; ;<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><> ;<>********************************************************<> ;<>* *<> ;<>* Socket Communications, Inc. *<> ;<>* *<> ;<>********************************************************<> ;<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><> ; ; Copyright (c) 2002-2004, Socket Communications, Inc. ; ; 37400 Central Court ; Newwark, CA 94560 ; 510-744-2700(voice) ; 510-744-2727(fax) ; www.socketcom.com ; ; File: SocketBt.INF ; ;------------------------------------------------------------------------------- ; File Description and General Information ;------------------------------------------------------------------------------- ; ; This setup information file is used to install Socket Communications, Inc. ; Bluetooth PC/CF Card devices on x86 computers running any of the following ; operating systems from Microsoft: Windows 9x, ME, Windows 2000 and XP. ; ; Socket Bluetooth CF Card support software: ; ; SKTSIOBT.sys - Windows 2000 and XP high Speed (921kbps) device driver ; sktsio9x.vxd - Windows 9x and ME high speed (921kbps) device driver ; ; Microsoft support Software: ; ; serenum.sys - Windows 2000/Xp upper-level device filter driver ; MsPorts.dll - Windows 2000/Xp PC/CF card property page ; ; serenum.vxd - Windows 9x/Me upper-level device filter driver ; serialui.dll - Windows 9x/Me PC/CF card property page ; ;--------------------------------------------------------------------------------- ; History Section ;--------------------------------------------------------------------------------- ; ; Created 3/15/2004 rlk ; ;--------------------------------------------------------------------------------- ;--------------------------------------------------------------------------------- ; [version] LayoutFile = layout.inf signature = "$WINDOWS NT$" Provider = %Socket% Class = Ports ClassGuid = {4D36E978-E325-11CE-BFC1-08002BE10318} DriverVer = 03/23/2004, 1.0.3.7 ;CatalogFile = socketbt.CAT ; Digital Signature file ; ;--------------------------------------------------------------------------------- ; Install Disk Section ;--------------------------------------------------------------------------------- ; [DestinationDirs] DefaultDestDir = 11 ; Windows\System32 CopyNtDriver = 12 ; Windows\System32\Drivers CopyNtPropPage = 11 ; Windows\System32 ; CopyW9xDriver = 11 ; Windows\system [SourceDisksNames] 1 = %DiskId1%,,,"" [SourceDisksFiles] SKTBt2k.sys = 1,, SktSio9x.vxd = 1,, ; ;--------------------------------------------------------------------------------- ; Class Installer section - Windows 9x and ME ;--------------------------------------------------------------------------------- ; [ClassInstall] AddReg=PortsClass.AddReg [PortsClass.AddReg] HKR,,,,%PortsClassName% HKR,,Icon,,-23 ; ;-------------------------------------------------------------------------------- ; Class32 Installer section - Windows 2000 and Xp ;-------------------------------------------------------------------------------- ; [ClassInstall32.NT] AddReg=PortsClass.NT.AddReg [PortsClass.NT.AddReg] HKR,,,,%PortsClassName% HKR,,Icon,,"-23" HKR,,Installer32,,"MsPorts.Dll,PortsClassInstaller" ; ;-------------------------------------------------------------------------------- ; Exclude List Section ;-------------------------------------------------------------------------------- ; [ControlFlags] ExcludeFromSelect = PCMCIA\Socket-CF+_Personal_Network_Card_Rev_2.5-E3CE ; ;-------------------------------------------------------------------------------- ; Device Selection Section ;-------------------------------------------------------------------------------- ; [Manufacturer] %Socket% = BtIdList [BtIdList] %BT.DeviceDesc% = BtCOM,PCMCIA\Socket-CF+_Personal_Network_Card_Rev_2.5-E3CE ; ;-------------------------------------------------------------------------------- ; Windows 9x and ME Driver Install Section ;-------------------------------------------------------------------------------- ; [BtCOM] CopyFiles = CopyW9xDriver AddReg = SetupRegW9x,W9xOverRides [CopyW9xDriver] sktsio9x.vxd [SetupRegW9x] HKR,,PortSubClass,1,01 ; Type 01 = serial HKR,,DevLoader,0,*vcomm ; Loads device driver as needed. HKR,,Enumerator,0,serenum.vxd ; Enumerator HKR,,PortDriver,0,sktsio9x.vxd ; Device driver HKR,,Contention,0,*vcd ; Static VxD that handles contention and virtualization for the device HKR,,ConfigDialog,0,serialui.dll ; DLL called to service comm API functions HKR,,EnumPropPages,,"serialui.dll,EnumPropPages" ; HKLM,%PowerMgr%,"EnablePowerManagement",1,0 ; HKR,,EnableIRQSharing,1,01,00,00,00 ; Reponse to SetDefaultCommConfig() by COMMCONFIG HKR,,DCB,3,1c,00,00,00,80,25,00,00,11,33,00,00,00,00,0a,00,0a,00,08,00,00,11,13,00,00,00 ; ; This following are the default register setting for the serial device (16C950/HIS-2) ; and entries are in hex. ; HKR,,CfgHIS2,1,\ ; (Byte 1) - Uart Type 950 =0, Not95x = F0 0,\ ; (Byte 2) - Chip revision level 0 = "A", 1 = "B", 2 ="C" 2,\ ; (Byte 3) - Clock prescaler register value (CPR) range 1 - 31 7/8 step 1/8 frequency 20,\ ; (Byte 4) - N-Times clock register value (TCR) range 0 - 3 = 16 clock samples 4 - 15 = clock samples 0,\ ; (Byte 5) - Transmitter Interrupt Trigger Level (TTL) range 0 - 127 4,\ ; (Byte 6) - Receiver Interrupt Trigger Level (RTL) range 0 - 127 64,\ ; (Byte 7) - Automatic Flow Control Lower Trigger level (FCL) range 0 - 127 10,\ ; (Byte 8) - Automatic Flow Control Higher Trigger level (FCH) range 0 - 127 70,\ ; (Byte 9) - Special RHR Trigger level if 550/750 mode set 1,\ ; (Byte 10,11) - Clock divisor (DLMDLL) range 1 - 65535 1,0,\ ; (Byte 12) - Auto flow control flags: CTS = 1, RTS = 2, DTR = 4 DSR = 8, Xon/Xoff = 16 10,\ ; (Byte 13) - Force an option flag: Force450 =1, Force550 = 2, Force a baud = 16; Force Non 950 = 3; 0,\ ;------------------------------------------------------------------------------------------------------ ; (Byte 14) - Flag for Baudrate mapping 0 = No mapping, 1 = mapping 0,\ ;------------------------------------------------------------------------------------------------------ ; The following are expanded BaudRates that can be mapped to the standard PC BaudRates. ; The mappings will be used by the device driver if the mapping flag is set to true (1). ; ; 75 =0, 110 =1, 134 =2, 150 =3, 300 =4, 600 =5, 1200 =6, 1800 =7, 2000 =8, ; 2400 =9, 3600 =10, 4800 =11, 7200 =12, 9600 =13, 12800 =14, 14400 =15, 19200 =16 23040 =17, ; 28800 =18, 38400 =19, 57600 =20, 115200 =21, 230400 =22, 460800 =23, 921600 =24 ;------------------------------------------------------------------------------------------------------ ; ; (Byte 15) - Baud 110 Standard PC BaudRate selections that can be re-mapped 1,\ ; (Byte 16) - Baud 300 4,\ ; (Byte 17) - Baud 600 5,\ ; (Byte 18) - Baud 1200 6,\ ; (Byte 19) - Baud 2400 9,\ ; (Byte 20) - Baud 4800 b,\ ; (Byte 21) - Baud 9600 d,\ ; (Byte 22) - Baud 19200 10,\ ; (Byte 23) - Baud 38400 13,\ ; (Byte 24) - Baud 57600 14,\ ; (Byte 25) - Baud 115200 15,\ ; (Byte 26,27,28) - Socket Communication, Inc. Options 0,0,0 ; ;---------------------------------------------------------------------- ; Windows 9x and ME Logical Configuration list ;---------------------------------------------------------------------- ; Section name format meaning: ; Char 1 = c (COM port) ; Char 2 = I/O config: 1 (3f8), 2 (2f8), 3 (3e8), 4 (2e8), a (any) ; Char 3 = IRQ config: #, a (any) ;---------------------------------------------------------------------- ; ; ;----------------------------------------------------------------------------- ; OverRide Parameter Tables Windows 9x and Me ;----------------------------------------------------------------------------- ; [W9xOverRides] ; ; ; OVERRIDE for (xxxx / xxxx) ; HKR,Override,0000,1, \ ; ; CONFIGMG_VERSION ; 00,04,00,00, \ ; ; PRIORITY ; 00,00,00,00, \ ; ; I/O Resource Descriptor 0: ; 24,00,00,00, \ ; Total length of I/O Resource Descriptor 02,00,00,00, \ ; ResType_IO = 0x00000002 01,00, \ ; IOD_Count; 0C,00, \ ; IOD_Type; // IOType_Range = 0x000C 00,00, \ ; IOD_Alloc_Base; 00,00, \ ; IOD_Alloc_End; 00,00, \ ; IOD_DesFlags; 00, \ ; IOD_Alloc_Alias; 00, \ ; IOD_Alloc_Decode; F8,FF, \ ; IOR_Align; // Mask for base alignment 08,00, \ ; IOR_nPorts; // Number of ports 00,01, \ ; IOR_Min; // Min port address FF,FF, \ ; IOR_Max; // Max port address 00,00, \ ; IOR_RangeFlags; // Flags 00, \ ; IOR_Alias; // Alias offset 00, \ ; IOR_Decode; // Address specified 40,00,00,00, \ ; PCCARD flags, 0x40 = 16-bit port ; IRQ Resource Descriptor ; 14,00,00,00, \ ; Total length of IRQ Resource Descriptor 04,00,00,00, \ ; ResType_IRQ = 0x00000004 00,00, \ ; IRQD_Flags; 00,00, \ ; IRQD_Alloc_Num; // Allocated IRQ number ff,ff, \ ; IRQD_Req_Mask; // Mask of possible IRQs 00,00, \ ; IRQD_Reserved; 20,00,00,00, \ ; PCCARD flags, 0x20 = Level mode interrupts ; ; REQUEST_CONFIG_PKT Descriptor ; Same as PCMCIA Card Services RequestConfiguration argument structure. ; The Socket field in this structure does not need to be filled in. ; 19,00,00,00, \ ; Total length of REQUEST_CONFIG_PKT Descriptor 7C,89,00,00, \ ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C 00,00, \ ; Socket; 02,00, \ ; Attributes; 21, \ ; Vcc; 00, \ ; Vpp1 00, \ ; Vpp2 02, \ ; IntType; 00,04,00,00, \ ; ConfigBase; 00, \ ; Status; 00, \ ; Pin; 00, \ ; Copy; 2D, \ ; ConfigIndex; 03, \ ; Present; ; ; TERMINATOR ; 00,00,00,00 ; ; OVERRIDE for (xxxx / xxxx) ; HKR,Override,0001,1, \ ; ; CONFIGMG_VERSION ; 00,04,00,00, \ ; ; PRIORITY ; 00,00,00,00, \ ; ; I/O Resource Descriptor 0: ; 24,00,00,00, \ ; Total length of I/O Resource Descriptor 02,00,00,00, \ ; ResType_IO = 0x00000002 01,00, \ ; IOD_Count; 0C,00, \ ; IOD_Type; // IOType_Range = 0x000C 00,00, \ ; IOD_Alloc_Base; 00,00, \ ; IOD_Alloc_End; 00,00, \ ; IOD_DesFlags; 00, \ ; IOD_Alloc_Alias; 00, \ ; IOD_Alloc_Decode; F8,FF, \ ; IOR_Align; // Mask for base alignment 08,00, \ ; IOR_nPorts; // Number of ports 00,01, \ ; IOR_Min; // Min port address FF,FF, \ ; IOR_Max; // Max port address 00,00, \ ; IOR_RangeFlags; // Flags 00, \ ; IOR_Alias; // Alias offset 00, \ ; IOR_Decode; // Address specified 40,00,00,00, \ ; PCCARD flags, 0x40 = 16-bit port ; IRQ Resource Descriptor ; 14,00,00,00, \ ; Total length of IRQ Resource Descriptor 04,00,00,00, \ ; ResType_IRQ = 0x00000004 00,00, \ ; IRQD_Flags; 00,00, \ ; IRQD_Alloc_Num; // Allocated IRQ number ff,ff, \ ; IRQD_Req_Mask; // Mask of possible IRQs 00,00, \ ; IRQD_Reserved; 20,00,00,00, \ ; PCCARD flags, 0x20 = Level mode interrupts ; ; REQUEST_CONFIG_PKT Descriptor ; Same as PCMCIA Card Services RequestConfiguration argument structure. ; The Socket field in this structure does not need to be filled in. ; 19,00,00,00, \ ; Total length of REQUEST_CONFIG_PKT Descriptor 7C,89,00,00, \ ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C 00,00, \ ; Socket; 02,00, \ ; Attributes; 32, \ ; Vcc; 00, \ ; Vpp1 00, \ ; Vpp2 02, \ ; IntType; 00,04,00,00, \ ; ConfigBase; 00, \ ; Status; 00, \ ; Pin; 00, \ ; Copy; 2D, \ ; ConfigIndex; 03, \ ; Present; ; ; TERMINATOR ; 00,00,00,00 ; ;-------------------------------------------------------------------------------- ; Windows 2000/Xp Device Driver Section ;-------------------------------------------------------------------------------- ; [BtCOM.NT] CopyFiles = CopyNtDriver [CopyNtDriver] %DeviceDriver%,,,2 ; ;-------------------------------------------------------------------------------- ; Windows 2000/Xp Device Driver Hardware Section ;-------------------------------------------------------------------------------- ; [BtCOM.NT.HW] AddReg = SetupNtHw [SetupNtHw] HKR,,"UpperFilters",0x00010000,"serenum" HKR,,"95xSpecific",0x00000001,01,00,00,00,00,00,c9,16,20,00,01,00,04,64,10,70,08,00,00,00,00,00,00,10 HKR,,"ClockRate",0x00010001, 1843200 HKR,,"EnablePowerManagement",0x00010001,0 ; single serial port card HKR,,"CardType",0x00010001, 1 HKR,,"DriverName", 0x00000000,"%DeviceDriver%" ;HKR,,"DriverName", 0x00000000,"SktBt2k" HKR,,SktIndex,0x00010001,1 ; UART 1 HKR,,"NoDisplayInUI",0x00010001, 0 ; Display COM port assignment ;HKR,,FixBaudRate,0x00010001,0 ; Fixed Baudrate Selections are 110 thru 921600 ; Entry of 0 means override is disabled ; %DeviceDriver% ;-------------------------------------------------------------------------------- ; Windows 2000/XP Service Section ;-------------------------------------------------------------------------------- ; [BtCOM.NT.Services] AddService = SocketBtCOM, 0x00000002, Serial_Service_Inst, Serial_EventLog_Inst AddService = Serenum,,Serenum_Service_Inst [Serial_Service_Inst] DisplayName = %BT.SVCDESC% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 0 ; SERVICE_ERROR_IGNORE ServiceBinary = %12%\%DeviceDriver% LoadOrderGroup = Extended base [Serenum_Service_Inst] DisplayName = %Serenum.SVCDESC% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %12%\serenum.sys LoadOrderGroup = PNP Filter [Serial_EventLog_Inst] AddReg = Serial_EventLog_AddReg [Serial_EventLog_AddReg] HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\IoLogMsg.dll;%%SystemRoot%%\System32\drivers\%DeviceDriver%" HKR,,TypesSupported,0x00010001,7 ; ;-------------------------------------------------------------------------------- ; Windows 2000 and XP OverRide Section ;-------------------------------------------------------------------------------- ; [ComPort.NT.LogConfigOverride] LogConfig = Override0 LogConfig = Override1 LogConfig = Override2 LogConfig = Override3 LogConfig = Override4 ;-------------------------------------------------------------------------------- ; Windows 2000 and XP Override list ;-------------------------------------------------------------------------------- ; [Override0] ConfigPriority=DESIRED IOConfig = 3E8-3EF ; COM3 IRQConfig = 3,4,5,7,9,10,11,12,15 MfCardConfig = 400:1D:0 [Override1] ConfigPriority=DESIRED IOConfig = 2E8-2EF ; COM4 IRQConfig = 3,4,5,7,9,10,11,12,15 MfCardConfig = 400:25:0 [Override2] ConfigPriority=DESIRED IOConfig = 2F8-2FF ; COM2 IRQConfig = 3,4,5,7,9,10,11,12,15 MfCardConfig = 400:15:0 [Override3] ConfigPriority=DESIRED IOConfig = 8@100-3F0%FFF8(FFFF::) ; Any where between 100 and 3f0 IRQConfig = 3,4,5,7,9,10,11,12,15 MfCardConfig = 400:2D:0 [Override4] ConfigPriority = DESIRED MemConfig = 1000@00000000-FFFFFFFF%1000(RW) IRQConfig = 3,4,5,7,9,10,11,12,15 MfCardConfig = 400:2D:0 PcCardConfig = 0:0(A) ; ;-------------------------------------------------------------------------------- ; Strings Section ;-------------------------------------------------------------------------------- ; [Strings] REG_SZ = 0x00000000 REG_MULTI_SZ = 0x00010000 REG_EXPAND_SZ = 0x00020000 REG_BINARY = 0x00000001 REG_DWORD = 0x00010001 DiskId1 = "Socket Installation Disk #1" PortsClassName = "Ports (COM & LPT)" Socket = "Socket Communications, Inc." Serenum.SVCDESC = "Serenum Filter Driver" BT.SVCDESC = "Socket Bluetooth Port Driver" BT.DeviceDesc = "Socket Bluetooth CF Card Adapter" PowerMgr = "System\CurrentControlSet\Services\VXD\VCOMM" DeviceDriver = "SktBt2K.sys"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.