- prohance.zip Driver
- PROHANCE.TXT File Contents
PROHANCE.TXT Driver File Contents (prohance.zip)
---------------------------------------
ProHance AutoCAD ADI Driver Version 5.4
---------------------------------------
The ProHance ADI driver supports the following devices:
PowerMouse 100 -- 40 button programmable mouse
PowerMouse 70 -- 17 button programmable mouse
PowerMouse 50 -- 12 button programmable mouse
To load the ProHance ADI driver, use:
POWER PUCK /ADI
This defines [PUCK n] commands on buttons 1 through 9 and defines
the right mouse key as [PUCK 1] (typically a cancel button).
Configure the AutoCAD digitizer for "ADI (real mode)" in version 12
or "AutoDesk Device Interface" in earlier versions, with the default
interrupt, 79.
With high resolution ADI screen drivers, e.g. 1024 by 768 pixels,
you may use:
\ProHance\POWER PUCK /ADI /X1024 /Y768
to set the digitizer resolution to match your screen resolution.
-------------------------
An expanding family of optional PowerPaks are also available.
Each PowerPak consists of its own preprogrammed button definitions,
a corresponding template, and a reference manual. PowerPaks are
currently available for AutoCAD and Ventura Publisher. These
can be purchased directly from ProHance at 415/967-5774.
-------------------------
POWER, POWERED or POWERPLS may be used to record and edit custom
macros to automate the repetitive tasks that you use daily. See
your manual for help on using the macro editor.
--------------------------
To minimize memory use when using the PowerMouse exclusively with
AutoCAD and other applications which move their own cursor (Ventura),
you may use:
\ProHance\POWER ACAD /TINY
which removes the EGA cursor support routines from the resident POWER.
To reload full EGA/VGA cursor support for programs which need it,
such as Microsoft Windows or Word, use:
\PROHANCE\POWER OFF
\PROHANCE\POWER
ª