OEMSETNT.INF Driver File Contents (FastEthernet.zip)


[Identification]
    OptionType = NetAdapter
[PlatformsSupported]
    ISA
    EISA
    "Jazz-Internal Bus"
    PCI
[Options]
    NC100A
    NC100
    MX98715
    ;;DEC21140
    ;;DEC21143
    
[ConnectionChoicesNC100]
    Connect_0 = "Speed AutoDetect",  0
    Connect_1 = "100Mb Full-Duplex", 1
    Connect_2 = "100Mb Half-Duplex", 2
    Connect_3 = "10Mb  Full-Duplex", 3
    Connect_4 = "10Mb  Half-Duplex", 4
    
[ConnectionChoicesMX98715]
    Connect_0 = "AutoDetect" , 0
    Connect_1 = "TP_10" , 1
    Connect_2 = "TP_10+FullDuplex" , 2
    Connect_3 = "TP_100" , 3
    Connect_4 = "TP_100+FullDuplex" , 4

        	
[ConnectionChoicesNC100A]
    Connect_0 = "AutoSense", 0
    Connect_1 = "10BaseT", 1
    Connect_2 = "10BaseT Full_Duplex", 2
    Connect_3 = "100BaseTx", 3
    Connect_4 = "100BaseTx Full_Duplex", 4
    
;;[ConnectionChoicesDEC21140]
;;    Connect_0 = "AutoSense", 0
;;    Connect_1 = "10BaseT", 1
;;    Connect_2 = "10BaseT Full_Duplex", 2
;;    Connect_3 = "100BaseTx", 3
;;    Connect_4 = "100BaseTx Full_Duplex", 4
    
;;[ConnectionChoicesDEC21143]
;;    Connect_0 = "AutoSense", 0
;;    Connect_1 = "10BaseT", 1
;;    Connect_2 = "10BaseT Full_Duplex", 2
;;    Connect_3 = "100BaseTx", 3
;;    Connect_4 = "100BaseTx Full_Duplex", 4


[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf   = "SUBROUTN.INF"
SoftwareType    = "driver"
Exit_Code       = 0
NetEventDLL     = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL     = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer    = "Network Everywhere"
ProductMajorVersion     = "1"
ProductMinorVersion     = "00"
ProductVersion  = $(ProductMajorVersion)"."$(ProductMinorVersion)
NetRuleSoftwareUse = $(SoftwareType)



ProductSoftwareNC100Name = "NC100"
ProductSoftwareNC100Title    = "Network Everywhere Fast Ethernet Adapter(NC100)"
ProductSoftwareNC100ImagePath = "\SystemRoot\System32\drivers\NC100.SYS"
NetRuleSoftwareNC100Type     = "NC100Sys ndisDriver NC100Driver"
NetRuleSoftwareNC100BindForm = """NC100Sys"" yes no container"
NetRuleSoftwareNC100Class    = {"NC100Driver basic"}
NetRuleSoftwareNC100SWBindable = {"NC100Driver NC100Adapter non exclusive 100"}



ProductSoftwareNC100AName = "NC100A"
ProductSoftwareNC100ATitle    = "Network Everywhere Fast Ethernet Adapter(NC100v2)"
ProductSoftwareNC100AImagePath = "\SystemRoot\System32\drivers\NC100A.SYS"
NetRuleSoftwareNC100AType     = "NC100ASys ndisDriver NC100ADriver"
NetRuleSoftwareNC100ABindForm = """NC100ASys"" yes no container"
NetRuleSoftwareNC100AClass    = {"NC100ADriver basic"}
NetRuleSoftwareNC100ASWBindable = {"NC100ADriver NC100AAdapter non exclusive 100"}



OptionNC100HelpFile = "NC100.hlp"
OptionNC100AHelpFile = "NC100A.hlp"

NC100CFID    = 87101657;;  0x053110d9
MX98715CFID  = 3239383469  ;; 0xc11511ad
NC100ACFID   = 159716119  ;; 0x09851317
DEC21140CFID = 593937  ;; 0x00091011
DEC21143CFID = 1642513  ;; 0x00191011

ProductHardwareNC100Name = "NC100"
ProductHardwareNC100Title = "Network Everywhere Fast Ethernet Adapter(NC100)"
NetRuleHardwareNC100Type  = "NC100 NC100Adapter"
NetRuleHardwareNC100Class = {"NC100Adapter basic"}
AdapterType = 5   ;; PCI board
HelpNC100Id = 20



ProductHardwareMX98715Title = "Linksys LNE100TX Fast Ethernet Adapter"



ProductHardwareNC100AName = "NC100A"
ProductHardwareNC100ATitle = "Network Everywhere Fast Ethernet Adapter(NC100v2)"
NetRuleHardwareNC100AType  = "NC100A NC100AAdapter"
NetRuleHardwareNC100AClass = {"NC100AAdapter basic"}
HelpNC100AId = 10

;;ProductHardwareDEC21140Title = "Network Everywhere Fast Ethernet Adapter(DEC21140)"
;;ProductHardwareDEC21143Title = "Network Everywhere Fast Ethernet Adapter(DEC21143)"



NetRuleHardwareBindForm = " yes yes container"
ProductKeyNC100Name  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareNC100Name)"\CurrentVersion"
ParamKeyNC100Name    = $(!NTN_ServiceBase)"\"$(ProductHardwareNC100Name)"\Parameters"

ProductKeyNC100AName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareNC100AName)"\CurrentVersion"
ParamKeyNC100AName    = $(!NTN_ServiceBase)"\"$(ProductHardwareNC100AName)"\Parameters"

VersionKeyName    = $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion"

[GeneralConstants]
from      = ""
to        = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull         = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct      = ""
KeyParameters   = ""
TRUE            = 1
FALSE           = 0
NoTitle            = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath      = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status     = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set SourceMedia      = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(SourceMedia)
[ReturnOptions]
    set Status        = STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
        ifstr(i) $($1) == ""
           goto returnoptions
        endif
        set PlatformList = ^(PlatformsSupported, 1)
        Ifcontains(i) $($1) in $(PlatformList)
           goto returnoptions
        else
           set Status = STATUS_NOTSUPPORTED
           goto finish_ReturnOptions
        endif
    else
        set Status = STATUS_NOLANGUAGE
        goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)  
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status         = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option   = $($1)
    set SrcDir   = $($2)
    set AddCopy  = $($3)
    set DoCopy   = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    ifstr(i) $(Option) == "NC100"
     set Option1 = $($1)
    endif
    ifstr(i) $(Option) == "MX98715"
     set Option1 = $($1)
     set Option = "NC100"
    endif     
    ifstr(i) $(Option) == "NC100A"
     set Option1 = $($1)
    endif     
;;    ifstr(i) $(Option) == "DEC21140"
;;     set Option1 = $($1)
;;     set Option = "NC100A"
;;    endif     
;;    ifstr(i) $(Option) == "DEC21143"
;;     set Option1 = $($1)
;;     set Option = "NC100A"
;;    endif     
    
    Ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
        set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option1)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    Ifstr(i) $(!NTN_InstallMode) == deinstall
        set StartLabel = removeadapter
    else-Ifstr(i) $(!NTN_InstallMode) == Update
        set StartLabel = UpgradeSoftware
    else-Ifstr(i) $(!NTN_InstallMode) == bind
        set StartLabel = bindingadapter
    else-Ifstr(i) $(!NTN_InstallMode) == configure
          Ifstr(i) $(ProductKey$(Option)Name) == $(!NTN_RegBase)
               Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                     goto ShellCodeError
               endif
               set Error = $($R0)
               set from = end
               set to = end
               goto nonfatalinfo
          else
               set StartLabel = configureadapter
          endif
   else
        set StartLabel = installadapter
        set OEM_ABANDON_OPTIONS = {}
        set OEM_ABANDON_SOFTWARE = FALSE
        set OEM_ABANDON_ON = TRUE
    endif
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)
installadapter = +
    ;Get NT OS Version

    OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion
    GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct
    CloseRegKey $(KeyVersion)
    Set NTVersion = *($(VersionStruct),4)
    set Help_Directory = "WINNT"
    Ifstr(i) $(NTVersion) == "3.10"
        set Source_Directory = "WINNT\WNT31"
    else-ifstr $(NTVersion) == "3.50"
        set Source_Directory = "WINNT\WNT35"
    else
        set Source_Directory = "WINNT\WNT40"
    endif
    Ifstr(i) $(NTVersion) == "3.51"
        set Source_Directory = "WINNT\WNT35"
    endif

    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKey$(Option)Name) $(MAXIMUM_ALLOWED) KeyProduct
    Ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKey$(Option)Name)
           Shell $(UtilityInf), VerExistedDlg, $(ProductSoftware$(Option)Title),+
               $(ProductVersion)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           goto end
        else
           Shell $(UtilityInf), CardExistedDlg
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
              goto ShellCodeError
           endif
           ifstr(i) $($R1) != "OK"
               set CommonStatus = STATUS_USERCANCEL
               goto end
           endif
           set OldVersionExisted = $(TRUE)
        endif
    Endif
    ifstr(i) $(DoCopy) == "YES"
        Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
        Ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Goto ShellCodeError
        Else-Ifstr(i) $($R0) == STATUS_FAILED
            Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
            endif
            set Error = $($R0)
               Goto fatal
        Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
        Endif
        Set SrcDir = $($R1)
        install "Install-Hlp"
    endif

    Ifstr(i) $(NTVersion) == "3.10"
         Goto adapteroptions
    else-ifstr $(NTVersion) == "3.50"
         Goto adapteroptions
    else
         Goto installproduct
    endif
configureadapter = +
   Ifstr(i) $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        Ifstr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
           Goto fatalregistry
        Endif
    Endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    Ifint $($ShellCode) != $(!SHELL_CODE_OK)
        Goto ShellCodeError
    Endif
    Ifstr(i) $($R0) != NO_ERROR
        Goto fatalregistry
    endif
    set KeyParameters = $($R2)
    CloseRegKey $($R1)
    Ifstr $(KeyParameters) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICEf
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(KeyParameters) ValueList
    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        Ifstr(i) $(ValueName) == "MediaType"
            set ConnectionIndex = $(ValueData)
        endif
        
    EndForListDo
    set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues),$(ConnectionIndex)))
    ifstr(i) $(ConnectionValue) == ""
        set ConnectionValue = *($(ConnectionList), 2)
    endif
adapteroptions = +
    set from = adapteroptions
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(Option$(Option)HelpFile) $(MinHelpId) $(Max$(Option)HelpId) $(Help$(Option)Id)
    ui start "InputDlg"
    ifstr(i) $(DLGEVENT) == "CONTINUE"
       set ConnectionIndex = $(Combo1Out)
       ui pop 1
    else-ifstr(i) $(DLGEVENT) == "BACK"
       set CommonStatus = STATUS_USERCANCEL
       ui pop 1
       goto end
    else
       ui pop 1
       goto end
    endif
    set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
    ifstr(i) $(!NTN_InstallMode) == configure
       goto updateparameters
    endif
installproduct =+
    StartWait
    Ifstr(i) $(NTVersion) == "3.10"
         set AdapterList = $($R1)
    else-ifstr $(NTVersion) == "3.50"
         set AdapterList = $($R1)
    else
         ifint $($(Option1)CFID) == $(NC100CFID)
         set VendorID = 4313    ; 10D9h
         set DeviceID = 1329    ; 0531h
         endif
         
         ifint $($(Option1)CFID) == $(NC100ACFID)
         set VendorID = 4887    ; 1317h
         set DeviceID = 2437    ; 0985h
        endif  
        
         ifint $($(Option1)CFID) == $(MX98715CFID)
         set VendorID = 4525    ; 11ADh
         set DeviceID = 49429   ; C115h
         endif  
        
                           
;;         ifint $($(Option1)CFID) == $(DEC21140CFID)
;;         set VendorID = 4113    ; 1011h
;;	 set DeviceID = 9       ; 0009h
;;	endif
	
;;         ifint $($(Option1)CFID) == $(DEC21143CFID)
;;         set VendorID = 4113    ; 1011h
;;	 set DeviceID = 25      ; 0019h 
;;	 endif

        
          Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
         ifint $($ShellCode) != $(!SHELL_CODE_OK)
              goto ShellCodeError
         endif
        
      
         ifstr(i) $($R0) == {}
              set Error = $(CANNOT_FIND_ANY_CARD)
              set CommonStatus = USER_CANCEL
              set from = end
              goto nonfatal
         endif
         set AdapterList = $($R0)
    endif
    ifint $(OldVersionExisted) == $(FALSE)
        Ifstr(i) $(DoCopy) == "YES"
           Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
           Ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Goto ShellCodeError
           Else-Ifstr(i) $($R0) == STATUS_FAILED
               Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
               ifint $($ShellCode) != $(!SHELL_CODE_OK)
                  goto ShellCodeError
               endif
               set Error = $($R0)
               Goto fatal
           Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
               Goto successful
           Endif
           Set SrcDir = $($R1)
        Endif
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
           Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
           endif
           set Error = $($R0)
           goto fatal
        endif
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftware$(Option)Name), +
            $(ProductSoftware$(Option)Name), +
            $(ProductSoftware$(Option)Title), $(STF_CONTEXTINFNAME), +
            $(ProductSoftware$(Option)ImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        Set SoftProductKey      = $($R1)
        Set SoftNetRuleKey      = $($R2)
        Set SoftServiceKey      = $($R3)
        Set SoftParameterKey    = $($R4)
        Set SoftLinkageKey      = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                           {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                           {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                           {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Title)},+
                           {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Description)},+
                           {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftware$(Option)Name)},+
                           {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftware$(Option)Type)},+
                            {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                            {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftware$(Option)BindForm)}, +
                            {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftware$(Option)Class)}, +
                            {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftware$(Option)SWBindable)}, +
                            {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif
    endif
    ForListDo $(AdapterList)

         Ifstr(i) $(NTVersion) == "3.10"
              Goto LagencyProcess
         else-ifstr $(NTVersion) == "3.50"
              Goto LagencyProcess
         else
              Goto PCIBusSupported
         endif

LagencyProcess =+
         set BusNum = *($($),1)
         set DeviceNum = *($($),2)
         set FunctionNum = 0       ;; temp until GetPCIinformation returns Function Number
         ForListDo $($(Option)AdapterCount)

            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardware$(Option)Name),$(STF_CONTEXTINFNAME),$(ProductKey$(Option)Name)
            ifint $($R4) != -1
                 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                 EndWait
                 CloseRegKey $($R1)
                 CloseRegKey $($R2)
                 CloseRegKey $($R3)
                 goto fatalregistry
            endif
            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option1)Title)},+
                                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option1)Description)},+
                                {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Name)},+
                                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 goto ShellCodeError
            endif
            set BusTypeNum = 5
            set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(AdapterType)},+
                                {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {ConnectionType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option1)CFID)}}

            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 goto ShellCodeError
            endif
            
                 Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                 ifint $($ShellCode) != $(!SHELL_CODE_OK)
                     goto ShellCodeError
                 endif
           
			    

            set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}+
                                {ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}+ 
                                { TxPacketDesc,       $(NoTitle), $(!REG_VT_DWORD),   75 }, +
                                { RxPacketDesc,       $(NoTitle), $(!REG_VT_DWORD),   120 }, +
                                { TxDmaDesc,          $(NoTitle), $(!REG_VT_DWORD),   150 }, +
                                { RxDmaDesc,          $(NoTitle), $(!REG_VT_DWORD),   40 }, +
                                { PacketsPerTxInt  ,  $(NoTitle), $(!REG_VT_DWORD),   10 }, +
                                { PacketsPerRxInd  ,  $(NoTitle), $(!REG_VT_DWORD),   10 }, +
                                { BurstLength,        $(NoTitle), $(!REG_VT_DWORD),   0 }}


            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
               goto ShellCodeError
            endif

            set TempProdName = """"$(ProductHardware$(Option)Name)$(AdapterNumber)""""
            set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
            set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                                {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                                {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                                {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                 goto ShellCodeError
            endif
            CloseRegKey $(HardNetCardKey)
            CloseRegKey $(HardNetRuleKey)
            CloseRegKey $(HardParameterKey)
         EndForListDo
         Goto TermProcess

PCIBusSupported =+
         set BusNum = *($($),1)
         set DeviceNum = *($($),2)
         set FunctionNum = *($($),3)
            Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
                $(DeviceNum), $(ProductHardware$(Option1)Description), $(ProductHardware$(Option)Name) "YES"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            ifstr $($R0) != "NO_ERROR"
                set Error = $($R0)
                goto fatal
            endif
            ifstr(i) $($R1) != "YES"
                Shell $(UtilityInf), AddHardwareComponent, $(ProductHardware$(Option)Name),$(STF_CONTEXTINFNAME),$(ProductKey$(Option)Name)
                ifint $($R4) != -1
                    Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
                endif
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                set RegistryErrorIndex = $($R0)
                Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                     EndWait
                     CloseRegKey $($R1)
                     CloseRegKey $($R2)
                     CloseRegKey $($R3)
                     goto fatalregistry
                endif
                read-syms FileDependentDlg$(!STF_LANGUAGE)
                SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(Option$(Option)HelpFile) $(MinHelpId) $(Max$(Option)HelpId) $(Help$(Option)Id)
                ui start "InputDlg"
                ifstr(i) $(DLGEVENT) == "CONTINUE"
                     set ConnectionIndex = $(Combo1Out)
                     ui pop 1
                else-ifstr(i) $(DLGEVENT) == "BACK"
                     set CommonStatus = STATUS_USERCANCEL
                     ui pop 1
                     goto end
                else
                     ui pop 1
                     goto end
                endif
                set ConnectionValue = *($(ConnectionValues), ~($(ConnectionList),$(ConnectionIndex)))
                Set HardNetCardKey      = $($R1)
                Set HardNetRuleKey      = $($R2)
                Set HardParameterKey    = $($R3)
                set AdapterNumber = $($R4)
                set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                                    {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option1)Title)},+
                                    {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option1)Description)},+
                                    {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Name)},+
                                    {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                                    {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
                Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                     goto ShellCodeError
                endif
                set BusTypeNum = 5
                set NewValueList = {{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(AdapterType)},+
                                    {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                     {ConnectionType,$(NoTitle),$(!REG_VT_DWORD),1},+
                                    {BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
                                    {AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$($(Option1)CFID)}}
                Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                
                    set NewValueList = {{ TxPacketDesc,     $(NoTitle), $(!REG_VT_DWORD),   75 }, +
                                        { RxPacketDesc,     $(NoTitle), $(!REG_VT_DWORD),   120 }, +
                                        { TxDmaDesc,        $(NoTitle), $(!REG_VT_DWORD),   150 }, +
                                        { RxDmaDesc,        $(NoTitle), $(!REG_VT_DWORD),   40 }, +
                                        { PacketsPerTxInt,  $(NoTitle), $(!REG_VT_DWORD),   10 }, +
                                        { PacketsPerRxInd,  $(NoTitle), $(!REG_VT_DWORD),   10 }, +
                                        { BurstLength,      $(NoTitle), $(!REG_VT_DWORD),   0 }}


                    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                    ifint $($ShellCode) != $(!SHELL_CODE_OK)
                        goto ShellCodeError
                    endif
                

                set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
                                    {ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
                Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                set TempProdName = """"$(ProductHardware$(Option)Name)$(AdapterNumber)""""
                set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
                set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                                    {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                                    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                                    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option1)}}
                Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                CloseRegKey $(HardNetCardKey)
                CloseRegKey $(HardNetRuleKey)
                set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
                                    {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
                                    {FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)}}
                Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
                CloseRegKey $(HardParameterKey)
            endif
TermProcess =+

    EndForListDo
    EndWait
    goto successful
updateparameters =+

    ;Get NT OS Version
    OpenRegKey $(!REG_H_LOCAL) "" $(VersionKeyName) $(MAXIMUM_ALLOWED) KeyVersion
    GetRegValue $(KeyVersion),"CurrentVersion",VersionStruct
    CloseRegKey $(KeyVersion)
    Set NTVersion = *($(VersionStruct),4)
    set Help_Directory = "WINNT"
    Ifstr(i) $(NTVersion) == "3.10"
        set Source_Directory = "WINNT\WNT31"
    else-ifstr $(NTVersion) == "3.50"
        set Source_Directory = "WINNT\WNT35"
    else
        set Source_Directory = "WINNT\WNT40"
    endif
    Ifstr(i) $(NTVersion) == "3.51"
        set Source_Directory = "WINNT\WNT35"
    endif
    set HardParameterKey    = $($R3)
    set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)},+
                        {ConnectionType,$(NoTitle),$(!REG_VT_DWORD),$(ConnectionValue)}}
    Ifstr(i) $(NTVersion) == "3.10"
        Goto U1label
    else-ifstr $(NTVersion) == "3.50"
        Goto U1label
    else
        Goto U2label
    endif
U1label =+
    ForListDo $($(Option)AdapterCount)
       Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
       ifint $($ShellCode) != $(!SHELL_CODE_OK)
           goto ShellCodeError
       endif
       CloseRegKey $(KeyParameters)
    EndForListDo
    goto successful

U2label =+
    Shell  $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    CloseRegKey $(KeyParameters)
    goto successful

bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    Ifstr(i) $(Product$(Option)KeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftware$(Option)Name)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftware$(Option)Name), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
UpgradeSoftware = +
     OpenRegKey $(!REG_H_LOCAL) "" $(ProductKey$(Option)Name) $(MAXIMUM_ALLOWED) KeyProduct
     Ifstr $(KeyProduct) != $(KeyNull)
           Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
           ifint $($ShellCode) != $(!SHELL_CODE_OK)
               Debug-Output "ShellCode error"
               goto ShellCodeError
           endif
           set !UG_Filename = $($R0)
           install "Install-Update"
           ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
               goto fatal
           endif
           SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
           SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
           CloseRegKey $(KeyProduct)
     else
           goto fatalregistry
     endif
     goto end
successful = +
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftware$(Option)Name), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftware$(Option)Name), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType      = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)
[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
       set !STF_NCPA_FLUSH_COPYLIST = TRUE
       CopyFilesInCopyList
    endif
    Exit
[Install-Hlp]
   set STF_VITAL = ""
   AddSectionFilesToCopyList Files-H$(Option) $(SrcDir)$(Help_Directory) $(!STF_WINDOWSSYSPATH)
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   Exit
[Install-Update]
   set STF_VITAL        = ""
   set STF_OVERWRITE    = "VERIFYSOURCEOLDER"
   AddSectionFilesToCopyList Files-H$(Option) $(SrcDir)$(Help_Directory) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
   AddSectionFilesToCopyList Files-$(Option) $(SrcDir)$(Source_Directory) $(!STF_WINDOWSSYSPATH)\drivers
   set !STF_NCPA_FLUSH_COPYLIST = TRUE
   CopyFilesInCopyList
   exit
[Source Media Descriptions]
    1  =  "Network Everywhere Fast Ethernet Adapter Driver(NC100)"
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha
[Files-Inf]
1,      oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[Files-NC100]
1,NC100.SY_ , SIZE=999, DECOMPRESS, RENAME=NC100.SYS

[Files-NC100A]
1,NC100A.SY_ , SIZE=999, DECOMPRESS, RENAME=NC100A.SYS

[Files-HNC100]
1,NC100.HL_ , SIZE=999, DECOMPRESS, RENAME=NC100.HLP
[Files-HNC100A]
1,NC100A.HL_ , SIZE=999, DECOMPRESS, RENAME=NC100A.HLP



[LanguagesSupported]
    ENG
[OptionsTextENG]
    NC100A = "Network Everywhere Fast Ethernet Adapter (NC100v2)"
    NC100  = "Network Everywhere Fast Ethernet Adapter (NC100)"
    MX98715  = "Linksys LNE100TX Fast Ethernet Adapter"
;;    DEC21140   = "Network Everywhere Fast Ethernet Adapter(DEC21140)"
;;    DEC21143   = "Network Everywhere Fast Ethernet Adapter(DEC21143)"
[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
               "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"



ProductSoftwareNC100Description = "Network Everywhere Fast Ethernet Adapter(NC100)"
ProductSoftwareMX98715Description = "Linksys LNE100TX Fast Ethernet Adapter"
ProductSoftwareNC100ADescription = "Network Everywhere Fast Ethernet Adapter(NC100A)"
;;ProductSoftwareDEC21140Description = "Network Everywhere Fast Ethernet Adapter(DEC21140)"
;;ProductSoftwareDEC21143Description = "Network Everywhere Fast Ethernet Adapter(DEC21143)"

FunctionNC100Title = "Network Everywhere Fast Ethernet Adapter(NC100) Setup"
FunctionMX98715Title = "Linksys LNE100TX Fast Ethernet Adapter Setup"
FunctionNC100ATitle = "Network Everywhere Fast Ethernet Adapter(NC100v2) Setup"
FunctionDEC140Title  = "Network Everywhere Fast Ethernet Adapter(DEC21140) Setup"
FunctionDEC143Title  = "Network Everywhere Fast Ethernet Adapter(DEC21143) Setup"

ProductHardwareNC100Description = "Network Everywhere Fast Ethernet Adapter(NC100)"
ProductHardwareMX98715Description = "Linksys LNE100TX Fast Ethernet Adapter"
ProductHardwareNC100ADescription = "Network Everywhere Fast Ethernet Adapter(NC100v2)"
;;ProductHardwareDEC21140Description  = "Network Everywhere Fast Ethernet Adapter(DEC21140)"
;;ProductHardwareDEC21143Description  = "Network Everywhere Fast Ethernet Adapter(DEC21143)"

ConnectionList  = ^(ConnectionChoices$(Option1), 1)
ConnectionValues = ^(ConnectionChoices$(Option1), 2)
NoList  = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle     = "Error: "$(Function$(Option1)Title)
ShellCodeErrorText      = "Shell Code Error."
CANNOT_FIND_ANY_CARD    = "Network card is not present in the system"
[DialogConstantsENG]
Help        = "&Help"
Exit        = "Cancel"
OK          = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel      = "Cancel"

[FileDependentDlgENG]
DlgText = "Choose the proper cable type for the "+
          "network adapter. Select [Help] for a detailled "+
          "description of the available options of the list."
DlgTemplate = "ADAP_PROTO_COMBO"
DlgType = "Combination"
Caption = $(Function$(Option1)Title)
Combo1Label = "&Media Type:"
Combo1List = $(ConnectionList)
Combo1Out  = $(ConnectionValue)
ComboListItemsIn  = {Combo1List}
ComboListItemsOut = {Combo1Out}
EditTextLim = ""
CBOptionsGreyed = {}
MinHelpId = 10
MaxNC100HelpId = 1140
MaxNC100AHelpId = 1080

HelpContext = $(Help$(Option)Id)

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.22