
Debug-Output "$(InfFile) $(Option): Running 3.50 Bus Dialog"
set BusInterfaceType = 5
set BusNumber = 0
set NTDetected = $(FALSE)
Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error."
goto ShellCodeError
endif
set BusInterfaceType = $($R1)
set BusNumber = $($R2)
set AdapterList = $(Option) ;; 1 Item to install
Debug-Output "$(InfFile) $(Option): BusInterfaceType = $(BusInterfaceType)"
Debug-Output "$(InfFile) $(Option): BusNumber = $(BusNumber)"
endif
else
Debug-Output "$(InfFile) $(Option): Running 3.51 using PCI Dectection"
;;
;; v3.51 has PCI detection code built in.
;;
;;set BusInterfaceType = 5
;;set BusNumber = 0
;; Shell $(UtilityInf),GetBusTypeDialog,$(ProductHardware$(Option)Description) $(BusInterfaceType) $(BusNumber)
set NTDetected = $(TRUE)
set Vendor = 4215 ;; 0x1077 is ATTO's Vendor ID!
set CFIDList = $($(Option)CFIDList)
Debug-Output "$(InfFile) $(Option): VendorID = $(Vendor)"
Debug-Output "$(InfFile) $(Option): CFIDList = $(CFIDList)"
set AdapterList = {}
ForListDo $(CFIDList)
set-div CFID = $($) 1
Shell $(UtilityInf), GetPCIInformation, $(Vendor) $(CFID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ForListDo $($R0)
set AdapterList = >($(AdapterList), $($))
EndForListDo
EndForListDo
ifstr(i) $(AdapterList) == {}
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = USER_CANCEL
set from = end
goto nonfatal
endif
endif ;;; NT v3.50
; "AdapterList" has the list of currently installed adatpers in the system!
;
Debug-Output "$(InfFile) $(Option): Adapterlist = $(AdatperList)"
ForListDo $(AdapterList)
Set InstallCard = "YES"
ifint $(NTDetected) == $(TRUE)
set DetectedBusNum = *($($),1)
set DetectedSlotNum = *($($),2)
Debug-Output "$(InfFile) $(Option): DetectedBusNumber = $(DetectedBusNum)"
Debug-Output "$(InfFile) $(Option): DetectedSlotNum = $(DetectedSlotNum)"
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(DetectedBusNum), +
$(DetectedSlotNum), $(ProductHardware$(Option)Description), $(ProductHardwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) == "YES"
set InstallCard = "NO" ;; Don't want to re-install, it's there already
endif
endif
;;
;; Are we installing the card?
;;
ifstr(i) $(InstallCard) == "NO"
Debug-Output "$(InfFile) $(Option): Card Already at $(DetectedBusNum):$(DetectedSlotNum) already installed!"
set Error = "An adapter at $(DetectedBusNum):$(DetectedSlotNum) is already installed!"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
else
Debug-Output "$(InfFile) $(Option): Installing Card at $(DetectedBusNum):$(DetectedSlotNum)!"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
;
; We are installing PCI
;
set BusTypeNum = 5
ifstr(i) $(Option) == "ExpresIP"
set CardType = 0
else
set CardType = 2
endif
;;
;; If we used the OS to dected the card, then we already know bus and slot information.
;;
ifint $(NTDetected) == $(TRUE)
set BusNumber = $(DetectedBusNum)
set SlotNum = $(DetectedSlotNum)
set BusInterfaceType = $(BusTypeNum)
;
; Note: we need to record SlotNumber too so that we can use the
; "IsNetCardAlreadyInstalled" routine
;
Set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{Slot,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)}+
}
Debug-Output "$(InfFile) $(Option): Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
Set NewValueList = { {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(SlotNum)} }
Debug-Output "$(InfFile) $(Option): Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
else
Set NewValueList = {+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
}
Debug-Output "$(InfFile) $(Option): Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
endif
Set NewValueList = {+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusInterfaceType)},+
{CardType,$(NoTitle),$(!REG_VT_DWORD),$(CardType)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
}
Debug-Output "$(InfFile) $(Option): Set HardwareParameterKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Debug-Output "$(InfFile) $(Option): HardwareRuleKey = $(NewValueList)"
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
CloseRegKey $(HardParameterKey)
goto exitloop
endif
EndForListDo
EndWait
exitloop =+
Debug-Output "$(InfFile) $(Option): DoAskSource"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) NO
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Debug-Output "$(InfFile) $(Option): SrcDir= $(SrcDir) ExePath= $(!STF_WINDOWSSYSPATH)"
ifstr $(!STF_GUI_UNATTENDED) != "YES"
RunProgram ExitCode "" "" $(!STF_WINDOWSSYSPATH)\eipconf.exe "/a"$(AdapterNumber)
endif
goto successful
updateparameters =+
Debug-Output "$(InfFile) $(Option): Updateparameters"
set HardParameterKey = $($R3)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(KeyParameters)
goto successful
bindingadapter =+
Debug-Output "$(InfFile) $(Option): bindingadapter"
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Debug-Output "$(InfFile) $(Option): removeadapter"
Debug-Output "$(InfFile) $(Option): ----> $(ProductKeyName), $(!NTN_RegBase)"
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
UpgradeSoftware = +
Debug-Output "$(InfFile) $(Option): UpdateSoftware"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
goto fatalregistry
endif
goto end
successful = +
Debug-Output "$(InfFile) $(Option): Successful"
goto end
abandon = +
Debug-Output "$(InfFile) $(Option): Abandon"
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
warning = +
Debug-Output "$(InfFile) $(Option): warning"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Debug-Output "$(InfFile) $(Option): nonfatalinfo"
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Debug-Output "$(InfFile) $(Option): nonfatal"
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
Debug-Output "$(InfFile) $(Option): nonfatalmsg"
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
; goto "end"
goto "RemoveAdapter"
endif
fatalregistry = +
Debug-Output "$(InfFile) $(Option): fatalregistry"
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fatal = +
Debug-Output "$(InfFile) $(Option): fatal"
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
Debug-Output "$(InfFile) $(Option): ShellCodeError"
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
Debug-Output "$(InfFile) $(Option): Setfailed"
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-Exe $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Exe $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Source Media Descriptions]
1 = "Windows NT Setup Disk #1"
2 = "ATTO ExpressPCI-FC Fibre Channel Adapter"
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[Files-Inf]
2, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-Exe]
2, eipconf.exe , SIZE=150000
; Driver files
[Files-ExpresIP]
2,ExpresIP.SYS , SIZE=88888
[LanguagesSupported]
ENG
[OptionsTextENG]
ExpresIP = "ATTO ExpresIP Network Driver"
[FileConstantsENG]
ProCaption = "Windows NT v3.5 Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
ConnectionList = ^(ConnectionChoices$(Option), 1)
ConnectionValues = ^(ConnectionChoices$(Option), 2)
NoList = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle = "Error: "$(Function$(Option)Title)
ShellCodeErrorText = "Shell Code Error."
CANNOT_FIND_ANY_CARD = "Network card is not present in the system"
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.