# | README file for | | ELSA UTILS | | Copyright (c) 1993-98 ELSA AG, Aachen (Germany) | | ELSA AG Internet : http://www.elsa.de | Sonnenweg 11 LocalWeb : +49-(0)241-938800 | D-52070 Aachen CompuServe : GO ELSA | | ELSA Inc. Internet : http://www.elsa.com | 2231 Calle De Luna CompuServe : GO ELSA | Santa Clara, CA 95054 | USA | | ELSA Asia Inc. Internet : http://www.elsa.com | 7F-11, No. 188, Sec. 5 CompuServe : GO ELSA | Nanking East Road | Taipei 105 | Taiwan, R. O. C. | | 01/05/98 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Table of Contents 1. Overview 2. Contents 3. Usage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1. Overview: This file contains notes and changes to the utilities for the ISDN drivers. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2. Files: README.TXT This file LIESMICH.TXT German version of this README.TXT ISDNMON.EXE ELSA ISDNmonitor for Windows 3.1x CLEARAUTO.EXE deletes DOS CAPI out of the autoexec.bat GOCAPI.EXE starts CAPI - - - - - - - - - - - - - - - - - - - - - - - - 3. Program description 3.1 ISDNMON The ELSA ISDNmonitor runs with Windows 3.x. The main window shows the following information: - B-Channels (B1 and B2) Con (Yellow LED): Off = B-Channel not active Partial = B-Channel requested On = B-Channel active (charged!) Tx (Red LED): Off = No Data sent On = Data sent Rx (Red LED): Off = No Data received On = Data received - S0 Interface S0 Power (Green LED): Off = No S0 Power On = S0 Power S0 Activation (Green LED): Off = S0 Bus active On = S0 Bus inactive TEI (Green LED): Off = No TEI On = Got TEI L2 (Green LED): Off = D-Channel not active On = D-Channel active In the menu topic "Info" you will find entries called "About" and "General Info". In the menu topic "Options" you will find the entrie "On Top". With "On Top" you can tell ISDNmonitor always to stay on top of all other windows. "General Info" gives you further information about your CAPI, your driver, your hardware and your ISDNmonitor. If you are using an US CAPI-Driver you will find another entry called "US Info". The value of "On Top" and the window position of the ISDNmonitor is saved when the ISDNmonitor is terminated and restored on the next aktivation. - - - - - - - - - - - - - - - - - - - - - - - - Notes: The ELSA ISDNmonitor for Windows runs with the ELSA CAPI 1.1 Driver for DOS or the ELSA CAPI 2.0 Driver for DOS Ver. 2.14 or higher and the ELSA Windows 3.x CAPI.DLL or CAPI20.DLL. You can also use the ELSA CAPI Driver for Windows 3.1 Ver. 2.14 or higher.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.