PCMCIA Driver installation for IBM PC110 under Microsoft Windows 95 Modified from the original IBM files by Daniel Basterfield, December 1998. This version of the installation package is the first BETA version. See my web page at http://www.basterfield.com/pc110/w95/w95-8.htm for updates. Copyright ~~~~~~~~~ This driver and associated files are sourced from diskette images downloadable from the IBM Japan FTP site; they are believed to be for an IBM PCMCIA Infrared card called the'SmartPC'. Please note that my packaging of these drivers is in no way intended to imply ownership of the enclosed software. It is known that this is the only Windows 95 PCMCIA driver which supports the peculiar PCMCIA device configurations often used by IBM PC110 owners; I have simply provided the driver in this format to aid its installation by non-Japanese users. No infringement of copyright is intended. All program code is (probably) the property of IBM Japan. For those interested, the two original README files have been retained, but renamed, as ReadMeJ.W95 and ReleaseJ.txt. As I do not read Japanese, I cannot say what these files discuss, but I assume they detail the software license and distribution conditions under which the original software package was made available. Features ~~~~~~~~ Provides support for the PC110 PCMCIA controller; Supports the use of PCMCIA type convertors with the drive used to boot Windows 95. Installation ~~~~~~~~~~~~ From 'Control Panel', select 'Add/Remove Hardware', click 'Next' Select 'No', click 'Next' Scroll down the list of hardware types, select 'PCMCIA socket', click 'Next' Click 'Have Disk...' Enter the location of the driver files, and select 'OK' Ensure that 'IBM PC110 PCMCIA Controller' is highlighted, and click 'Next' You will be warned that the I/O range has been set to 03E0-03E1 - this is fine; click 'Next' You will be asked to insert your original Windows 95 media, and files will be copied to the hard drive Click 'Finish' You will now be taken through the PCMCIA Wizard, which will help you configure 32-bit PCMCIA support. You may be prompted to allow a removal of previous drivers you have tried to install - this is OK. Once complete, shut down and power off, as advised. At reboot, you will have PCMCIA support. Feedback ~~~~~~~~ Please address any comments you have about this package to me at daniel@basterfield.com Have fun! Dan.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.