ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
º º
º Compex RL100TX PCI Fast Ethernet Adapte º
º Copyright (C) 1997 by PDS. All Rights Reserved. º
º º
ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
Run the file RXNTRBOT.EXE to a new formatted diskette.
It will self-extract to the following files;
RL100TX.DOS
RL100TX.NIF
DOSBB.CNF
PROTOCOL.INI
Lable the disk as Compex NT Remoteboot Support Disk
Installation procedure to add remoteboot support on Windows NT Server
v3.50/v3.51/v4.0 with Compex RL100TX PCI adapters.
Before You Start
================
You should have the following items ready before you start:
1. Windows NT Server has been installed and you have
administrator user right.
2. Latest distribution diskette for that Compex LAN Adapter
and/or
3. Compex NT Remoteboot Support Diskette.
This disk is available from Compex WEB,FTP or BBS server.
Download file name: NTRBUPx.EXE
4. Compex Boot ROM RL100TX-NW/LS/LM/NT v1.10d-32K or higher installed
on the adapter and configured to boot to "Windows NT" boot protocol.
** Note:- Throughout this procedure, Windows NT Server is assumed to
have installed to C:\WINNT directory.
Installation Steps
==================
Step 1.
------
Install the Remoteboot Service.
-------------------------------
Add NT Remoteboot software support and create the remoteboot image
structure on the NT server. Make sure DLC and NetBEUI protocols are also
installed.
Remotebooting MS-DOS OS is the installation procedure explained below.
For more details on NT Remoteboot software installation and creation
of the remoteboot image structure, please refer to NT Server's manual, or
NT Help document (if installed in NT Server during initial installation),
or Windows NT Server CR-ROM help document.
Step 2:
-------
Install the MS-DOS system files.
--------------------------------
1. Prepare a bootable disk and copy all the DOS utilities file to the disk
e.g. MS-DOS v6.22, that the workstaiton will boot.
2. On Windows NT Server, log on as Administrator user or equivalent
administrator user.
3. Do the following sub-steps to copy the files.
a) Copy all the files on bootdisk prepared in Step2-1 to the following
directory,
C:\> Copy A:\*.* C:\WINNT\RPL\RPLFILES\BINFILES\DOS622
b) Change directory to C:\WINNT\RPL\RPLFILES\BINFILES\DOS622
and copy the system files in bootdisk to drive C
attrib -s -h A:\io.sys
attrib -s -h A:\msdos.sys
copy A:\io.sys C:
copy A:\msdos.sys C:
Step 3:
------
Start the Remoteboot Service.
-----------------------------
1. In the Control Panel, choose the Services icon.
2. In the Services dialog box, select the Remoteboot service.
3. Choose the Start button.
Step 4:
------
Copy Compex RL100TX PCI card profile files to NT Server.
-------------------------------------------------------
1. On Windows NT Server, log on to a user account that belongs
to the Administrators local group.
2. Make a directory RL100X under directory,
C:\WINNT\RPL\BBLOCK\NETBEUI
3. From Compex support disk or RL100TX PCI distribution disk
copy the following;
a) Copy Compex RL100TX PCI card profile files DOSBB.CNF and
PROTOCOL.INI to the subdirectory,
C:\WINNT\RPL\BBLOCK\NETBEUI\RL100X
b) Copy RL100X.DOS to the subdirectory,
C:\WINNT\RPL\BBLOCK\NDIS
c) Copy RL100X.NIF to subdirectory,
C:\WINNT\RPL\RPLFILES\BINFILES\LANMAN.DOS\DRIVERS\NIF
Step 5.
-------
Creating Remoteboot configurations for RL100TX PCI Adapter.
----------------------------------------------------------
** Note: Some entries are case sensitive. Please enter as indicated.
1. Run RPLCMD utility to add a boot block record for the new
RL100TX PCI adapter. Please follow the sequence of commands
to create boot block record:
C:\WINNT\RPL> rplcmd
Adapter Boot Config Profile Service Vendor Wksta [Quit]: b
Add Del Enum: a
BootName=RL100X_B
VendorName=008048
BbcFile=BBLOCK\NETBEUI\RL100X\DOSBB.CNF
All other parameters are optional
BootComment=Compex RL100TX PCI
WindowSize=0
** Note: VendorName should be exactly the same as the above,
e.g., 008048.
2. Run rplcmd utility to add the new configuration.
Follow the sequence of commands to create the configuration:
C:\WINNT\RPL> rplcmd
Adapter Boot Config Profile Service Vendor Wksta [Quit]: c
Add Del Enum: a
ConfigName=RL100X_C
BootName=RL100X_B
DirName=DOS
DirName2=DOS622
FitShared=fits\dos622.FIT
FitPersonal=fits\dos622p.FIT
All other parameters are optional
ConfigComment=MS-DOS 6.22 Compex RL100TX PCI
DirName3=
DirName4=
For BootName, enter the name of the boot block record you
created in Step 5-1.
Step 6.
-------
Create new Profiles.
--------------------
1. On Windows NT Server, log on to a user account that belongs
to the Administrators local group.
2. From the Remoteboot menu in Remoteboot Manager, choose
New Profile.
3. For the Profile Name, type a name for this profile, for
example, DOS622RL.TX
** Note: For the Profile name, if the server's RPL directory is
on a FAT file system, use standard MS-DOS 8.3 format (eight
characters, with an optional period and three more characters
with no spaces or backslashes(\)).
4. In the Configuration box, choose configuration you just
created, e.g. MS-DOS 6.22 Compex RL100TX PCI
5. For the Description, type a comment for the profile. For example,
Compex RL100TX PCI boot MS-DOS v6.22
6. Choose the OK button.
Step 7:
-------
Adding a new workstation.
-------------------------
1. On Windows NT Server, log on to a user account that belongs
to the Administrators local group.
2. Start the Remoteboot Manager on the server.
3. Start the remoteboot workstation.
** Note: The workstation does not actually boot, but it does send
a boot request to the server.
4. In Remoteboot Manager on the server, from the View menu,
choose Refresh.
5. In Remoteboot Manager, select the adapter record that has
appeared with the network adapter ID number in place of the
workstation name.
From the Remoteboot menu, choose Convert Adapters.
6. In the Wksta Name box, type a name for the workstation. The
name can have up to 15 characters. The Remoteboot service will
create a Windows NT user account with this name, not for the
user but for the workstation itself.
7. In the Description box, type a comment that describes the
workstation. The box already contains a comment provided by
the network adapter itself.
8. Choose a configuration type:
Shared if this workstation can share its profile with other
workstations.
Personal if this workstation must use a personal copy of a
profile so that you can customize the environment for the
workstation.
9. In the Wksta In Profile box, choose the profile just created,
e.g., DOS622RL.TX, for this workstation.
10. In the TCP/IP Configuration box, enter appropriate addresses
only if the workstation will use TCP/IP and will not use DHCP
for automatic address handling.
11. Choose the Add button.
Step 8:
------
Testing the remote boot on the workstation.
-------------------------------------------
Cold boot the workstation. A remote boot logon prompt appears:
Type remoteboot username, or press enter if it is <workstation>:
Step 9:
-------
Remoteboot is successfully installed.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.