\HELP\PKTDRV\PCTCP.TXT
NETGEAR EA201 Ethernet Card
---------------------------
Packet Driver Installation for FTP Software PC/TCP
--------------------------------------------------
Getting Started
---------------
If desired, the duplex mode of the EA201 adapter card can also be
modified using the included SETUP.EXE program in the root directory.
For more detail, please refer to the SETUP.TXT file in the \HELP
directory.
Installation Procedure
----------------------
If the EA201.COM program is used, follow these steps:
1. Execute EA201.COM by typing:
>EA201 [/option] <packet_int_no>
<packet_int_no> is the software interrupt vector number used
by the packet driver program. This can be from
96 to 128.
/d Delay Initial - The driver program will not
initialize the network interface card until
the packet driver program is accessed by its
upper layer program.
/w The /w parameter is for use only in the
Windows environment.
See \HELP\PKTDRV\PKTDRV.TXT for addition parameters.
2. Execute the ETHDRV.EXE and IDRIVE.EXE device driver programs.
These programs are provided by FTP.
3. FTP's PC/TCP and its associated programs are ready to run.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.