1. epci2fc110.exe Driver
2. EPCIFC2.INF File Contents

EPCIFC2.INF Driver File Contents (epci2fc110.exe)

;
; EXPRESFC.INF 
; ATTO ExpresFC Windows 2000/XP SCSI Miniport Driver
; Copyright 2002 ATTO Technology
;

[version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%ATTO%
DriverVer=08/11/2003,1.10
;CatalogFile=EpciFc2.cat


[Manufacturer]
%ATTO%=ATTO


[ATTO]
%ExpresFC3321.DeviceDesc%  = EpciFc2_Inst, PCI\VEN_1000&DEV_0622&SUBSYS_0018117C
%ExpresFC3322.DeviceDesc%  = EpciFc2_Inst, PCI\VEN_1000&DEV_0626&SUBSYS_0019117C
%ExpresFC3342.DeviceDesc%  = EpciFc2_Inst, PCI\VEN_1000&DEV_0626&SUBSYS_001B117C


[ControlFlags]
ExcludeFromSelect = PCI\VEN_1000&DEV_0622&SUBSYS_0018117C,  \
                    PCI\VEN_1000&DEV_0626&SUBSYS_0019117C,  \
                    PCI\VEN_1000&DEV_0626&SUBSYS_001B117C


[EpciFc2_Inst]
CopyFiles = @EpciFc2.sys


[EpciFc2_Inst.Services]
AddService = EpciFc2, %SPSVCINST_ASSOCSERVICE%, EpciFc2_Service_Inst, EpciFc2_EventLog_Inst


[EpciFc2_Service_Inst]
ServiceType    = %SERVICE_KERNEL_DRIVER%
StartType      = %SERVICE_BOOT_START%
ErrorControl   = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\EpciFc2.sys
LoadOrderGroup = SCSI Miniport
AddReg         = pnpsafe_pci_addreg
AddReg         = bus_type_fibre
AddReg         = EpciFc2_Registry_Update

[EpciFc2_Registry_Update]
HKLM,SYSTEM\CurrentControlSet\Services\EpciFc2\Parameters\Device,MaximumSGList,0x00010001,0xFF
HKLM,SYSTEM\CurrentControlSet\Services\EpciFc2\Parameters\Device,NumberOfRequests,0x00010001,0xE0
HKLM,SYSTEM\CurrentControlSet\Services\EpciFc2\Parameters\Device,LargeLuns,0x00010001,0x01
HKLM,SYSTEM\CurrentControlSet\Services\EpciFc2\Parameters\Device,DriverParameters,0x00000000,""
HKLM,SYSTEM\CurrentControlSet\Services\Disk,TimeOutValue,0x00010001,0x0A


;*************************************************************
;These addreg sections should be used when installing services to indicate
;which interface types are safe for PNP and which aren't.  INTERFACE_TYPE
;is defined in NTDDK.H

[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001


;*************************************************************
;These addreg sections should be used for non-SCSI miniports 
;to indicate what STORAGE_BUS_TYPE they actually do support.

[bus_type_fibre]
HKR, "Parameters", "BusType", 0x00010001, 0x00000006


;*************************************************************
;The EventLog entries are the same for all SCSI miniports.

[EpciFc2_EventLog_Inst]
AddReg = EpciFc2_EventLog_AddReg


[EpciFc2_EventLog_AddReg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\epcifc2.sys"
HKR,,TypesSupported,0x00010001,7


[DestinationDirs]
DefaultDestDir = 12 ; DIRID_DRIVERS


[SourceDisksFiles]
EpciFc2.sys = 1
;EpciFc2.cat = 1


[SourceDisksNames]
1 = %ID1%,,


[Strings]
ATTO = "ATTO Technology, Inc."

ExpresFC3321.DeviceDesc = "ATTO ExpressPCI-FC 3321 Fibre Channel Adapter"
ExpresFC3322.DeviceDesc = "ATTO ExpressPCI-FC 3322 Fibre Channel Adapter"
ExpresFC3342.DeviceDesc = "ATTO ExpressPCI-FC 3342 Fibre Channel Adapter"

ID1 = "ATTO EpciFc2 Driver Install Disk"

;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START     = 0
SERVICE_ERROR_NORMAL   = 1
REG_EXPAND_SZ          = 0x00020000
REG_DWORD              = 0x00010001