#
| README file for
|
| ELSA QuickStep 1000
| Version 2.28
|
| Copyright (c) 1993-98 ELSA AG, Aachen (Germany)
|
| ELSA AG Internet : http://www.elsa.de
| Sonnenweg 11 LocalWeb : +49-(0)241-938800
| D-52070 Aachen CompuServe : GO ELSA
|
| ELSA Inc. Internet : http://www.elsa.com
| 2231 Calle De Luna CompuServe : GO ELSA
| Santa Clara, CA 95054
| USA
|
| ELSA Asia Inc. Internet : http://www.elsa.com
| 7F-11, No. 188, Sec. 5 CompuServe : GO ELSA
| Nanking East Road
| Taipei 105
| Taiwan, R. O. C.
|
| 01/05/98
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Table of Contents
1. Overview
2. Contents
3. Installation
4. Notes
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
1. Overview:
This file contains notes and changes to the
ISDN drivers.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2. Contents:
This directory contains the following files:
README.TXT this file
LIESMICH.TXT german version of this README.TXT
ISDNMON.EXE ELSA ISDNmonitor for DOS
2.1 Driver for CAPI 1.1 and 1TR6 (national ISDN):
ISDNCAPI.EXE CAPI version 1.1 driver for ELSA QuickStep 1000
D channel protocol : 1TR6 (national ISDN)
B channel protocols: HDLC transparent, bit transparent,
X.75, T.70NL, V.120
ISDNCAPX.EXE CAPI version 1.1 driver for ELSA QuickStep 1000
D channel protocol : 1TR6 (national ISDN)
B channel protocols: HDLC transparent, bit transparent,
X.75, T.70NL, V.120
ISO 8208 (X.25), T.90
- - - - - - - - - - - - - - - - - - - - - - - -
2.2 Driver for CAPI 1.1 and DSS1 (EURO-ISDN):
DSS1CAPI.EXE CAPI version 1.1 driver for ELSA QuickStep 1000
D channel protocol : DSS1 (EURO-ISDN)
B channel protocols: HDLC transparent, bit transparent,
X.75, T.70NL, V.120
DSS1CAPX.EXE CAPI version 1.1 driver for ELSA QuickStep 1000
D channel protocol : DSS1 (EURO-ISDN)
B channel protocols: HDLC transparent, bit transparent,
X.75, T.70NL, V.120
ISO 8208 (X.25), T.90
- - - - - - - - - - - - - - - - - - - - - - - -
2.3 Driver for CAPI 2.0 and 1TR6 (national ISDN):
ISDNC20I.EXE CAPI version 2.0 driver for ELSA QuickStep 1000
D channel protocol : 1TR6 (national ISDN)
B channel protocols: HDLC transparent, bit transparent, X.75, V.120
ISDNC20X.EXE CAPI version 2.0 driver for ELSA QuickStep 1000
D channel protocol : 1TR6 (national ISDN)
B channel protocols: HDLC transparent, bit transparent,
X.75, T.70NL, V.120
ISO 8208 (X.25), T.90
- - - - - - - - - - - - - - - - - - - - - - - -
2.4 Driver for CAPI 2.0 and DSS1 (EURO-ISDN):
DSS1C20I.EXE CAPI version 2.0 driver for ELSA QuickStep 1000
D channel protocol : DSS1 (EURO-ISDN)
B channel protocols: HDLC transparent, bit transparent, X.75, V.120
DSS1C20X.EXE CAPI version 2.0 driver for ELSA QuickStep 1000
D channel protocol : DSS1 (EURO-ISDN)
B channel protocols: HDLC transparent, bit transparent,
X.75, T.70NL, V.120
ISO 8208 (X.25), T.90
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3. Installation:
The following illustration shows the mounting bracket of
your ISDN plug and play adapter board :
_____
\ |
| |
| |
| |
| |
|___|
|___|<- ISDN line connector
| |
| o |<- ISDN connection status display (yellow LED)
| o |<- ISDN interface status display (green LED)
|___|
_
|
|
|
|
________________________________|
| _|
| |_ <- ISDN line connector
| |
| o<- yellow LED
| _ __ o<- green LED
|___| |____________________| |__|
The ISDN plug and play adapter board is full software-
configurable and has NO jumper.
- - - - - - - - - - - - - - - - - - - - - - - -
a.) Installation with plug and play:
If you system supports plug and play you just have to
install the driver without any parameters.
- - - - - - - - - - - - - - - - - - - - - - - -
b.) Installation without plug and play:
If your system don't supports plug and play, and you
install the driver without any parameters, the driver
uses the following defaults:
I/O-address : 0x160h
IRQ : 15
If this parameters are used by an other programm, you
have to install the driver with the following
parameters:
<Drivername> [/aI/O-address] [/rIRQ]
e.g.: ISDNCAPI /a160 /r12
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
4. Notes:
V.120 under CAPI 1.1 and CFOS (version newer than 07/15/96):
Enter the following AT-command:
AT B12 S17=1 S76=1
Now, the ISDN adapter board tries to get a V.120 connection
erverytime you dial "ATDn" (n = number)..
If you want to get back to X.75 mode, you have to enter:
AT&F
- - - - - - - - - - - - - - - - - - - - - - - -
V.120 under CAPI 2.0 and CFOS (version newer than 07/15/96):
Enter the following AT-command:
AT B12 S17=1 S76=1
Now, the ISDN adapter board tries to get a V.120 connection
erverytime you dial "ATDn" (n = number)..
If you want to get back to X.75 mode, you have to enter:
AT&F
- - - - - - - - - - - - - - - - - - - - - - - -
The latest information you will always find in the
ELSA LocalWeb or on our homepage.
Have fun with your ISDN board.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.