1. ne-34pci.zip Driver
2. readme.txt File Contents

readme.txt Driver File Contents (ne-34pci.zip)

     =====================================================================
      How to install IBM LAN Server & OS/2 LAN Requesters with NE34ND.DOS
     =====================================================================

* Please follow the procedure below to setup
  IBM LAN Server & OS/2 LAN Requesters:

   1. When installation program asks for a network drivers, select
      "Other Driver".
      (You can also type "C:\IBMCOM\INSTALL" to re-invoke this process)

   2. Insert NE-34 PCI Drivers diskette into drive A:

   3. Type "A:\LANSVR.OS2" and press <Enter>.
      "NE-34 PCI Ethernet Controller" will appear at Adapter list box.

   4. Select "NE-34 PCI Ethernet Controller" and ADD it.

   5. ADD the protocol you desired.

   6. Follow the direction to finish the setup procedure.

* Trouble Shooting

   1. Message---> !! No NE34 PCI card detected

      Solution--> Make sure that your NE-34 PCI card is plugged steadily.

   2. Message---> !! No free NE-34 PCI card

      Solution--> One driver  for one card. Make sure that there is  less
                  drivers  loaded than card  plugged. If  option  keyword
                  SelectedID is assigned , make sure  that all  node ID's
                  assignment is correct or let drivers without SelectedID
                  be loaded after those with SelectedID.

   3. Message---> !! Cannot open PROTMAN$

      Solution--> Make sure PROTMAN.DOS is loaded  before NE34ND.DOS,and it
                  is initialized successfully.If the syntax of PROTOCOL.INI
                  is incorrect, PROTMAN$ cannot be loaded.

   4. Message---> !! Bad Parameter in PROTOCOL.INI

      Solution--> The parameter is invalid.For example,the correct SelectedID
                  format  need two single quotation signs ('). If you fail to
                  do it, this message will be shown.

   5. Message---> !! Unknown Keyword in PROTOCOL.INI

      Solution--> NE34ND only accepts two keywords:
                  DRIVERNAME and SELECTED. Other keywords are unknown.
                  Notice ! PCI bus need not assign IOBASE and INTERRUPT.

   6. Message---> !! Specified SELECTEDID is absent or bound

      Solution--> You specified a NODE ID at keyword SelectedID,and this ID
                  is bound by another drivers or can not be found.Make sure
                  that the ID is correct.

* Version Release

   1.04 11-15-1995 This is the first revision of NE34ND.DOS 2.0.1 MAC Driver.
   2.00 02-05-1996 Reconstruct the source to support OS/2.
   2.01 02-26-1996 .