1. pa2600.exe Driver
2. Win95.txt File Contents

Win95.txt Driver File Contents (pa2600.exe)

                10/100M Fast Ethernet PCMCIA Adapter Installation
                   	for Windows 95/Windows 95 OSR2


 1.0 Installation Notes For Win95 Users
 2.0 Installation Notes For Win95 OSR2 Users
 ____________________________________________


 1.0 Installation Notes For Win95 Users
 ______________________________________


    1. We assume that the PCMCIA Chipset drivers are loaded and
       functioning. The "System" icon in the "Control Panel" window can
       report on its functionality. Any question on this layer need to be
       taken up with the machines manufacturer.

    2. After Windows 95 is fully functional and the PCMCIA Chipset drivers
       are working properly, you can install the 10/100M Fast Ethernet PCMCIA 
       Adapter.

    3. Insert the 10/100M Fast Ethernet PCMCIA Adapter into the PCMCIA Slot.

    4. The card will be recognized, but will request a driver. Please
       select "Have disk from Manufacture".

    5. Insert the driver diskette in Drive A.

    6. Please input the full path to the drivers.

        i.e. A:\Win95

    7. The driver will be installed and it may ask for the installation
       CD/disks. After the installation is complete, Win95 will reboot,
       and the card will be fully functional.



 2.0 Installation Notes For Win95 OSR2 Users
 ____________________________________________

    1. Start your PC, then insert the 10/100M Fast Ethernet PCMCIA Adapter
       into an available PC Card slot in your PC.

    2. After starting Windows 95, the 10/100M Fast Ethernet PCMCIA Adapter 
       will be detected automatically, then the Update Device Driver Wizard 
       window appears.

    3. Click the Next button in the Update Device Driver Wizard window.
       Win95 will start to search floppy drive A for network driver,
       and Windows displays the message

            "Windows was unable to locate a driver for this device"

    4. Insert the 10/100M Fast Ethernet PCMCIA Adapter Installation diskette 
       into drive A.

    5. Click the "Other Location..." in the Update Device Driver Wizard
       window, then the Select Other Location window appears.

    6. Type A:\Win95 and click OK button.

    7. Click Finish button, then the Win95 starts to copy the 10/100M Fast 
	   Ethernet PCMCIA Adapter driver to the user's hard disk.

    8. If Win95 prompt you "The file 'Fp16n3.sys' on 10/100M Fast 
       Ethernet PCMCIA Adapter Driver Disk could no be found", "Insert 
       10/100M Fast Ethernet PCMCIA Adapter Driver Disk into the drive 
       selected below and, click ok", fill the "Copy file from:" 

                   A:\Win95

       Then click ok.	    	

    9. Restart your computer.