NE34ND.SYS Ver 1.10
02/26/96
Description:
1. NE34ND.SYS is an NDIS 3.x driver for Windows NT 3.1 Platforms.
If there is only one NE-34 PCI Adapter, the driver will automatically
get IOBASE and IRQ from PCI Configuration Space.
If there is more than one NE-34 PCI Adapter , the user can indicate a
each card by specifying an ID.
2. OEMSETUP.INF is a Network Setup Information File for Windows NT 3.1
Platforms.
Installation:
1. Load NE34ND.SYS and OEMSETUP.INF files into local hard disk.
2. Double-click the [Control Panel] icon in the 'Main' Program Group.
3. Double-click the [Network] icon from the 'Control Panel' Window.
4. Click the [Add Adapter] button in the 'Network Settings' Dialog Box.
5. When the 'Add Network Adapter' Dialog Box appears , select the
'<Other> Requires disk from manufacturer' item in the list of network
cards and then press <Enter>.
6. Type the path contains NE34ND.SYS and OEMSETUP.INF files and then
press <Enter>.
7. Select the 'NE-34 PCI Adapter' item in the 'Select OEM Option' Dialog
Box and click the [OK] button.
8. If there is only one NE-34 PCI card in your system,click the [Ignore]
button when the 'Input Ethernet ID' Dialog Box appears. Otherwise,
type Ethernet ID when the 'Input Ethernet ID' Dialog Box appears and
then click the [OK] button.
9. Bind the adapter to the transport drivers by choosing the [Binding]
button in the 'Network Settings' Dialog Box.
10.When finished the installation procedure, click the [OK] button.
11.The NT SETUP program has already copied the files NE34ND.SYS and
OEMSETUP.INF to the c:\winnt35\system32\drivers directory , but
it has been renamed as another installation information file.
12.Restart your computer.
Use:
1. boot your computer,
2. If you want to select another NE-34 card, perform the following steps:
a. Double-click the [Control Panel] icon in the 'Main' Program Group.
b. Double-click the [Network] icon from the 'Control Panel' Window.
c. Select the 'NE-34 PCI Adapter' item in the 'Installed Adapter Cards'
Window, and double-click the ]Configure] button.
d. When the 'Input Ethernet ID' Dialog Box appears, type the Ethernet
ID of the other NE-34 PCI card you want to select and then click
the [OK] button.
e. Click the [OK] button in the 'Network Settings' Dialog Box.
f. Restart your system.
Trouble Shooting
1. Message---> At least one service or driver failed during system
startup. Use Event Viewer to examine the event log for
details.
Solution--> Make sure
a. your NE-34 PCI card is plugged into your system, or
b. if there is more than one NE-34 PCI cards, you must
indicate each card by inputing IDs.
2. Condition-> The Windows NT 3.1 can not boot normally.
Solution--> Make sure that your NE-34 PCI card is connected to the
cable.
Histories of Release:
***) 1.00, 11-03-1995
First release.
***) 1.10, 02-26-1996
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.