1. hotkeyxp.zip Driver
2. setup.ini File Contents

setup.ini Driver File Contents (hotkeyxp.zip)

;Hot-Key function Seting Without H8 ------------------------------
;ENABLE -- Enable or Disable the function.'1' means enable the 
;          function,'0' means disable the function. 
;D_TYPE -- APMD port type. A '0' means the APMD is located at
;          a 16bit I/O space while '1' means the PCI configuration 
;          space was used.
;APMC   -- The software SMI command port. Write a command code to
;          this port can generate a software SMI.
;          This port is one byte wide and locate at 16bit I/O space.
;APMD   -- The Data port for extra information of the software 
;          SMI command. When Hotkey software SMI issued this port 
;          contain the Fn code (1 ~12) to indicate which hotkey 
;          function was required.When the command finished, this 
;          port contain the status of the execution.This port is 
;          one byte wide and located at either 16 bit I/O space or 
;          PCI configuration space which is decided by D_TYPE.
;SMI_CMD-- The Hotkey SMI code. Write this code to APMC port to 
;          issue a software SMI for Hotkey purpose.
;          This code is one byte wide.
;BatteryLow -- 
;BatteryCritical --
;BatteryFull --
;BatteryEachVoltage --


[HKENABLE]
FNF2=0
FNF3=0
FNF4=0
FNF5=1
FNF6=1
FNF7=1
FNF10=1
FNF11=1

[HKSETUP]
D_TYPE=0
APMC=1048
APMD=1049
SMI_CMD=C0


[FNF2]

DELDEVICE_2K=PCI\VEN_1039&DEV_7013&SUBSYS_101B13BD&REV_A0\3&61aaa01&0&0E
DELDEVICE_9X=PCI\VEN_1039&DEV_7013&SUBSYS_101B13BD&REV_A0\3&61aaa01&0&0E


[FNF10]
LIBatteryLow=9.9
LIBatteryCritical=9.5

NIMHBatteryLow=7.5
NIMHBatteryCritical=6.7