\HELP\WFW311\WFW311.TXT
NETGEAR EA201 Ethernet Card
---------------------------
Driver Installation for Microsoft Windows for Workgroups 3.11
-------------------------------------------------------------
Getting Started
---------------
If desired, the duplex mode of the EA201 adapter card can also be
modified using the included SETUP.EXE program in the root directory.
For more detail, please refer to the SETUP.TXT file in the \HELP
directory.
Installation Procedure
----------------------
1. In Program Manager, open "Network" -> "Network Setup" -> "Drivers".
2. In "Network Drivers" window, select "Add Adapter".
3. When installing the LAN driver, Windows for Workgroups will present
a list of all available drivers. But the NETGEAR EA201 drivers
are not included in the system software (the EA201.386, EA201.DOS
and EA201.COM driver programs). Select "Unlisted" for 3rd party
adapters not in the driver list.
4. Windows for Workgroups will ask for the drive/path containing the
EA201 drivers. Provide the path to the OEMSETUP.INF file in the
\WFW311 directory.
eg. A:\WFW311 if installing from the provided driver disk.
Windows for Workgroups should copy the appropriate drivers to the
Windows for Workgroups system.
5. Select the "NETGEAR EA201 Ethernet Card".
At this point, the drivers have been properly copied and the
installation would proceed to the next step. Please refer to
your Windows for Workgroups installation guide for the correct
procedures.
After the initial installation, the EA201 drivers will be
permanently installed into the Windows for Workgroups system.
Subsequent accesses to the network driver list will include these
drivers as options.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.