procedure: From System Maintenance mode, insert driver diskette in to a: drive # cd tmp # doscp a:/scounix.5/unixdrvr.113 VOL.000.000 # cd.. #scoadmin choose Software Manager from list and press enter choose Software from manu and press enter choose Install New and press enter choose From scosysv and press enter in Media Device press down arrow key change to Media Images and press enter use tap key change to continue and press enter type /tmp in the Image Directory use tap key change to O.K. and press key choose Full and press enter exit from Host manu after installation complete highlight Networks in Scoadmin and press enter Network Configuration Manager and press enter Hardware and press enter Add new LAN adaptr and press enter choose Accton EN166x PnP ISA Ethernet Adapter from list in search for network adapter window, press yes Accton EN166x PnP ISA Ethernet Adapter - I/O Address ??? should be shown in Network Adapter Detected window, then choose continue and press enter mark SCO TCP/IP and press enter fill your ip address, Netmask .....,etc use tab key change to Advanced Options to enable Gateway change to OK and press enter(serveral times) Exit from Hardware pull down menu relink kernel after successful relink, exit and reboot to test the adapter function If you want remove the adapter driver, please follow the following procedure: # scoadmin highlight Networks and press enter Network Configuration Manager and press enter mark HW Accton EN166x PnP ISA Ethernet Adapter - I/O Address ??? use tab key to change to Hardware and press enter from Hardware pull down menu choose Remove network device choose yes to confirm the remove action remove the HW SCO TCP/IP Lopback driver similar to the steps removing the EN166x Adapter IMPORTANT!!! not to relink when you leave from Network Configuration Manager # scoadmin Software manager and press enter mark EN166x Network Adapter Driver (ver 1.1.3) change to Software and choose Remove Software, then, press enter choose Remove to confirm your remove action go back to Hardware/Kernel manager in Scoadmin to Relink Kernel That will be O.K.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.