1. ne-34pci.zip Driver
2. readme.txt File Contents

readme.txt Driver File Contents (ne-34pci.zip)

        =================================================================
          How to install Windows for Workgroup 3.1/3.11 with NE34ND.DOS
        =================================================================

* Please follow the procedure below to setup Windows for Workgroup 3.1:

   1. If you have not installed WfW 3.1, install it with "no network card"
      now.

   2. Invoke WfW 3.1, open "CONTROL PANEL" and double click [NETWORK] icon.

   3. Insert NE-34 PCI Drivers diskette into drive A:

   4. Click [Adapter] icon. REMOVE old network driver, and ADD
      "Unlisted or Updated Network Adapter".

   5. Type "A:\WFW31" when it asks for a vendor-provided driver.

   6. Follow the direction to finish the setup procedure.

* Please follow the procedure below to setup Windows for Workgroup 3.11:

   1. If you have not installed WfW 3.11, install it with "no network card"
      now.

   2. Invoke WfW 3.11, open "NETWORK SETUP" and click [Drivers] button.

   3. Insert NE-34 PCI Drivers diskette into drive A:

   4. REMOVE old network driver, and ADD
      "Unlisted or Updated Network Adapter".

   5. Type "A:\WFW31" when it asks for a vendor-provided driver.

   6. Follow the direction to finish the setup procedure.

* Trouble Shooting

   1. Message---> !! No NE34PCI card detected

      Solution--> Make sure that your NE-34 PCI card is plugged steadily.

   2. Message---> !! No free NE34PCI card

      Solution--> One driver for  one card. Make sure  that there  is less
                  drivers  loaded than  card  plugged. If  option  keyword
                  SelectedID is assigned, make sure all node ID's assigned
                  is correct or let drivers without  SelectedID  be loaded
                  after those with SelectedID.

   3. Message---> !! Cannot open PROTMAN$

      Solution--> Make sure PROTMAN.DOS is loaded before NE34ND.DOS,and it
                  is initialized successfully.If the syntax of PROTOCOL.INI
                  is incorrect, PROTMAN$ cannot be loaded.

   4. Message---> !! Bad Parameter in PROTOCOL.INI

      Solution--> The  parameter  is  invalid.  For  example, the  correct
                  SelectedID format  need two  single quotation signs (').
                  If you fail to do it, this message will be shown.

   5. Message---> !! Unknown Keyword in PROTOCOL.INI

      Solution--> NE34ND only accepts two keywords:
                  DRIVERNAME and SELECTED. Other keywords are unknown.
                  Notice ! PCI bus need not assign IOBASE and INTERRUPT.

   6. Message---> !! Specified SELECTEDID is absent or bound

      Solution--> You specified a NODE ID at keyword SelectedID , and this
                  ID is bound by another drivers or can not be found. Make
                  sure that the ID is correct.

* Version Release

   1.04 11-15-1995 This is the first revision of NE34ND.DOS 2.0.1 MAC Driver.
   2.00 02-05-1996 Reconstruct the source to support OS/2.
   2.01 02-26-1996 .