# | README file for | | ELSA QuickStep 1000 | Version 2.28/2.32 | | Copyright (c) 1993-98 ELSA AG, Aachen (Germany) | | ELSA AG Internet : http://www.elsa.de | Sonnenweg 11 LocalWeb : +49-(0)241-938800 | D-52070 Aachen CompuServe : GO ELSA | | ELSA Inc. Internet : http://www.elsa.com | 2231 Calle De Luna CompuServe : GO ELSA | Santa Clara, CA 95054 | USA | | ELSA Asia Inc. Internet : http://www.elsa.com | 7F-11, No. 188, Sec. 5 CompuServe : GO ELSA | Nanking East Road | Taipei 105 | Taiwan, R. O. C. | | 01/05/98 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Table of Contents 1. Overview 2. Contents 3. Installation 4. Notes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1. Overview: This file contains notes and changes to the ISDN drivers. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2. Contents: This directory contains the following files: README.TXT This file LIESMICH.TXT German version of this README.TXT CAPI.DLL CAPI Dynamic Link Library for OS/2 VCAPI11.SYS virtual divice driver for OS/2 VCAPI11.EXE DOS-TSR for the DOS-Box (VDM) CAPI20.DLL CAPI Dynamic Link Library for OS/2 VCAPI20.SYS virtual divice driver for OS/2 VCAPI20.EXE DOS-TSR for the DOS-Box (VDM) [WINOS2] CAPI.DLL Dynamic Link Library for Win/OS2 2.1 Driver for CAPI 1.1 and 1TR6 (national ISDN): ISDNCAPX.EXE CAPI version 1.1 driver for ELSA QuickStep 1000 D channel protocol : 1TR6 (national ISDN) B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL, V.120 - - - - - - - - - - - - - - - - - - - - - - - - 2.2 Driver for CAPI 1.1 and DSS1 (EURO-ISDN): DSS1CAPX.EXE CAPI version 1.1 driver for ELSA QuickStep 1000 D channel protocol : DSS1 (EURO-ISDN) B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL, V.120 - - - - - - - - - - - - - - - - - - - - - - - - 2.3 Treiber fuer CAPI 2.0 und 1TR6 (nationales ISDN): ISDNC20X.SYS CAPI version 2.0 driver for ELSA QuickStep 1000 D channel protocol : 1TR6 (national ISDN) B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL, V.120 ISO 8208 (X.25), T.90 - - - - - - - - - - - - - - - - - - - - - - - - 2.4 Treiber fuer CAPI 2.0 und DSS1 (EURO-ISDN): DSS1C20X.SYS CAPI version 2.0 driver for ELSA QuickStep 1000 D channel protocol : DSS1 (EURO-ISDN) B channel protocols: HDLC transparent, bit transparent, X.75, T.70NL, V.120 ISO 8208 (X.25), T.90 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3. Installation: The following illustration shows the mounting bracket of your ISDN plug and play adapter board : _____ \ | | | | | | | | | |___| |___|<- ISDN line connector | | | o |<- ISDN connection status display (yellow LED) | o |<- ISDN interface status display (green LED) |___| _ | | | | ________________________________| | _| | |_ <- ISDN line connector | | | o<- yellow LED | _ __ o<- green LED |___| |____________________| |__| The ISDN plug and play adapter board is full software- configurable and has NO jumper. - - - - - - - - - - - - - - - - - - - - - - - - a.) Installation with plug and play: If you system supports plug and play you just have to install the driver without any parameters. - - - - - - - - - - - - - - - - - - - - - - - - b.) Installation without plug and play: If your system don't supports plug and play, and you install the driver without any parameters, the driver uses the following defaults: I/O-address : 0x160h IRQ : 15 If this parameters are used by an other programm, you have to install the driver with the following parameters: <Drivername> [/aI/O-address] [/rIRQ] e.g.: ISDNCAPI /a160 /r12 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4. Notes: V.120 under CAPI 1.1 and CFOS (version newer than 07/15/96): Enter the following AT-command: AT B12 S17=1 S76=1 Now, the ISDN adapter board tries to get a V.120 connection erverytime you dial "ATDn" (n = number).. If you want to get back to X.75 mode, you have to enter: AT&F - - - - - - - - - - - - - - - - - - - - - - - - To suppress screen messages call VCAPI11.EXE with "/Q". The VCAPI11 has only been tested with cFos (DOS) and T-Online (Windows 3.1). - - - - - - - - - - - - - - - - - - - - - - - - The Soundblaster 16 PnP is handled as non Plug and Play device when you use the original OS/2 Warp 4 driver. This may result in conflicting resources. You should use the actuel PnP driver. Even if Plug and Play is supported it is possible to have conflicting resources. This conflicts are caused by non Plug and Play devices for which no snooper is installed. To solve this conflicts you can manualy reconfigure these devices to unused resources. - - - - - - - - - - - - - - - - - - - - - - - - The latest information you will always find in the ELSA LocalWeb or on our homepage. Have fun with your ISDN board.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.