Installing the driver for Microsoft Windows 2000
===========================================================
1. Make sure your computer is power-off.
2. Plug the adapter into one PCI slot of your computer.
3. Turn on the power. Your computer should be booting.
4. Windows 2000 will find new hardware, and
"Found New Hardware Wizard" will appear.
5. Insert the driver diskette into the floppy disk, and
press "Next", and "Next" again in the following windows.
6. Select "Specify a location" in the checkbox, and press "Next"
to continue.
7. In the following dialog box, specify the directory of the driver
files. For example:
A:\Windows2000 (A: is floppy drive)
and then click "OK".
8. The wizard should found the driver now. Follow the direction
to complete installation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.